Gigabyte GeForce GTX 1650 D6 OC 4G Handleiding

Gigabyte Videokaart GeForce GTX 1650 D6 OC 4G

Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GeForce GTX 1650 D6 OC 4G (8 pagina's) in de categorie Videokaart. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Ninebot Gokart Kit User Manual

Welcome

WARNINGS

Thanks for choosing the Ninebot Gokart Kit, hereinafter referred to as the Gokart Kit.

The Gokart Kit is an accessory developed speciﬁcally for the Ninebot by Segway products listed below. When the Gokart Kit is attached to the appropriate Ninebot by

Segway product it becomes an electric Gokart. You must read and follow these instructions as well as the instructions provided with the applicable Ninebot by Segway

product.

The Gokart Kit is only suitable for use with the Ninebot by Segway

miniPRO (hereinafter collectively referred to as the miniPRO) and

Ninebot S.

Other Ninebot and Segway self-balancing models are not supported.

Packing List & Diagram

Frame

User Manual & Limited Warranty

2miniPRO Adapter Pad

miniPRO adapter pad

3Hex Wrenches

Tools provided to remove the steering

bar bracket

6Steering wheel quick

release components

7Power extension cord

4mm 5mm

6 (AA) Batteries

miniPRO Ninebot S

Ninebot by Segway miniPRO and Ninebot S

are sold separately. Please contact your

reseller for more information.

User Manual Limited Warranty

Riding Safety

V 1.0

www.segway.com

1. The Gokart is a recreational product. Before mastering riding skills, you need to practice. Neither

Ninebot (Ninebot (Beijing) Tech Co., Ltd. or its subsidiaries and aﬃliates) nor Segway Inc. is responsible

for injuries or damage caused by a driver's inexperience or failure to follow the instructions in this User

Manual or in the New Rider Tutorial.

2. Remember as with any mode of transportation, that whenever you drive the Gokart, you risk injury or

death from loss of control, collisions, and falls. You can reduce the risk by following all the instructions

and warnings in this manual, but you cannot eliminate all the risks.

3. The Gokart kit contains small parts which can create a choking hazard. Keep small children away

from the Gokart.

Pre-Ride Checklist and Preparing for Your Drive:

1. Before each drive check and tighten any loose parts, fasteners, straps, and replace damaged

components.

2. To avoid accidents caused by improperly inflated or worn tires, check the tire pressure on the

miniPRO tires and wear on all tires before each ride. Do not touch moving or spinning tires.

3. Ensure that the battery level and vehicle operating status are within the speciﬁcations contained in

the manual of the model being used with the Gokart Kit.

4. Carefully read, understand and follow all instructions in this User Manual and watch and understand

the New Rider Tutorial in the App before your ﬁrst drive. Do not attempt to drive the Gokart if you are

not able to drive in accordance with the instructions in this Manual or you risk serious injury or death.

5. Always wear appropriate shoes, clothing, and protective gear when riding. Protective gear includes

the use of a helmet, knee pads, and elbow pads (not included). Use an approved bicycle or skateboard

helmet that ﬁts properly with the chin strap in place, and provides protection for the back of your head.

Remove or tie back anything loose (i.e. clothing, hair, jewelry, etc.) that could be caught in any moving

parts. Always fasten the seat belt before riding and ensure it is securely tightened. Loose seat belt can

get stuck in the wheels.

6. Do not turn the Gokart on unless it is parked on flat ground.

Where to Drive:

1. When entering public spaces, always comply with the local laws and regulations. Only ride in areas

where you have ﬁrst obtained permission from the property owner.

2. The Gokart is designed to be driven on a dry, flat, hard-surface, free of obstacles, bumps, holes, and

other hazards.

3. The kinds of surfaces which are appropriate for safe use of the toy.

4. Do not drive on roadways, near motor vehicles, pedestrians, bicyclists, animals, on or near steep

inclines or steps, curbs, near swimming pools, through puddles or other bodies of water. Use caution

when riding in areas with trees, posts, or fences. You must leave suﬃcient space between you and those

To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on

or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never

allow more than one rider.

Always fasten seat belt, wear a helmet with long hair tucked inside and wear protective gear. Loose

clothing or hair can become stuck in wheels or block your vision. Wear appropriate closed toed, secure

footwear. No loose clothing.

Do not drive in rain or snow. When not in use, park the Gokart indoors to avoid water entering and

damaging the vehicle.

Comply with all local laws and regulations.

