Frigidaire FFEF3043LS Handleiding

Frigidaire Fornuis FFEF3043LS

Lees hieronder de 📖 handleiding in het Nederlandse voor Frigidaire FFEF3043LS (24 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
TA B L E O F C O N T E N T S
808527503 Rev. B (June 2016)
Important Safety Instructions 3-5
...........................
Before Setting Oven Controls 6
..............................
Before Setting Surface Controls 7-8
........................
Setting Surface Controls (Ceramic cooktop) 9-11
.....
Oven Control Functions (100) 12
............................
Setting Oven Controls 12-15
..................................
Care & Cleaning 16-19
..........................................
Before You Call 20-21
...........................................
Major Appliance Warranty back cover
.....................
2
Thank you for choosing .Frigidaire
This Use & Care Guide is part of our commitment to
customer satisfaction and product quality throughout the
service life of your new appliance. We view your purchase
as the beginning of a relationship. To ensure our ability
to continue serving you, please use this page to record
important product information.
Need help??
Visit the Frigidaire web site at www.frigidaire.com
Before you call for service, there are a few things you can
do to help us serve your better.
Read this Use & Care manual.
It contains instructions to help you use and maintain your
range properly.
If you received a damaged range ...
immediately contact the dealer (or builder) that sold you
the range.
Save time and money.
Check the section titled “Before you call”. This section
helps step you through some common problems that
might occur. If you do need service, help is only a phone
call away. Call Frigidaire Customer Services at 1-800-
944-9044.
Product Registration
Registering your product with Frigidaire enhances our
ability to serve you. You can register online at www.
frigidaire.com or by dropping your Product Registration
Card in the mail.
Serial plate location
©2016 Electrolux Home Products, Inc. All rights reserved. Printed in the USA
PRODUCT RECORD AND REGISTRATION
Contents
Product Registration 2
......................................................
Important Safety Instructions 3-5 ............................
Before Setting Oven Controls 6
..................................
Removing, replacing & arranging the oven racks 6
..........
Before Setting Surface Controls 7-8 ...........................
About the ceramic cooktop & radiant elements 7
.............
Cookware material types .............................................
8
Setting Surface Controls 9-11 ....................................
Setting single radiant surface elements 9
........................
Setting dual radiant surface elements 10
........................
Home canning 11
.........................................................
Oven Control Functions 12
.........................................
Setting Oven Controls 12-15 ......................................
Setting the clock 12
......................................................
Changing oven temperature display (F° or C°) 12
...........
Setting minute timer 13
.................................................
Setting bake ............................................................
13
Setting broil 14
.............................................................
Adjusting oven temperature 15
......................................
Operating oven light 15
.................................................
Care & Cleaning ................................................
16-19
Cleaning recommendation table 16
................................
Cooktop maintenance & cleaning.......................... 17-18
Cautions for aluminum use 18
.......................................
Replacing the oven light 18
...........................................
Removing & replacing oven door 19
...............................
Before You Call
Solutions to common problems 20-21
............................
Appliance Warranty Back Cover
.................................
Purchase date
Model number
Serial number
Record model & serial numbers here
Be sure to visit us online at
www.frigidaire.com
for a complete line of accessories.
Serial plate location:
open storage drawer (some models) or
remove lower front panel (some models).
3
Read all instructions before using this appliance.
Do not attempt to install or operate your appliance until
you have read the safety precautions in this manual.
Safety items throughout this manual are labeled with a
WARNING or CAUTION statement based on the risk type.
Denitions
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety mes-
sages that follow this symbol to avoid possible injury or
death.
Save these instructions for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Ask your dealer to recommend a qualied technician and
an authorized repair service. Know how to disconnect the
power to the range at the circuit breaker or fuse box in
case of an emergency.
• Remove the oven door from any unused range if
it is to be stored or discarded.
