Gamber-Johnson 7160-0880 Handleiding

Gamber-Johnson Cradle/docking station 7160-0880

Lees hieronder de 📖 handleiding in het Nederlandse voor Gamber-Johnson 7160-0880 (5 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.A

INST-777

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

1/5

INSTALLATION INSTRUCTIONS

Product

Revision

Form

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Printing Spec:

PS-001

GETAC- RX10H MEDICAL DOCK

7160-0880

This instruction sheet is for the RX10H docking station only. For instructions on

features, set-up, and operation of the RX10 computer, please refer to the manual

provided by Getac with the computer.

This docking station is designed to be used with a variety of Gamber-Johnson

mounting systems. Installation instructions for other Gamber-Johnson products

are provided with each individual product.

This instruction sheet is for the following products:

For Vehicle Mounting Applications (M4 X 0.7 Mounting Hardware):

Item No. 7160-0880-00 DOCK - GETAC - RX10H -No RF

Item No. 7160-0880-03 DOCK - GETAC - RX10H -Tri-RF

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify all

electronic and software issues are resolved prior to installation:

Make sure the computer is operational by itself.

Insert computer into the docking station and verify that the computer is

operating in the dock.

Interconnect entire assembly and verify start-up of all components,

including other equipment (printers, modems, scanners, etc.)

Gamber-Johnson recommends positioning of all mounts and equipment in the

vehicle prior to the actual install to verify that mounting locations are safe and

practical.

PRE-INSTALLATION RECOMMENDATOINS

During Installation:

DO NOT

connect this docking station to the vehicle battery until:

All other electrical connections are made

Mounting of all components is complete

Verification that no shorts exist in the entire system

DO NOT

install equipment or route wiring or cords in the deployment path of any air bag.

When drilling into the vehicle, DO make sure that both sides of the surface are clear of

anything that could be damaged.

CAUTION:

If wiring is shorted to the frame, high current conductors can cause hazardous

sparks resulting in electrical fires or flying molten metal.

After installation:

Test the docking station to ensure that it is working properly.

File these instructions in a safe place and refer to them when performing maintenance or re-

installing.

WARNING

: Failure to follow all safety precautions and instructions may result in property

damage, serious injury, or death.

Safety is dependent on the proper installation and servicing of this docking station. It is

important to read and follow all instructions before installing this product.

To properly install a Gamber-Johnson docking station you must have a good understanding of

automotive electrical procedures and systems, along with proficiency in the installation and

service of aftermarket vehicle equipment.

There are no adjustments required at any time of the electrical components within the

docking station.

Opening the docking station will void the product warranty.

IMPORTANT SAFETY INFORMATION FOR INSTALLERS

2/5

Thumb Knob

Latch

Lock

Through Holes

for mounting to

a wall

Guide Pins

Docking Connector

Triangle Alignment Mark

TRI-RF

Connector

GPS

WLAN

WWLAN

VGA PORT

Ethernet

19 Vdc Input

(1) USB 3.0

HDMI

(3) USB 2.0

Part#/Serial #

Label

Vesa 75mm Hole Pattern

M4 X 0.7 Threaded Inserts

Warranty Label

Port Identification Label

Cable Restraint Bracket

RX10H DOCKING STATION FEATURE IDENTIFICATON

3/5

Product specificaties

Merk:	Gamber-Johnson
Categorie:	Cradle/docking station
Model:	7160-0880
Kleur van het product:	Zwart
Breedte:	285 mm
Diepte:	92 mm
Hoogte:	284 mm
Ethernet LAN:	Ja
Type stroombron:	DC
Aantal USB 2.0-poorten:	3
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Materiaal:	Composite, Steel
HDMI:	Ja
Merkcompatibiliteit:	Getac
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Compatibiliteit:	RX10H
Dockingconnector soort:	Samsung Pogo Connector
Standaard apparaat type:	Tablet