Correct dress code

Wear a helmet

Tie up long hair

(if any)

Zip up the zipper

No long skirts

Wear flat shoes

Wear

protective

gear

No Loose

long Hair

Handbrake

handle

Seat

Steering wheel

Battery compartment

Scalable structure of frame

Throttle (right) Brake (left)

Status indicator

Headlight

Steering wheel quick release components

Electrical connection

cable plug

Attachment straps

Connection tube

(with frame adjustment marking)

Strap ﬁxing hole

Seat belt

When unpacking your Gokart, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see Contact).

Please retain the box and packaging materials in case you need to ship your Gokart in the future.

Always power oﬀ your Gokart and unplug the power source before cleaning.

items to be able to safely pass them.

5. The Gokart is never to be ridden indoors.

6. Do not ride the Gokart at night.

7. Do not ride on any ramp or incline that exceeds the maximum slope.

8. Do not ride in the snow, rain, or on roads which are wet, muddy, icy, or that are slippery for any

reason. Do not ride over obstacles (including, but not limited to, sand, loose gravel, or sticks).

Doing so could result in a loss of balance or traction and could cause a collision.

9. Do not allow the Gokart to get wet. You risk damage to the batteries and potential for a ﬁre or

explosion due to a wet battery pack.

How to Drive:

1. As with other vehicles, faster speeds require longer braking distance. Sudden acceleration or

braking on smooth surfaces could lead to wheel slip and collisions.

2. Be cautious and always keep a safe distance between you and others when driving. Be alert and

slow down when entering unfamiliar areas.

3. Do not allow anyone to drive your Gokart on his/her own unless he/she has carefully read this

manual, and followed the New Rider Tutorial. The safety of new riders is your responsibility. Assist

new riders until they are comfortable with the basic operation of the Gokart and make sure each

new rider wears a helmet and other protective gear.

4. To avoid distraction when driving your Gokart, do not use a cell phone, camera, headphones, ear

buds or perform any other activities while driving.

5. Be alert! Scan both far ahead and in front of you. Your eyes are your best tool for safely avoiding

obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose

gravel, and ice). Use caution when transitioning over diﬀering terrain.

6. When approaching or crossing an intersection, road, corner, or gate of any kind, always slow

down and yield to others.

7. Do not drive at unsafe speeds. You must always use good judgment based on your driving skills

and the surrounding environment.

8. Always slow down when turning. Turning at a high speed can cause loss of control, possible

vehicle turn-over, and risk of injury or death.

9. Do not perform stunts of any kind. All four tires must remain on the ground at all times.

10. While driving the Gokart, always remain seated with arms and legs inside the Gokart.

11. Do not carry cargo of any kind.

12. If the Gokart makes an abnormal sound or signals an alarm while driving, stop immediately and

do not use the Gokart or miniPRO until the cause of the noise/alarm has been identiﬁed and

corrected. Contact after-sales service for assistance.

Who Should Drive:

The manufacturer recommends drivers be at least 14 years old. Children under the age of 16

should only drive under adult supervision. Always follow these safety instructions:

A. People who should not drive the Gokart include:

i. Anyone under the influence of alcohol, drugs, or intoxicants.

ii. Anyone who suﬀers from disease that puts himself/herself at risk if he/she engages in

strenuous physical activity.

iii. Anyone whose weight is outside the stated limits (see Speciﬁcations).

iv. Pregnant women.

B. The Gokart is intended for one person only.

C. To drive safely, you must be able to clearly see what is in front of you and you must be

clearly visible to others.

D. Drivers must be able to hear the environment around them.

After Each Drive:

1. Park the Gokart on flat ground and power it oﬀ. Failure to do so could cause the Gokart to

move when exiting potentially causing injury to you and others around you.

2. Allow the Gokart to cool down before charging. Do not attempt to charge the Gokart, if it,

the charger, or the power outlet is wet. Follow instructions in the miniPRO User Manual.

3. As with any electronic device, use a surge protector when charging to help protect your

Gokart from damage due to power surges and voltage spikes.

4. Only use the charger speciﬁed by the manufacturer. Do not use a charger from any other

product.

5. Only use Ninebot or Segway approved parts and accessories. Do not modify your Gokart.

Modiﬁcations to your Gokart could interfere with the operation and performance of the

Gokart, which may result in serious injury and/or damage, and could void the Limited

Warranty.

Maintenance and Storage:

1. Be sure the Gokart is powered oﬀ before performing any maintenance or when installing or

replacing parts.

2. When installing components, use proper and suﬃcient force until the component is secure.

If the installation is too loose or too tight, the Gokart may not function properly resulting in

the potential for injury to you or others or damage to, or malfunction of, the Gokart.

3. Install batteries for the Gokart in accordance with the instructions and ensure that the

positive and negative electrodes of the batteries are installed correctly. Only use the

batteries speciﬁed by the manufacturer. Do not charge the batteries as this may cause a risk

of ﬁre or explosion. Do not mix old and new batteries. Do not mix alkaline, standard

(carbon-zinc), or rechargeable batteries. When the batteries are dead, purchase and replace

them yourself.

4. Follow all instructions contained in the miniPRO User Manual when performing mainte-

nance on the miniPRO.

5. Do not use a strong water flow or high-pressure hoses to clean the Gokart. Avoid

getting water in the charge port. If your Gokart has been exposed to heavy rain store it

outdoors away from buildings and people but protected from the elements until it is dry.

6. Store your Gokart indoors. The miniPRO should be stored in an environment where the

temperature is no higher than 122°F (50°C) or lower than -4°F (-20°C). If the temperature

of the storage environment is lower than 32°F (0°C), do not charge it until after placing it

in a warm environment (over 50°F (10°C).

The data and parameters of the Ninebot Gokart vary with diﬀerent models. They are

subject to change without prior notice. Go to www.segway.com for updated information.

Located under the frame. Remove the attachment

strap before removing from the frame.

Risk of death or serious injury from collisions and falls. To reduce the risk of injury user and/or adult must

read and follow the user manual.

Metal mold×2

Used for miniPROUsed for Ninebot S

Metal mold×2 M5 Screw×2 M6 ScrewNut×2 Steering bar bracket

removal tool

Bumper

Scan the QR code below Download in Google Play Store

or Apple's App Store

Remove the steering bar from the miniPRO Assembling and disassembling the Gokart This assembly is for adults only. Do not power on the miniPRO during assembly or disassembly.

Assembly

Check the status of the miniPRO

Operating the miniPRO

Activate the Gokart Use and charging

* Your mobile phone requires Bluetooth 4.0 or later, iOS system 8.0

or later, or Android™ 4.3 or later.

For your safety, the default values of the Gokart speed and

sensitivity are set to low. Use the app to learn how to drive

safely, then the speed limit can be gradually raised.

Follow the relevant charging instructions in the manual and the common battery maintenance and safety knowledge for

maintenance. Ninebot products are designed with overheat protection. If the vehicle temperature exceeds 104 °F (40°C),

the vehicle cannot be charged as normal. Wait until the vehicle cools to below 104 °F (40°C) before charging.

Speciﬁcations

Assembling your Gokart (Requires two adults to assemble)

Update the miniPRO ﬁrmware

Located under the frame. Remove

the attachment strap before

removing from the frame.

The installation direction is as shown below.

Be sure to align the steel frame with the

adapter pad as shown in the enlarged view.

Driving the Gokart

Install the app

Download the Segway-Ninebot app (hereinafter referred to as the app)

by any of the following methods:

Refer to the chapter “Maintenance” in the miniPRO User Manual to ensure that the tire

performance, the battery level, and the running status of the miniPRO are normal.

Turn on the phone's Bluetooth.

Press the power button to turn

on the miniPRO.

Open the app to search for and

connect your miniPRO.

e. Use the tools provided to remove the steering bar bracket from the miniPRO.

The steps are as follows:

Segway-Ninebot App

Pair your mobile phone and the miniPRO

Segway-Ninebot App

Disassembly

In the upper right corner of the app, tap Settings Firmware Update.

On the Ninebot settings page, tap "Gokart mode".

Enable "Gokart mode".

Update ﬁrmware and switch modes

Searching

Gokart0001

Gokart Mode

Gokart Kit i nstal lation tutori al

About Gokart

Vehicle

Firmware

Update

Gokart

Mode

Press the power button on the miniPRO to turn on the Gokart.

The Gokart will automatically power oﬀ when idle for 10 minutes.

Open the Segway-Ninebot APP and connect your Gokart.

Follow the instructions in the app to activate the Gokart

and complete the corresponding tutorial and exercises.

Place the steering

bar bracket

removal tool into

the screw holes on

the steering bar

bracket.

Fasten the two metal molds onto

the lower part of the steering bar

bracket by inserting the two nuts

from the right and the two M5

screws from the left; tighten with

a 4mm hex wrench.

