GE JXFILLR1DD Handleiding

GE Fornuis JXFILLR1DD

Lees hieronder de 📖 handleiding in het Nederlandse voor GE JXFILLR1DD (2 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Installation
Instructions Range Trim Kit
JXFILLR1BB, JXFILLR1SS, JXFILLR1DD
INSTALLATION INSTRUCTIONS
If your range is to be installed against a wall, only
parts 1 and 2 are recommended.
If your range is to be installed in an island
configuration, parts 1,2, and 3 are recommended.
Parts 4 and 5 can be used in place of parts 1 and 2,
but modifications may need to be completed by the
customer for an ideal fit.
1. In order to securely install the trim kit, countertop
surfaces around the range must be clean and dry.
2. Adjust the range height so that the top of the
cooktop is 3/8” higher than the countertop and
level. See range installation instructions on how to
adjust unit height.
PARTS INCLUDED
SIDE TRIM REFERENCE GEOMETRY
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
31-11118 07-17 GEA
Left Side Trim (1)
Longer Left Side Trim (4)
Front of Side Trims Back of Side Trim Piece
Longer Right Side Trim (5)
*Unless part 4 & 5 are needed, which may have to be cut to size
Optional Trim Parts
No tools required*
Rear Trim (3)
Right Side Trim (2)
Angled Front Surface
Flat Surface Against Range
Cooktop
Countertop
3/8”
231-11118
Installation Instructions
3. Before removing the adhesive backing, dry fit the
trim pieces against the range. The angled front
surface should be in the front for parts 1 and 2.
■ For wall installed ranges, the front edge of the
side trims should line up with the front edge of
the cooktop.
■ For an island installation, center part 3 (has two
angled ends) along the back edge of the range
so that parts 1 and 2 are flush with part 3 for a
continuous appearance.
4. If trim pieces 4 and 5 are used for either wall
installation or island installation, ensure trim starts
at the front edge of the countertop. Trim length
modifications can be made by removing material
from the back end of the trim piece.
5. After determining the location of the trim pieces,
remove the adhesive backing and carefully place
the trim pieces in their previous location. Press
the trim pieces firmly down onto the countertop to
adhere the double sided tape.
FINAL ASSEMBLY REFERENCE
Installation against a wall:
Installation in an island:
Flush appearance
Modify back end of part
4 and 5 in this area
Edge of cooktop
1
1
2
2
3


Product specificaties

Merk: GE
Categorie: Fornuis
Model: JXFILLR1DD

Heb je hulp nodig?

Als je hulp nodig hebt met GE JXFILLR1DD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis GE

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis