Gigabyte GV-R736OC-2GD Handleiding

Gigabyte Videokaart GV-R736OC-2GD

Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GV-R736OC-2GD (15 pagina's) in de categorie Videokaart. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

AMD® Graphics Accelerator

User’s Manual

Rev. 104

mitted in any form without the expressed, written permission of .GBT

Trademarks

Third-party brands and names are the properties of their respective owners.

Notice

Please do not remove any labels on this graphics card. Doing so may void the warranty of this card.

Due to rapid change in technology, some of the speciﬁ cations might be out of date before publication of this this

manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor

does the author make a commitment to update the information contained herein.

Rovi Product Notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended

for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering

or disassembly is prohibited.

- 3 - Introduction

1. Introduction

1.1. Minimum System Requirements

• Hardware

- Intel®Pentium®4 / CoreTM 2 or AMD AthlonTM / PhenomTM

- 1 GB or more of system memory for best performance

- Optical drive for software installation (CD-ROM or DVD-ROM drive)

• Operating System

- Windows ® 8

- Windows ® 7

- Windows ®

Vista

- Windows®

XP with Service Pack 2 (SP2)

- Windows ®

XP Professional x64 Edition

- 4 -AMD Series Graphics Accelerator

2.2. Hardware Installation

Step 3.

Plug the display cable into your card; then turn on the computer and monitor. To connect a ﬂ at panel display

to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics card, use the

HDMI connector. To connect a DisplayPort monitor to your graphics card, use the DisplayPort connector.

Step 1.

Locate the PCI Express x16 slot. If necessary, remove the metal

cover from this slot; then align your graphics card with the PCI

Express x16 slot, and press it in firmly until the card is fully

seated.

Step 2.

Replace the screw to fasten the card in place, and replace the

computer cover.

Make sure that the gold edge connector of the graphics card is

securely inserted.

After installation, remember to connect the power cable to your graphics card, or the system

will not boot. Do not touch the card when it’s operating to prevent system instability.

You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for

detailed instructions.

To Flat Panel Display To Flat Panel Display To HDMI Monitor

To D-sub Monitor

To Mini HDMI Monitor

To Mini DisplayPort Monitor To Mini DisplayPort Monitor

Product specificaties

Merk:	Gigabyte
Categorie:	Videokaart
Model:	GV-R736OC-2GD
Breedte:	112 mm
Diepte:	146 mm
Hoogte:	34 mm
Frequentie van processor:	1050 MHz
Vormfactor:	Full-Height/Half-Length (FH/HL)
Maximum resolutie:	4096 x 2160 Pixels
Aantal HDMI-poorten:	1
Resolutie (maximum analoog):	2048 x 1536 Pixels
Volledige HD:	Ja
Resolutie (maximum digitaal):	4096 x 2160 Pixels
DVI-D poorten:	1
Aantal DisplayPorts:	1
Kloksnelheid geheugen:	6000 MHz
DVI-I poorten:	1
Grafische geheugen:	2 GB
Soort aansluiting:	PCI Express 3.0
Type koeling:	Actief
Grafische processor familie:	AMD
Grafische processor:	Radeon R7 360
Grafische adapter, soort geheugen:	GDDR5
Geheugenbus:	128 Bit
OpenGL versie:	4.5
DirectX versie:	12.0
Minimum system power voorraad:	500 W
Dual Link DVI:	Ja
Maximum displays per videocard:	4
PhysX:	Nee
Brackethoogte:	Full-Height (FH)
Processor boost clock speed:	1200 MHz
Extra geleverde power connectors:	1x 6-pin
Dubbel VGA:	Nee