GPX CC312B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GPX CC312B (2 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com 1-888-999-4215Customer Service:
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Plug the built-in AC Power cord into an
AC power outlet to power the dock.
USER’S GUIDE
V:1445-1109-12
PM
SLEEP
AL 1
AL 2
REPEA T
CD
FM
AM
PROG
SNOO ZE / DIMMER POWER
MEM+
AL 1 /
REPEAT AL 2 /
PROG RAM
DISPLAY S OURCE
CLO CK
– T UNE +
VOLUME
OPEN / CLO SE
PM Indicator
Lights when the
time is in the PM.
LED Display
Alarm 1 Indicator
Lights when
alarm 1 is on.
Alarm 2 Indicator
Lights when
alarm 2 is on.
CC312B CD Clock Radio
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
‱ Reorient or relocate the receiving antenna.
‱ Increase the separation between the equipment and receiver.
‱ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‱ Consult the dealer or an experienced radio/TV technician for help.
‱ The apparatus shall not be exposed to dripping or splashing and that no
objects lled with liquids, such as vases, shall be placed on apparatus.
L’appareil ne doit pas ĂȘtre exposĂ© aux Ă©coulements ou aux Ă©claboussures et aucun
objet ne contenant de liquide, tel qu’un vase, ne doit ĂȘtre placĂ© sur l’objet.
‱ Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur ne doit pas ĂȘtre obstruĂ©e ou doit ĂȘtre facilement
accessible pendant son utilisation. Pour ĂȘtre complĂštement dĂ©connectĂ© de
l’alimentation d’entrĂ©e, la prise doit ĂȘtre dĂ©branchĂ©e du secteur.
‱ Battery shall not be exposed to excessive heat such as sunshine, re or the like.
Les piles ne doivent pas ĂȘtre exposĂ©es Ă  de forte chaleur, tel qu’à la
lumiĂšre du soleil, au feu ou autres choses de semblable.
‱ Caution marking is located at the rear or bottom of the apparatus.
Attention marquage est situĂ© sur le paneau arriĂšre ou infĂ©rieur de l’unitĂ©.
‱ The marking information is located at the rear or bottom of apparatus.
Le marquage est situĂ© sur le paneau arriĂšre ou infĂ©rieur de l’unitĂ©.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. When the provided plug
does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over. Unplug this apparatus during lightning
storms or when unused for long periods of time.
13. Refer all servicing to qualied
service personnel. Servicing
is required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen
into the apparatus, the apparatus
has been exposed to rain or
moisture, does not operate
normally, or has been dropped.
‱ CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
‱ WARNING:To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
‱ AVERTISSEMENT: Pour rĂ©duire le risque d’incendie ou de choc
Ă©lectrique, ne pas exposer cet appareil sous la pluie et l’humiditĂ©.
‱ CAUTION: Use of controls or adjustments or performance of procedures
other than those specied may result in hazardous radiation exposure.
‱ WARNING: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
‱ WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid
damaging the surface. Use a protective barrier between the unit and surface to protect the surface.
‱ CAUTION:Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
‱ PRÉCAUTION: Danger d’explosion si les piles sont remplacĂ©es de façon incorrect.
Remplacer les piles seulement par le mĂȘme type de pile ou l’équivalent.
‱ WARNING: Shock hazard - Do Not Open.
‱ AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
Mains plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur est utilisé pour déconnecter le systÚme.
La prise du secteur ne doit pas ĂȘtre obstruĂ©e ou doit ĂȘtre facilement
accessible pendant son utilisation. Pour ĂȘtre complĂštement dĂ©connectĂ© de
l’alimentation d’entrĂ©e, la prise doit ĂȘtre dĂ©branchĂ©e du secteur.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
No mezcle baterĂ­as viejas y nuevas.
No mezcle baterĂ­as alcalinas, estĂĄndar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between hazardous
mains voltage and user accessible parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
Introduction and Setup
FCC Warnings
Power
The battery backup is intended for
short power outages only. The clock
radio’s primary functions cannot run
off of the battery backup alone.
Requires 2, AAA-size, batteries (not included)
Battery Backup
Additional Warnings
WARNINGS AND PRECAUTIONS
Al 2/Program
In Off mode, press
and hold to begin
setting Alarm 2.
In On mode, press
to program a loaded
CD to play tracks in
a specied order.
Press to set a radio
station as a preset.
AL 1/Repeat
In Off mode, press
and hold to begin
setting Alarm 1.
In On Mode, press
to repeat the
current track.
Press twice to repeat
the entire album.
Play/Pause/Mem+
Press to play or
pause a loaded CD.
In radio mode, press
to cycle through
preset stations.
Tune +/-
Press to tune
the radio.
Press and hold to
search for the next
available station.
Display
Press to view the
time in Radio, AUX
or CD mode.
Source
Press to switch
between FM radio,
AM radio, AUX,
and CD modes.
Stop/Clock
Press to stop a
loaded CD.
Press and hold to
begin setting the time.
Power
Press to turn the
unit on or off.
Volume
Press to adjust
the volume.
Snooze/Dimmer
Press to delay the alarm
for several minutes.
Press to adjust the
brightness of the display.
AUX IN
USB CHARGE
Aux Input
USB Port
CD Door
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com 1-888-999-4215Customer Service:
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
1. Press the Power button
to turn the unit off.
2. Press and hold the Stop/Clock
button until the display begins to
blink, then release the button.
3. Press the Tune +/- buttons
to adjust the hour.
The PM indicator will light when
the hour is set in the PM.
4. Press the Stop/Clock button.
5. Press the Tune +/- buttons
to adjust the minute.
6. Press the Stop/Clock button
to nish setting the time.
1. Press the Power button
to turn the unit off.
2. Press and hold the or Al1 Al2
button until the display begins to
blink, then release the button.
3. Press the Tune +/- buttons
to adjust the hour.
The PM indicator will light when
the hour is set in the PM.
4. Press the the or Al1 Al2 button.
5. Press the Tune +/- buttons
to adjust the minute.
6. Press the the or Al1 Al2 button.
7. Press the Tune +/- buttons to
switch between Buzzer, AM
Radio, FM Radio and CD.
The display will indicate the following:
rF-FM Radio, rA-AM Radio, bb-Buzzer
and Cd-CD.
Use the Vol+/- buttons to
adjust the volume of the alarm,
except when set to Buzzer.
8. Once the set alarm time is
reached, the alarm will sound.
To set the other alarm, follow
the above steps and choose
the alarm not currently set.
1. Press the Power button
to turn the unit on.
2. Press the Source button to switch
between the AM and FM radio mode.
3. Press the Tune +/- buttons to adjust
the radio to the desired frequency.
4. Press and hold the Tune +/- buttons to
search for the next available frequency.
5. Press the Vol+/- buttons to
adjust the volume.
6. Press the to turn the radio off.Power
Clock and Sleep Timer Alarm Radio
Setting the Clock Setting the Alarm
1. Follow the instructions for Setting the
Alarm.
2. Press the or Al1 Al2 button until the
indicator is no longer lit.
Cancelling the Alarm
After the alarm sounds:
Press the Snooze/Dimmer button to delay the
alarm for several minutes.
OR
Press the Power button to turn the alarm off
until the set alarm time is reached again.
Snooze and Alarm Reset
Tuning the AM or FM Radio
1. Follow the instructions for Tuning the AM
or FM Radio.
2. Tune to the desired station.
3. Press the Al 2/Program button.
The display will ash.
4. Press the Tune +/- buttons to set as P1
- P10.
5. Press the Al 2 /Program to nish setting
the station as a preset.
Saving a Station as a Preset
1. Follow the instructions for Tuning the
Radio and Saving a Station as a Preset.
2. Press the Play/Pause/Mem+ button to
cycle through preset radio stations.
Tuning to a Preset Radio Station
Extend the to improve FM radio FM Antenna
reception.
An AM antenna is built into the clock radio. To
improve AM radio reception, adjust the position
of the clock radio.
Radio Reception
To download this User’s Guide in
English, Spanish, or French, or to get
answers to frequently asked questions,
visit the support section at:
www.gpx.com
Para descargar este Manual del
Usuario en inglés, español y francés, o
para obtener respuestas a preguntas
frecuentes, visite la secciĂłn de apoyo en
www.gpx.com
Pour tĂ©lĂ©charger ce guide de l’utilisateur
en anglais, espagnol ou français,
ou pour obtenir des réponses à des
questions fréquemment posées,
consultez la rubrique d’assistance sur
www.gpx.com
International Support
1. Open the .CD Door
2. Place a CD into the boombox,
label side facing up.
3. Close the .CD Door
CD
Loading a CD
1. Follow the instructions for Loading a CD.
2. Press the Source button to
switch to CD mode.
3. Press the Play/Pause button to
begin playing the loaded CD.
Playing a CD
1. Follow the instructions for Loading
a CD and Playing a CD.
2. Press the Stop button to stop
the CD during play.
3. Press the Program button.
“1--” will begin to blink on the display.
4. Press the Tune +/- buttons
to select a track.
5. Press the Program button to save
the selected track to the program.
6. Repeat steps 4 and 5 to
program up to 20 tracks.
Programming a CD
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the
AUX Input and the audio output on an
MP3 player or other audio device.
2. Press the Source button to
switch to AUX mode.
3. Use the native controls on the connected
MP3 player or other audio source to play
your audio through the CD Clock Radio.
AUX input
Using the Audio Input
Requires a USB cable (not included).
1. Make sure the unit is plugged into the wall.
2. Using the appropriate USB charging
cable (not included), connect one
end to the device and the other
to the USB Port on the unit.
Refer to the user’s manual for your
specic device for manufacturers
required charging amperage as well
as determining the appropriate cable
for your device before charging.
3. The device will now charge.
Note: Refer to the user’s manual for your
specic device for manufacturers required
charging amperage. High-ameperage
devices such as iPads will not charge.
USB
Charging a Device with the USB Port
1. Follow the instructions for Setting the
Clock.
2. Press the Snooze/Sleep button
repeatedly to set the sleep timer ( 90, 80,
70, 60, 50, 40, 30, 20, 10 min or OFF ).
3. Once the set sleep time has expired the
clock radio will automatically power off.
Setting the Sleep Timer


Product specificaties

Merk: GPX
Categorie: CD-spelers/recorder
Model: CC312B
Kleur van het product: Zilver
Stroombron: Batterij/Accu
USB-poort: Ja
Snooze functie: Ja
Gemiddeld vermogen: - W
Soort tuner: Digitaal
Backlight-kleur: Rood
Lijningang: Ja
MP3 afspelen: Ja
Ondersteunde frequentiebanden: AM, FM
Cassette deck: Nee
Compatibele batterij grootte: 9v
Type beeldscherm: LED

Heb je hulp nodig?

Als je hulp nodig hebt met GPX CC312B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding CD-spelers/recorder GPX

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder