Generac QT13068KVSCR Handleiding

Generac Niet gecategoriseerd QT13068KVSCR

Lees hieronder de 📖 handleiding in het Nederlandse voor Generac QT13068KVSCR (96 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/96

Cover198 Rev. C 07/12 Part No. 0J0216



SECTION PAGE

INTRODUCTION .................................................................... 1-1

SAFETY RULES ....................................................................1-2

IDENTIFICATION RECORD ....................................................2-1

EQUIPMENT DESCRIPTION ..................................................3-1

Equipment Description ..........................................................3-1

Engine Oil Recommendations ................................................3-1

Coolant Recommendations ...................................................3-1

ENGINE PROTECTIVE DEVICES ............................................4-1

Engine Protective Devices .....................................................4-1

FUEL SYSTEMS ...................................................................5-1

SPECIFICATIONS ..................................................................6-1

GENERAL INFORMATION .....................................................7-1

Alternator AC Lead Connections ............................................7-1

Alternator Power Winding Connections ..................................7-1

CONTROL PANEL .................................................................8-1

Control Panel Interface ..........................................................8-1

Activate the Generator ...........................................................8-1

Display Interface Menus ........................................................8-1

Setting the Exercise Timer .....................................................8-3

User Adjustable Settings .......................................................8-3

Fuel Conversion ....................................................................8-3

Operation .............................................................................. 8-3

Auto Start .............................................................................8-4

Manual Start .........................................................................8-4

Alarm and Warning Messages ...............................................8-4

Common Alarm Relay ...........................................................8-6

Maintenance Alerts ............................................................... 8-6

Menu System ........................................................................8-7

OPERATION .......................................................................... 9-1

Stationary Emergency Generator Control and Operation ......... 9-1

Operating Unit with Manual Transfer Switch ...........................9-1

Operating Unit with Automatic Transfer Switch ......................9-1

MAINTENANCE ................................................................... 10-1

Maintenance Performed by Authorized Service Dealers .......10-1

Cooling System...................................................................10-1

Checking Fluid Levels ..........................................................10-1

Maintenance Owner/Operator Can Perform .......................... 10-2

Miscellaneous Maintenance ................................................ 10-3

SERVICE SCHEDULE ..........................................................11-1

TROUBLESHOOTING ..........................................................12-1

Troubleshooting Guide .........................................................12-1

EMISSIONS WARRANTY .................................................... 13-1

NOTES

EXPLODED VIEWS & PARTS LISTS

WIRING DIAGRAMS & SCHEMATICS

Content050 Rev. A 10/10

Table of Contents

INTRODUCTION

Thank you for purchasing this model of the stationary emergency

generator product line.

Every effort was expended to make sure that the information and

instructions in this manual were both accurate and current at the

time the manual was written. However, the manufacturer reserves

the right to change, alter or otherwise improve this product(s) at

any time without prior notice.

READ THIS MANUAL THOROUGHLY

If any portion of this manual is not understood, contact the nearest

Service Dealer for starting, operating and servicing procedures.

Throughout this publication, and on tags and decals affixed to the

generator, DANGER, WARNING, CAUTION and NOTE blocks are

used to alert personnel to special instructions about a particular

service or operation that may be hazardous if performed incor-

rectly or carelessly. Observe them carefully. Their definitions are

as follows:

INDICATES A HAZARDOUS SITUATION OR ACTION WHICH, IF

NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.

Indicates a hazardous situation or action which, if not

avoided, could result in death or serious injury.

Indicates a hazardous situation or action which, if not

avoided, could result in minor or moderate injury.

NOTE:

Notes contain additional information important to a procedure

and will be found within the regular text body of this manual.

These safety warnings cannot eliminate the hazards that they

indicate. Common sense and strict compliance with the special

instructions while performing the service are essential to prevent-

ing accidents.

Four commonly used safety symbols accompany the DANGER,

WARNING and CAUTION blocks. The type of information each

indicates is as follows:

n This symbol points out important safety information that,

if not followed, could endanger personal safety and/or

property of others.



This symbol points out potential explosion hazard.

This symbol points out potential fire hazard.

This symbol points out potential electrical shock hazard.

The operator is responsible for proper and safe use of the equip-

ment. The manufacturer strongly recommends that the operator

read this Owner's Manual and thoroughly understand all instruc-

tions before using this equipment. The manufacturer also strongly

recommends instructing other users to properly start and operate

the unit. This prepares them if they need to operate the equipment

in an emergency.

For safety reasons, the manufacturer recommends that this

equipment be installed, serviced and repaired by a Service

Dealer or other competent, qualified electrician or installation

technician who is familiar with applicable codes, standards and

regulations. The operator also must comply with all such codes,

standards and regulations.

OPERATION AND MAINTENANCE

It is the operator's responsibility to perform all safety checks, to

make sure that all maintenance for safe operation is performed

promptly, and to have the equipment checked periodically by a

Service Dealer. Normal maintenance service and replacement of

parts are the responsibility of the owner/operator and, as such,

are not considered defects in materials or workmanship within the

terms of the warranty. Individual operating habits and usage con-

tribute to the need for maintenance service.

Proper maintenance and care of the generator ensure a minimum

number of problems and keep operating expenses at a minimum.

See a Service Dealer for service aids and accessories.

Operating instructions presented in this manual assume that the

generator electric system has been installed by a Service Dealer or

other competent, qualified contractor. Installation of this equipment

is not a “do-it-yourself” project.

HOW TO OBTAIN SERVICE

When the generator requires servicing or repairs, simply contact

a Service Dealer for assistance. Service technicians are factory-

trained and are capable of handling all service needs.

When contacting a dealer about parts and service, always supply

the complete Model Number, Serial Number and Type Code (where

applicable) from the DATA LABEL that is affixed to the unit.

1-1

Safety004 Rev. F 05/10

Safety Instructions

n SAVE THESE INSTRUCTIONS – The manufacturer suggests that these rules for safe operation be copied and posted in potential

hazard areas. Safety should be stressed to all operators, potential operators, and service and repair technicians for this

equipment.

Product specificaties

Merk:	Generac
Categorie:	Niet gecategoriseerd
Model:	QT13068KVSCR

Heb je hulp nodig?

Als je hulp nodig hebt met Generac QT13068KVSCR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Generac

Generac 6852 Handleiding

27 Augustus 2024

Generac CW20 Handleiding

26 Augustus 2024

Generac XC3000P Handleiding

26 Augustus 2024

Generac RG03624KNSX Handleiding

30 Juni 2023

Generac QT04554JNNNA Handleiding

25 Juni 2023

Generac QT10068AVAYA Handleiding

23 Juni 2023

Generac QT03542ANANR Handleiding

21 Juni 2023

Generac QT07068GNAX Handleiding

21 Juni 2023

Generac QT15068JVAC Handleiding

21 Juni 2023

Generac QT13068GVSYA Handleiding

20 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024