GE JBP82SHSS Handleiding

GE Fornuis JBP82SHSS

Lees hieronder de πŸ“– handleiding in het Nederlandse voor GE JBP82SHSS (12 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
1
229C4053P545-5
31-10556-5 06-04 JR
EER3000, EER3001, JBP24, JBP25, JBP26, JBP35, JBP48, JBP64, JBP66, JBP67, JBP68, JBP69,
JBP71, JBP78, JBP80, JBP82, JBP83, JBP84, JBP99, JB600, JB710, JB905, JB968, JB988, JBS55
Installation
Free-Standing
Instructions Electric Ranges
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
β€’IMPORTANT β€” Save these
instructions for local inspector’s use.
β€’IMPORTANT β€” Observe all
governing codes and ordinances.
β€’ Note to Installer – Be sure to leave these
instructions with the Consumer.
β€’ Note to Consumer – Keep these
instructions for future reference.
β€’ Skill level – Installation of this appliance
requires basic mechanical skills.
β€’ Completion time – 1 to 3 hours
β€’ Proper installation is the responsibility of
the installer.
β€’ Product failure due to improper installation
is not covered under the Warranty.
WARNING β€”This appliance must
be properly grounded.
FOR YOUR SAFETY:
WARNING β€”Before beginning the
installation, switch power off at service panel
and lock the service disconnecting means to
prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
ANTI-TIP DEVICE
WARNING β€” To reduce the risk
of tipping, the appliance must be secured by
properly installed Anti-Tip bracket packed
with this appliance.
If the Anti-Tip device supplied with the range
does not fit this application, use the universal
Anti-Tip device WB2X7909.
WARNING β€”
β€’ All ranges can tip
β€’ Injury to persons could result
β€’ Install Anti-Tip bracket packed
with range
β€’ See Installation Instructions
If you pull the range out and away from the
wall for any reason, make sure the Anti-Tip
bracket is engaged when the range is pushed
back against the wall.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com
TOOLS YOU WILL NEED
FOR YOUR SAFETY:
All rough-in and spacing dimensions must be
met for safe use of your range. Electricity to
the range can be disconnected at the outlet
without moving the range if the outlet is in
the preferred location (remove lower drawer).
To reduce the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can
be reduced by installing a range hood that
sticks out at least 5” beyond the front of the
cabinets. Cabinets installed above a cooktop
must be no deeper than 13”.
Be sure your appliance is properly installed
and grounded by a qualified technician.
Make sure the cabinets and wall coverings
around the range can withstand the temperatures
(up to 200Β°F.) generated by the range.
2
Installation Instructions
PREPARE TO INSTALL THE RANGE
MATERIALS YOU MAY NEED
Anchor SleevesLag Bolts
(For Anti-Tip Bracket Mounted
on Concrete Floors Only)
3-Wire Cord
4β€˜ Long
4-Wire Cord OR
4β€˜ Long
(UL Approved 40 AMP)
Adjustable Wrench
Level1/4” Nut Driver
Phillips Screwdriver
Drill with 1/8” Bit
Pencil
Safety Glasses
Tape Measure
Pliers
Flat-blade
Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
1
Squeeze Connector
(For Conduit
Installations Only)
Tin Snips
3
Installation Instructions
PREPARE THE OPENING
See illustrations for all rough-in and spacing
dimensions.
The range may be placed with 0” clearance
(flush) at the back wall and side walls of
the cabinet.
NOTE: Use a 4β€²power cord to prevent
interference with the storage drawer.
Power cords 41 ⁄2to 6β€²long may have to be
dressed to allow for proper drawer closing.
MINIMUM DIMENSIONS BETWEEN COOKTOP,
WALLS AND ABOVE THE COOKTOP:
***Make sure the wall covering, countertop
and cabinets around the range can
withstand the heat (up to 200Β°F)
generated by the range.
*** Allow 30” minimum clearance between
surface units and bottom of unprotected
wood or metal cabinet, and 15” minimum
between countertop and adjacent cabinet
bottom.
*** Recommended spacing to heat-sensitive
surfaces.
2
21⁄2”
21⁄ ”2
71⁄ ”2
25”
36”
30”
Acceptable electrical
outlet area.
Orient the electrical
receptacle so the length
is parallel to the floor.
*0”
**15” Min.
**30” Min.
*0”
***6”
Min.


Product specificaties

Merk: GE
Categorie: Fornuis
Model: JBP82SHSS

Heb je hulp nodig?

Als je hulp nodig hebt met GE JBP82SHSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis GE

GE

GE EER3000HKC Handleiding

7 December 2024
GE

GE EER3000LBB Handleiding

7 December 2024
GE

GE EER2000MBB Handleiding

7 December 2024
GE

GE EER2002MBS Handleiding

7 December 2024
GE

GE EER3000HBB Handleiding

7 December 2024
GE

GE EER3000LKC Handleiding

7 December 2024
GE

GE EER3001HSS Handleiding

7 December 2024
GE

GE EER3000LTW Handleiding

7 December 2024
GE

GE EER3000HTW Handleiding

7 December 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis