Godox Quicker D Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Godox Quicker D (5 pagina's) in de categorie Flitser. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/5
82.A0QUD001-00 VB 说 明 手 册
Instruction Manual
中英文双语
Chinese English Bilingual
地址/Add: 深圳市宝安区福永镇福海大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuhai RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-25701197 / +86-755-25726373
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
FOREWORD
Thanks for choosing Quicker D series studio flashes. It is a durable and high-
performance strobe with complete functions to help professional photographers
create various lighting effects. This product is suited for wedding, advertisement,
portrait, and fashion photography. The perfect light source and A MUST in studios
and photo workshops! Among the benefits you will enjoy:
CONTENTS
01 Foreword
02 For Your Safety
02 Caution
03 Names of Parts
03 Body
03 Accessories
04 Separately Sold Accessories
04 Operations
04 Flash Preparation
04 Power Connection
04 Modeling Lamp
05 Power Output Control
05 Test Button
05 Sync Triggering
05 Slave Trigger Model
05 Buzz Function
05 Memory Function
06 Wireless control Function
06 Tube Replacement
07 Technical Data
07 Maintenance
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FOR YOUR SAFETY
To prevent damage to the product or injury to you or to others, read the following
safety precautions in their entirety before using the equipment. Keep these safety
instructions where users can read them for reference.
Do not disassemble or modify
There are high-voltage components inside the unit. Failure to observe this precaution
could result in electric shock or product malfunction. Should the product break open as
the result of a fall or other accident, send the defective back to authorized service
centers for inspection and maintenance.
Keep dry
Do not handle with wet hands or immerse in or expose to water or rain. Failure to
observe this precaution could result in fire or electric shock.
Keep out of reach of children
This device contains small parts that may pose a choking hazard. Consult a physician
immediately if a child swallows any part of this device.
Do not expose to high temperature
Do not leave the device in areas subject to extremely high temperature. Failure to
observe this precaution could result in fire or damage to the housing or internal parts.
CAUTION
After 30 continuous shots at full power, the flash should be cooled down for about 3
minutes. Overheating will occur if it is used continuously without cooling down.
Do not use the modeling lamp for a long time. Otherwise flammable accessories such
as softbox mounted on the flash head will get burnt. The flash can be used
continuously at full power for 10 minutes, and then it should be cooled down for one
minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire over-
frequent flashlight (not over six times in one minute). Overheating will result in
damages for strobe housing and studio light.
Do not touch the lamp cap when the flash or modeling lamp is working, as it will give
out heat, leading to high surface temperature.
Do not touch two terminals of the tube outlet as there is high voltage inside. Wear
insulated gloves when replacing the tube or modeling lamp.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Do not flash directly towards naked eyes (especially those of babies), otherwise it may
lead to visual impairment.
Disconnect from the power supply when it is not in use.
- 02 -- 01 -
Precise output control on LED display, 30 steps from 5.0-8.0 by 0.1 increment;
High-qualified modeling lamp, 150W output adjustable;
Outstanding output stability, a tolerance of 2% under the same output;
Anti-preflash function, enables synchronization with cameras having a one-preflash firing
system;
Automatic power discharge when the flash output is adjusted from high to low;
Adjusted parameters intelligently remembered after 3s and automatically recovered after
a restart.
Flash output on/off and power level,modeling lamp and buzzer on/off,and flash triggering
can be controlled by using Godox FT series romote control.
≤
15
04
01
07
02
08
19
14
09
10
03
05
06
11
12
16
17
13
18
Body
NAMES OF PARTS
01. AC Power Socket 11. Modeling Lamp Indicator
02. Sync Cord Jack 12. Buzz Indicator
03. Power Switch 13. Slave Triggering Indicator
04. Modeling Lamp Output Controller 14. Test Indicator Lamp
05. Flash Output Controller 15. Light Sensor
06. Modeling Lamp Button 16. Fuse
07. Sound Button 17. Mounting Bracket
08. Slave Model Button 18. Umbrella Input
09. Test Button 19. Direction Adjusting Handle
10. Digital Display 20. Wireless control port
1. Sync Cord
2. Power Cord
3. Standard Reflector
4. Lamp Cover
5. Glass Protection Cover
6. Modeling Lamp
7. Instruction Manual
Accessories
- 03 -
Separately sold accessories
The product can be used in combination with the following accessories sold separately,
so as to achieve best photography effects:
Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
OPERATIONS
Flash Preparation
Power Connection
Modeling Lamp
1. Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
reflector, press the blue
release button on the flash
head and turn the standard
reflector counter-clockwise
to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket (17)
for a good angle and make sure it is tightened and fixed. Use the direction adjusting
handle (19) to adjust the flash to a desired direction. Umbrella input (18) is for different
photographic umbrellas to put in.
Use the power cord to connect the flash to an AC power source and turn on the power
switch (3). The lamp on the power switch turns on, indicating it’s connected.
Modeling lamp button (6) controls the modeling lamp status: Modeling lamp indicator
(11) is on, indicating the modeling lamp is on; Modeling lamp indicator (11) is off,
indicating the modeling lamp is turned off. Modeling lamp output controller (4) can be
used to adjust the modeling lamp power output. Modeling lamp will be off automatically
after lighting for 2 hours, in case overheating occurs when user is not nearby to turn it
off.
- 04 -
5
4
3
2
1
6
20
Product specificaties
| Merk: | Godox |
| Categorie: | Flitser |
| Model: | Quicker D |
Heb je hulp nodig?
Als je hulp nodig hebt met Godox Quicker D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flitser Godox
6 Oktober 2024
5 September 2024
30 Juli 2024
30 Juli 2024
30 Juli 2024
5 Juli 2024
4 Juni 2024
18 Mei 2024
18 Mei 2024
4 Maart 2024
Handleiding Flitser
- Flitser Braun
- Flitser Sony
- Flitser Panasonic
- Flitser Nikon
- Flitser Canon
- Flitser Olympus
- Flitser Dorr
- Flitser Easymaxx
- Flitser Fujifilm
- Flitser Kenko
- Flitser Konica Minolta
- Flitser Konig
- Flitser Leica
- Flitser Logilink
- Flitser Metz
- Flitser Minox
- Flitser Neewer
- Flitser Nissin
- Flitser Pentax
- Flitser Pulsar
- Flitser Quantum
- Flitser Ricoh
- Flitser Rollei
- Flitser SeaLife
- Flitser Sigma
- Flitser Sunpak
- Flitser Triopo
- Flitser Vivitar
- Flitser Yongnuo
- Flitser Goodram
- Flitser Vello
- Flitser Manfrotto
- Flitser Cullmann
- Flitser Xit
- Flitser Hähnel
- Flitser Ikan
- Flitser GVM
- Flitser Genaray
- Flitser Profoto
- Flitser Anton/Bauer
- Flitser Impact
- Flitser Lume Cube
- Flitser Aputure
- Flitser Xantech
- Flitser Bolt
- Flitser Elinchrom
- Flitser Rotolight
- Flitser SWIT
- Flitser COLBOR
- Flitser Cactus
- Flitser PolarPro
- Flitser ANDYCINE
- Flitser Westcott
- Flitser Ikelite
- Flitser Kaiser Fototechnik
- Flitser Lastolite
- Flitser FoxFury
- Flitser Jinbei
- Flitser Quadralite
Nieuwste handleidingen voor Flitser
1 Oktober 2024
30 September 2024
31 Juli 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024
16 Juli 2024
9 Juli 2024
9 Juli 2024