General Electric AEQ06 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor General Electric AEQ06 (48 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
Safety Instructions . . . . . . . . . . . . .2, 3
Operating Instructions
Control Knob Models . . . . . . . . . . .6, 7
Touch Pad Models . . . . . . . . . . . . . .4, 5
Care and Cleaning
Air Filter . . . . . . . . . . . . . . . . . . . . . . . .7
Outdoor Coils . . . . . . . . . . . . . . . . . . .7
Installation Instructions . . . . . . .8–11
Troubleshooting Tips . . . . . . . . . . .12
Normal Operating Sounds . . . . . . . .12
Consumer Support
Consumer Support . . . . . . .Back Cover
Ownership Registration for
Customers in Canada only . . . . .13, 14
Warranty for Customers
in Canada . . . . . . . . . . . . . . . . . . . . . .16
Warranty for Customers
in the U.S.A. . . . . . . . . . . . . . . . . . . . .15
49-7605 12-08 JR
AEM05*
AEM06*
AEM08*
AEQ05
AEQ06
AEQ08
AEV05
Owner’s Manual and
Installation Instructions
Write the model and serial numbers here:
Model # __________________________
Serial # __________________________
Find these numbers on a label on the
side of the air conditioner.
Air Conditioners
ge.com
Room
As an E SNERGY TAR ®partner, GE has
determined that this product meets
the E SNERGY TAR®guidelines for
energy efficiency.
*E SNERGY TAR ®labeled product
Climatiseur
Acondicionador
de aire
Manuel d’utilisation et
instructions d’installation
Manual del propietario
y instrucciones de
instalación
La section française commence à la page 17
La sección en español empieza en la página 33
In Canada, contact us at:
www.GEAppliances.ca
2
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injury.
â– Use this appliance only for its intended
purpose as described in this Owner’s
Manual.
â– This air conditioner must be properly
installed in accordance with the Installation
Instructions before it is used.
â– Never unplug your air conditioner by pulling
on the power cord. Always grip plug firmly
and pull straight out from the receptacle.
â– Replace immediately all electric service
cords that have become frayed or otherwise
damaged. A damaged power supply cord
must be replaced with a new power supply
cord obtained from the manufacturer and
not repaired. Do not use a cord that shows
cracks or abrasion damage along its length
or at either the plug or connector end.
â–  Turn the unit
OFF
and unplug your air
conditioner before making any repairs
or cleaning.
NOTE: We strongly recommend that any servicing
be performed by a qualified individual.
■For your safety…do not store or use
combustible materials, gasoline or other
flammable vapors or liquids in the vicinity
of this or any other appliance.
â–  All air conditioners contain refrigerants,
which under federal law must be removed
prior to product disposal. If you are getting
rid of an old product with refrigerants,
check with the company handling disposal
about what to do.
â–  If the receptacle does not match the plug,
the receptacle must be changed out by a
qualified electrician.
SAFETY PRECAUTIONS
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
For personal safety, this appliance must be
properly grounded.
DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall
outlet to minimize the possibility of electric
shock hazard from this appliance.
Power cord includes a current interrupter
device. A test and reset button is provided on
the plug case. The device should be tested on a
periodic basis by first pressing the
TEST
button
and then the
RESET
button while plugged into
the outlet. If the
TEST
button does not trip
or if the
RESET
button will not stay engaged,
discontinue use of the air conditioner and
contact a qualified service technician.
Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet
is properly grounded.
Where a 2-prong wall outlet is encountered,
it is your personal responsibility and obligation
to have it replaced with a properly grounded
3-prong wall outlet.
The air conditioner should always be plugged
into its own individual electrical outlet which
has a voltage rating that matches the rating
plate.
This provides the best performance and also
prevents overloading house wiring circuits
which could cause a fire hazard from
overheated wires.
See the Installation Instructions,
Electrical
Requirements
section for specific electrical
connection requirements.
HOW TO CONNECT ELECTRICITY
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Consumer Support
3
Consumer Support
Troubleshooting
Tips
Installation
Instructions
Care and Cleaning
Operating
Instructions
Safety Instructions
ge.com
WARNING!
Because of potential safety hazards under certain
conditions, we strongly recommend against the
use of an extension cord.
However, if you must use an extension cord,
it is absolutely necessary that it be a UL-listed,
14 gauge, 3-wire grounding type appliance
extension cord having a grounding type plug
and outlet and that the electrical rating of the
cord be 15 amperes (minimum) and 125 volts.
CAUTION:
DO NOT use an extension cord with any of the
230/208 volt models.
USE OF EXTENSION CORDS—115-Volt models only
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS


Product specificaties

Merk: General Electric
Categorie: Airco
Model: AEQ06

Heb je hulp nodig?

Als je hulp nodig hebt met General Electric AEQ06 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airco General Electric

Handleiding Airco

Nieuwste handleidingen voor Airco