Frigidaire FRA082AT7 Handleiding

Frigidaire Airco FRA082AT7

Lees hieronder de 📖 handleiding in het Nederlandse voor Frigidaire FRA082AT7 (8 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
TA B L E O F C O N T E N T S
www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352
All about the
Use&Care
of your
Room Air Conditioner
Care and Cleaning .............................................. 6
Energy Saving Ideas ........................................... 6
Before You Call ................................................... 7
Major Appliance Warranty ................................... 8
2020217A1466 (June 2009)
Product Registration
...........................................................
3
Packaging 3
Normal Sounds .................................................... 3
.............................................
Operating Instructions 4-5..........................................
Important Safety Instructions ............................... 2
Important Safety Instructions
READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.
Unit must be upright for one hour prior to operating.
Plug in &
press RESET
The power supply cord contains a current device that senses damage to the power cord. To test
your power supply cord do the following:
Plug in the Air Conditioner.
The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
Press the RESET button. Again you will notice a click as the button engages.
The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
Grounding type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass the
grounding prong.
Power supply cord
with 3-prong grounding
plug and current
detection device
WARNING
For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. Read product labels for flammability and other warnings.
WARNING
Prevent Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner,
follow basic precautions, including the following:
Be sure the electrical service is adequate for the model you have chosen. This information
can be found on the serial plate, which is located on the side of the cabinet and behind the
grille.
If the air conditioner is to be installed in a window, you will probably want to clean both
sides of the glass first. If the window is a triple-track type with a screen panel included,
remove the screen completely before installation.
Be sure the air conditioner has been securely and correctly installed according to the
separate installation instructions provided with this manual. Save this manual and the
installation instructions for possible future use in removing or reinstalling this unit.
When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front
and rear coils.
The complete electrical rating of your new room air conditioner is stated on the serial plate.
Refer to the rating when checking the electrical requirements.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards,
proper grounding is important. The power cord is equipped with a three-prong grounding
plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall
receptacle you intend to use is not adequately grounded or protected by a time delay fuse
or circuit breaker, have a qualified electrician install the proper receptacle.
Do not run air conditioner without outside protective cover in place. This could result in
mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
WARNING
Electrical Information
WARNING
Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug. Do
not remove any prong from the power cord.
NOTE:
The power supply cord with
this air conditioner contains a current
detection device designed to reduce the risk
of fire.
Please refer to the section ‘Operation of
Current Device’ for details.
In the event that the power supply cord is
damaged, it cannot be repaired. It must be
replaced with a cord from the product
manufacturer.
NOTE:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed,
or it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained
from the product manufacturer.
22009 Electrolux Home Products, Inc. All rights reserved.
NOTE:
This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as
instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that
may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.
Record Your Model and Serial Numbers
Record in the space provided below the model and serial numbers. On all models, the
serial plate is located on the outside of the cabinet.
Model No.
Serial No.
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to the Frigidaire Company.
Packaging
Normal Sounds
Remove all packaging from inside the carton, along with any
inserts placed into the side louvers.
PACKAGING INSERTS
Today’s high efficiency compressors
may have a high pitched chatter
during the cooling cycle.
High pitched Chatter
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Vibration
Pinging or Swishing
Droplets of water hitting condenser
during normal operation may cause
“pinging or swishing” sounds.
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan.
Gurgle/Hiss
“Gurgling or hissing” noise may be heard
due to refrigerant passing through
evaporator during normal operation.
Product Registration
Product Registration, Packaging & Normal Sounds
3
2009 Electrolux Home Products, Inc. All rights reserved.

Product specificaties

Merk: Frigidaire
Categorie: Airco
Model: FRA082AT7

Heb je hulp nodig?

Als je hulp nodig hebt met Frigidaire FRA082AT7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Airco Frigidaire

Frigidaire

Frigidaire FHWH184WB2 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW125WE1 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW105WE1 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWH234WB2 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW085WE1 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW185WE2 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW184WE2 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW145WE1 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWW245WE2 Handleiding

24 Maart 2024
Frigidaire

Frigidaire FHWC064TE1 Handleiding

23 Februari 2024

Handleiding Airco

Nieuwste handleidingen voor Airco

Whirlpool

Whirlpool WHAT121-1BW Handleiding

11 December 2024
Fujitsu

Fujitsu AUXB009HLAH Handleiding

10 December 2024
Haier

Haier KFR-35GW/11WEA22AU1 Handleiding

10 December 2024
Haier

Haier KFR-32GW/11WEA22AU1 Handleiding

10 December 2024
Haier

Haier KFR-35GW/05KBP22A(DS) Handleiding

10 December 2024
HTW

HTW S071IX21D4-R32 Handleiding

10 December 2024
HTW

HTW -AC9-1800SA2 Handleiding

10 December 2024
IFB

IFB HI1831G223GM2 Handleiding

10 December 2024
IFB

IFB CI223SS32SGN1 Handleiding

10 December 2024
IFB

IFB CI223SS32RGN1 Handleiding

10 December 2024