Remove all tape and packaging before using
the range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
Proper installation—Be sure your appliance is
properly installed and grounded by a qualied
technician in accordance with the National
Electrical Code ANSI/NFPA No. 70 latest edition
and local electrical code requirements. Install only
per installation instructions provided in the literature
package for this range.
User servicing—Do not repair or replace any part
of the appliance unless specically recommended
in the manuals. All other servicing should be done
only by a qualied technician. This may reduce the risk
of personal injury and damage to the range.
Never modify or alter the construction of a range
by removing the leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other
part of the range.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, may result in
death or serious injury.
WARNING
Stepping, leaning or sitting on the door or
drawers of a range can result in serious injuries
and also cause damage to the appliance. DO NOT
allow children to climb or play around the range. The
weight of a child on an open oven door may cause the
range to tip, resulting in serious burns or other injury.
Never use your appliance for warming or heating
the room.
Do not use the oven, warmer drawer or lower
oven for storage.(if equipped)
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation, maintenance
or valuable information that is not hazard related.
WARNING
Tip Over Hazard
A child or adult can tip the
range and be killed.
Verify the anti-tip device has
been installed to oor or wall.
Ensure the anti-tip device is re-engaged when
the range is moved to oor or wall.
Do not operate the range without the anti-tip
device in place and engaged.
Failure to follow these instructions can result in
death or serious burns to children and adults.
Range
leveling leg Anti-Tip
bracket
To check if the anti-tip bracket is installed properly,
use both arms and grasp the rear edge of range back.
Carefully attempt to tilt range forward. When properly
installed, the range should not tilt forward.
Refer to the anti-tip bracket installation instructions
supplied with your range for proper installation.
5
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
Know which knob controls each surface heating
unit. Place a pan of food on the unit before turning it
on, and turn the unit off before removing the pan.
Use proper pan sizeThis appliance is equipped
with one or more surface units of different sizes. Select
utensils having at bottoms large enough to cover the
surface unit heating element. The use of undersized
utensils will expose a portion of the heating element
to direct contact and may result in ignition of clothing.
Proper relationship of utensil to element will also
improve efciency.
Utensil handles should be turned inward and not
extend over adjacent surface elementsTo reduce
the risk of burns, ignition of ammable materials, and
spillage due to unintentional contact with the utensil,
the handle of the utensil should be positioned so that
it is turned inward, and does not extend over adjacent
surface units.
Never leave surface elements unattended at high
heat settings—Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.
Do not immerse or soak removable heating
elementsHeating elements should never be
immersed in water. Heating elements clean themselves
during normal operation.
Glazed cooking utensils—Only certain types of
glass, glass/ceramic, ceramic, earthenware, or other
glazed utensils are suitable for cook top service without
breaking due to the sudden change in temperature.
Check the manufacturer’s recommendations for cook top
use.
When aming foods under a ventilating hood,
turn the fan on.
FOR CERAMIC-GLASS COOK TOP MODELS
Do not cook on broken cook top—If cook top should
break, cleaning solutions and spillovers may penetrate
the broken cook top and create a risk of electric shock.
Contact a qualied technician immediately.
Clean cook top with cautionIf a wet sponge or
cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can
produce noxious fumes if applied to a hot surface.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
Clean the range regularly to keep all parts free of
grease that could catch re. Pay particular attention
to the area around each surface element. Do not allow
grease to accumulate.
Kitchen cleaners and aerosols—Always follow the
manufacturer’s recommended directions for use.
Be aware that excess residue from cleaners and aerosols
may ignite causing damage and injury.
Clean ventilating hoods frequently—Grease
should not be allowed to accumulate on the hood
or lter. Follow the manufacturer’s instructions for
cleaning hoods.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a
list of substances known to the state to cause cancer,
birth defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to
such substances.
6
Types of oven racks
Your range may be equipped with one or more of the oven
rack styles shown.
BEFORE SETTING OVEN CONTROLS
Oven vent location
The oven vent is located under the left side of the
control panel (See Fig. 1). When the oven is on, warm
air passes through this vent. This venting is necessary for
proper air circulation in the oven and good baking results.
