GE JXHC1 Handleiding

GE Fornuis JXHC1

Lees hieronder de đź“– handleiding in het Nederlandse voor GE JXHC1 (2 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Installation
Instructions
WARNING Use in unapproved appliance may
result in risk of fire or electric shock. This range
hood cord connection kit should be used only
with GE Appliances series range hood models
AV447, CVW9, JN327, JV338, JV247, JV248,
JV347, JV348, JV367, JV566, JV565, JV535, JV536,
JV635, JV636, JV665, JV666, JVE40 JVX3240,
JVX3300, JVX5300, JVX5360, JVX5305, JVX5365,
PVX7300, PVX7360, RN328, UVC7, UVC9, UVW8,
UVW9, ZVW13 and ZVW14.
BEFORE YOU BEGIN
Read these instructions carefully and completely.
• IMPORTANT — Save these instructions
for local inspector’s use.
• IMPORTANT — Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill Level – Installation of this power cord kit
requires basic mechanical skills. Proper installation
is the responsibility of the installer. Product failure
due to improper installation in not covered under
the GE Appliances Warranty.
WARNING Improper grounding can result
in a risk of electric shock. The appliance must be
grounded. The plug must be plugged into an outlet
that is properly installed and grounded. Consult a
qualified electrician if the grounding instructions are
not completely understood, or if doubt exists as to
whether the appliance is properly grounded. Do not
use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet
near the appliance.
Range Hood
Power Cord Kit
JXHC1
TOOLS NEEDED
PARTS INCLUDED
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This appliance is equipped with
a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
READ AND SAVE THESE INSTRUCTIONS
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
31-2000897 Rev. 0 02-21 GEA
Flat blade and
Phillips head screwdrivers
1/4" NutdriverWire cutters/
strippers
PART QUANTITY
Power Cord with Strain Relief 1
Wire Nuts 3
Installation Instructions 1
231-2000897 Rev. 0
Installation Instructions
1 REMOVE CONNECTION BOX
COVER
Locate the hood connection box and remove its cover.
5 CONNECT THE CORD WIRES
Inspect the junction box wires to determine the type of
connections that should be made.
For hoods with a ground screw:
A Connect the green ground wire to the green
ground screw.
B Using the wire nuts provided, connect the black
power cord lead to the stripped black lead and the
white power cord lead to the stripped white lead in
the connection box.
C All electrical connections should be inspected
carefully before replacing the connection box
cover.
For hoods with a ground wire:
A Using the (2) wire nuts provided, connect the
black power cord lead to the black junction box
lead. Connect the white power cord lead to the
white junction box lead.
B Locate the power cord green ground wire, and cut
off the ring terminal and strip 1/2” of insulation.
C Using the third wire nut, connect the power cord
ground wire to the green junction box lead.
D All electrical connections should be inspected
carefully before replacing the junction box cover.
2 REMOVE KNOCKOUT
Insert the blade of a flat blade screwdriver into the
preferred knockout slot and bend until the knockout
is removed.
3 THREAD WIRES THROUGH THE
KNOCKOUT
Thread the cord wires through the knockout hole.
6 REPLACE CONNECTION BOX
COVER
Replace the connection box cover using the screws
removed in Step 1.
7 INSTALL HOOD
Return to and proceed with the Installation Instructions
to install the range hood.
4 PULL CORD THROUGH THE
KNOCKOUT
From inside of the hood junction box, thread wires
through the strain relief nut and tighten down nut
until secure.
Printed in China

Product specificaties

Merk: GE
Categorie: Fornuis
Model: JXHC1

Heb je hulp nodig?

Als je hulp nodig hebt met GE JXHC1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis GE

GE

GE JB750EFES Handleiding

30 November 2024
GE

GE PC2S930YPFS Handleiding

15 Augustus 2024
GE

GE GRF40HSVSS Handleiding

16 April 2024
GE

GE GGF600AVFS Handleiding

16 April 2024
GE

GE CEP90302TSS Handleiding

19 Maart 2024
GE

GE CHP90301TBB Handleiding

19 Maart 2024
GE

GE PCGS960YPFS Handleiding

19 Maart 2024
GE

GE CHP90362TSS Handleiding

19 Maart 2024
GE

GE CHP90361TBB Handleiding

19 Maart 2024
GE

GE GGF600AVWW Handleiding

16 Maart 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

Whirlpool

Whirlpool TGML 660 NB Handleiding

3 December 2024
Whirlpool

Whirlpool WB S0060 NE Handleiding

3 December 2024
Whirlpool

Whirlpool WS68M8CCW Handleiding

3 December 2024
Whirlpool

Whirlpool WS68V8KCW Handleiding

3 December 2024
Whirlpool

Whirlpool GOWL 928/NB Handleiding

3 December 2024
Whirlpool

Whirlpool WS68G8ACXT/E Handleiding

3 December 2024
Whirlpool

Whirlpool WSQ1160NE Handleiding

3 December 2024
Whirlpool

Whirlpool OMR58CU1B Handleiding

3 December 2024
Whirlpool

Whirlpool WBB3760BF Handleiding

3 December 2024
Whirlpool

Whirlpool GOR 625/NB Handleiding

3 December 2024