Insert the M6 screw into the

screw hole on the front of

metal molds, tightening with

a 5mm hex wrench, continue

tightening the screw until the

steering bar bracket falls oﬀ

the miniPRO.

If lifting the frame by yourself, do not lift the

backside more than 19° or you may

damage the bumper.

Install the miniPRO adapter pad.

Plug the power extension cord into the charging port of the miniPRO,

tighten by turning clockwise.

Once fully assembled, make sure:

Place the Gokart frame on the miniPRO.

Pass the attachment straps through

the bottom of the miniPRO and the

strap ﬁxing holes. Tighten the straps.

4Plug the electrical connection

cable of the Gokart into the

power extension cord. Align

the groove and do not force

the cord in.

Stretch the frame and adjust the length of the body:

Adjust the steering wheel height:

Install the Gokart batteries.

Power

button

Power

button

Please make sure the location of the logo

is correct on the straps. If not, return to

step for adjustment. Charge ports must be dry.

Press the miniPRO's power button

to turn oﬀ the Gokart.

Disconnect the electrical connection

cable.

Refer to the assembly procedure and

carry it out in reverse order.

a With both hands holding the steering wheel and the seat,

stretch the frame out to a suitable position along the

horizontal direction of the connection tube.

b Align the scalable structure of the frame with the

marking on the connection tube.

c Positioning: Use a 5mm hex wrench to press the two

screws into the holes on the left and right connection

tube in order, as shown in the ﬁgure above (The screw is

set to a depth of about 1cm for successful position).

d Tighten the 4 screws.

a Raise the steering wheel to a

suitable height.

b Insert the quick release

screw into the hole of the

corresponding height.

c Tighten the quick release nut.

d Press to ﬁx the steering wheel

quick release components.

e Ensure the steering wheel does

not shake. Otherwise, repeat

the steps b, c, d, e.

Unscrew the battery

compartment cover and

insert batteries into the

compartment. Close and

tighten the cover.

To avoid issues that may be

caused by corrosion,

remove the batteries if not

using the Gokart for an

extended period of time.

The miniPRO adapter pad and the mini-

PRO are facing the correct direction.

The attachment straps are properly at-

tached and tightened.

The electrical connection cable is

plugged into the power extension cord.

The body length and steering wheel

height is appropriate for the rider.

The battery compartment is closed.

If anything appears to be incorrect,

stop using the Gokart and

contact after-sales

service.

< 19°

Acceleration: lightly press the throttle (right

pedal) to go forward.

Deceleration: lightly press the brake (left

pedal) to decelerate.

Steering: steer the Gokart by slightly turning the

steering wheel clockwise or counterclockwise.

Do not pump the brake pedal to decelerate.

Driving

Sitting on the seat, buckle the left and

right parts of the seat belt in front of you.

Fastening the seat belt

When the Gokart is stopped, double-press

the brake (left pedal). After you hear a beep,

the Gokart has switched to reverse mode.

Press the throttle to drive the Gokart in

reverse. Double-press the brake (left pedal)

again to return to forward mode.

Reversing

In the event of a situation that requires an

emergency stop, pull the hand brake handle on

the right side of the Gokart to engage the

emergency brake.

Emergency braking

Make sure the vehicle is completely stopped

before getting oﬀ. Press the miniPRO's power

button to turn oﬀ the Gokart.

Shutdown

Charge the Gokart by plugging the miniPRO

power cord into the power extension cord.

Do not connect the charger if the charge

port or power cable is wet.

Charging

Product

Supported

models Name and model

Size

Weight

Driving

Machine

Parameters

Tires

Light

Brake

Front

compartment

battery

[3]

Name Ninebot Gokart Kit

N4MZ98

43.1×34.1×20.1 in (1095×865×510 mm)

Ninebot by Segway miniPRO (Model: N3M260, N3M320)

NinebotS (Model:N3M240)

After extension (Max status): 54×32×24 in (1383×822×600 mm); before extension

(Min status): 40×32×18 in (1004×822×459 mm)

Model

Vehicle size

Package size

Max payload 220 lbs (100 kg)

61.3 lbs (27.8 kg)

51-75 in (130-190 cm)

14+ years old

15 mph (24 km/h)

5 mph (8 km/h)

2 mph (3 km/h)

9 mile (15km)

2.1:1

1.6 in (40 mm)

15°

14°F~ 104°F 40 (-10～℃)

-4°F °F 50~ 122 (-20～ ℃)

IPX4

6 AA Batteries

20 ft (6 m)

Tire width: 3 in (80 mm); flatness ratio: 60%; hub diameter: 5 in (127 mm)

Non-inflatable hollow tire

0.2 Watt white LED light bar

Electronic brake + mechanical handbrake

Hardened road, flat road surface, slopes below 15°

The indicator comes in three colors: blue, yellow, and red. Blue means that the vehicle is in normal

condition. Yellow means that the vehicle needs to be activated or the batteries in the front compartment

need to bereplaced. Red means that the vehicle has a performance failure, and you need to open the

app to check the cause of the failure and contact the after-sales service.