Do not block the oven vent.
Fig. 1
at
oven rack
at handle
oven rack
offset
oven rack
The or (some at oven rack at handle oven rack
models) may be used for most cooking needs.
The (some models) is designed to place offset oven rack
the base of the rack about 1/2 of a rack position lower
than normal. This rack design provides several additional
possible locations between the standard positions.
Air circulation in the oven
For best baking results allow 2-4” (5-10 cm) around the
cookware for proper air circulation and be sure pans and
cookware do not touch each other, the oven door, sides or
back of the oven cavity. Hot air must be able to circulate
around the pans and cookware in the oven for even heat
to reach around the food.
oven vent location
Fig. 2
Removing, replacing & arranging racks
To remove - pull the rack forward until it stops. Lift up
front of rack and slide out.
To replace - t the rack onto the guides on the oven
walls. Tilt the front of the rack upward and slide the rack
back into place.
Arranging - always arrange the oven racks when the
oven is cool (prior to operating the oven).
CAUTION
Always use oven mitts when using the oven.
When using the appliance, oven racks and cooktop will
become very hot which can cause burns.
Recommended rack positions by food type
Food type Position
Broiling meats See broil
Cookies, cakes, pies, biscuits & mufns 2 or 3
Frozen pies, angel food cake, yeast, bread
and casseroles
1 or 2
Small cuts of meat or poultry 1 or 2
Turkey, roast or ham 1
7
BEFORE SETTING SURFACE CONTROLS
About the ceramic glass cooktop
The ceramic cooktop has radiant surface elements
located below the surface of the glass. The design of the
ceramic cooktop outlines the area of the surface element
underneath. to match the pan size with the Be sure
diameter of the element outline on the cooktop and only
at-bottomed cookware should be used.
The type and size of cookware, the number of surface
elements in use and their settings are all factors that will
affect the amount of heat that will spread to areas beyond
the surface elements. The areas surrounding the elements
may become hot enough to cause burns.
About the radiant surface elements
The element temperature rises gradually and evenly.
As the temperature rises, the element will glow red. To
maintain the selected setting the element will cycle ON
and OFF. The heating element retains enough heat to
provide a uniform and consistent heat during the off cycle.
For efcient cooking, turn OFF the element several
minutes before cooking is complete. This will allow residual
heat to complete the cooking process.
Element on & hot surface indicator lights
Your appliance is equipped with two different types of
radiant surface control indicator lights that will glow on
the control panel the indicator and the on hot surface
indicator lights.
The element indicator light will glow when any surface on
element is turned ON. A quick glance at this indicator
light after cooking is an easy check to be sure the surface
controls are turned OFF (See Fig. 1).
The indicator light will glow when any hot surface
surface cooking area heats up and will until remain on
the glass cooktop has cooled to a level (See MODERATE
Fig. 2).
hot surface indicator light
Fig. 1
Fig. 2
element ON indicator light
NOTES
Radiant elements have a limiter that allows the element
to cycle ON and OFF, even at the HI setting. This helps
to prevent damage to the ceramic smoothtop. Cycling at
the HI setting is normal and will occur more often if the
cookware is too small for the radiant element or if the
cookware bottom is not at.
Be sure to read the detailed instructions for ceramic
glass cooktop cleaning in the and Care & Cleaning
Before You Call checklist sections of this Use & Care
Manual.
9
SETTING SURFACE CONTROLS
Single radiant surface elements (all models)
To operate the single radiant element:
1. Place correctly sized cookware on single radiant
surface element.
2. Push in and turn the surface control knob in either
direction (Fig. 2) to the desired setting (Refer to the
Suggested radiant surface element settings
table Fig. 1). Start most cooking operations on a
higher setting and then turn to a lower setting to nish
cooking. The surface control knobs do not have to
be set exactly on a particular spot. Use the graphics
provided as a guide and adjust the control knob as
needed (See Fig. 2). Each surface element provides
a constant amount of heat at each setting. A glowing
red surface heating area extending beyond the bottom
edge of the cookware indicates the cookware is too
small for the surface heating area.