Net weight

Height requirement

Recommended Age

Speed limit

Novice speed limit

Reversing speed limit

Steering ratio

Ground clearance

Traversable Terrain

Operating temperature

Storage temperature

IP rating

Model Quantity/

Front tires

Type

Headlight

Status indicator

Braking method

Braking distance[4]

Maximum slope [2]

Typical Range[1]

Power extension

cord

Four screws

already inserted

into the screw

holes.

Do not plug the power

extension cord into the

miniPRO if the power

extension cord or charge

port is wet.

Searching

MiniPro0001

Activate the

Gokart

a. Press the power button

to turn oﬀ the miniPRO.

b. Unlock the steering bar

tool-free release, remove

the steering bar.

c. Remove the rubber plug on

the steering bar bracket.

d. Use a 4 mm hex wrench

to remove the screws in

the steering bar bracket

and pull oﬀ the bracket.

Disassembly is completed

after removing the steering

bar bracket. If you cannot

remove the bracket by

hand, continue to step e.

The Gokart is assembled by attaching the Gokart Kit to a miniPRO.

Before assembly of the Gokart, please review the miniPRO User Manual

and follow all instructions contained in it. Once the miniPRO has been

properly activated and charged you can begin assembly of the Gokart.

* This ﬁrmware update does not involve activation of the miniPRO. If you need to use the miniPRO,

please refer to the miniPRO User Manual for related operations.

Before assembly, update the app's ﬁrmware and turn

on Gokart mode.

[1] Typical Range : Under the

circumstances of full power, 154

lbs (70kg) load, and 77°F(25℃)

ambient temperature, and

measured on a flat road at an

average speed of 9 mph (15

km/h).

[2] Maximum slope: Refers to the

maximum slope that a 220 lbs

(100 kg) driver can climb at a

speed not faster than 3 mph (5

km/h).

[3] Front compartment battery:

The battery compartment inside

the frame that is used to power

the frame indicator/headlight.

When the battery is low, the blue

indicator light turns yellow and

blinks. You need to replace the

batteries yourself.

[4] Braking distance: Under the

circumstances of full power, 154

lbs (70kg) load, and measured on

a flat hard road at an average

speed of 12.4 mph (20 km/h).

Note: You can also open the App

for more speciﬁc tips.

miniPRO Assembly

Instructions

Scan the QR code on the

right to review Assembly

Instructions.

This manual uses the miniPRO as an example. If you have a Ninebot S, please watch the

video by scanning the right QR code.

Ninebot S Assembly

Instructions

Product specificaties

Merk:	Gigabyte
Categorie:	Videokaart
Model:	GeForce GTX 1650 D6 OC 4G
Kleur van het product:	Zwart
Frequentie van processor:	1635 MHz
Maximum resolutie:	7680 x 4320 Pixels
Aantal HDMI-poorten:	1
HDMI versie:	2.0b
Aantal sloten:	2
DVI-D poorten:	1
Geïntegreerde TV Tuner:	Ja
Aantal DisplayPorts:	1
Aantal ventilatoren:	2 ventilator(en)
Snelle installatiehandleiding:	Ja
Kloksnelheid geheugen:	12000 MHz
Grafische geheugen:	4 GB
DisplayPort versie:	1.4
Soort aansluiting:	PCI Express 3.0
Type koeling:	Actief
Grafische processor familie:	NVIDIA
Grafische processor:	GeForce GTX 1650
CUDA:	Ja
Grafische adapter, soort geheugen:	GDDR6
Geheugen bandbreedte (max):	192 GB/s
Geheugenbus:	128 Bit
OpenGL versie:	4.6
DirectX versie:	12.0
Minimum system power voorraad:	300 W
Stroomverbruik (typisch):	- W
CUDA cores:	896
Koeltechniek:	GIGABYTE WINDFORCE 2X