3. When cooking is complete, turn the radiant surface
element OFF before removing the cookware.
Suggested radiant surface element
settings
The suggested settings found in Fig.1 below are based
when cooking with medium-weight aluminum pans with
lids. Settings may vary when using other types of pans.
Fig. 2
Suggested settings for single and dual radiant
elements table
Settings Type of cooking
High (HI - 9) Start most foods, bring water to
a boil, pan broiling
Medium high (7 - 8) Continue a rapid boil, fry, deep
fat fry
Medium (5 - 6) Maintain a slow boil, thicken sauces
and gravies or steam vegetables
Medium Low (2 - 4) Keep foods cooking, poach, stew
Low (LO - 1) Keep warm, melt, simmer
Fig. 1
CAUTION
Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufciently.
Do not place ammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items
could melt or ignite. Potholders, towels or wooden
spoons could catch re if placed too close to the surface
elements.
IMPORTANT
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
NOTES
The size and type of utensil used, and the amount and
type of food being cooked will inuence the setting
needed for best cooking results.
The indicator light will glow when one or more on
elements are turned ON. A quick glance at this indicator
light when cooking is nished is an easy check to be
sure all control knobs are turned OFF. The hot surface
indicator light will continue to glow AFTER the control
knob is turned to the “OFF” position and will glow until
the heating surface area has cooled sufciently.
11
SETTING SURFACE CONTROLS
Home Canning
Be sure to read and observe all the following points when
home canning with your appliance. Check with the USDA
(United States Department of Agriculture) website and
be sure to read all the information they have available as
well as follow their recommendations for home canning
procedures.
Use only quality at bottom canners when home
canning. Use a straight-edge to check canner bottom
(see “Cookware material types” in the Before setting
surface controls section).
completely at bottom cannerUse only a with no
ridges that radiate from the bottom center when home
canning using a ceramic cooktop.
• Make sure the diameter of the canner does
not exceed 1 inch beyond the surface element
markings or burner. It is recommended to use smaller
diameter canners on electric coil and ceramic glass
cooktops.
Start with hot tap water to bring water to boil more
quickly.
Use the highest heat seating when rst bringing the
water to a boil. Once boiling is achieved, reduce heat to
lowest possible setting to maintain that boil.
CAUTION
Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufciently.
Do not place ammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items
could melt or ignite. Potholders, towels or wooden
spoons could catch re if placed too close to the surface
elements.
IMPORTANT
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
IMPORTANT
NEVER place or straddle a cooking utensil over 2
different surface cooking areas at the same time. This
may cause the ceramic cooktop to fracture.
12
OVEN CONTROL FUNCTIONS
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Up and down
arrow pads— Use
with the feature or
function pads to set
oven temperature or
adjusting the clock
and minute timer.
Broil pad— Use to select
the variable broil feature.
Bake pad—Use to select
the bake feature.
Feature indicator
lights— These indicator
lights show if bake or broil
is active.
Clock pad— Use to
set the time of day.
Clear off pad— Use to clear any feature
previously entered except the time of day and
minute timer. Press to stop cooking.clear off
Timer on-off pad— Use to set or cancel the
minute timer. The minute timer does not start
or stop cooking.
Setting the clock
When the appliance is rst plugged in or when the
power supply to the appliance has been interrupted, the
display will ash “12:00”. It is recommended to always
set the clock for the correct time of day before using the
appliance.
To set the clock:
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the until or
the correct time of day appears in the display.
Changing the temperature display mode
(°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The display may be
changed to show either Fahrenheit or Celsius oven
temperatures.
To change the temperature display mode from °F
to °C (Celsius) or from °C to °F (Fahrenheit).
1. Press and hold (for 6-8 seconds) until F or C broil
appears in the display. At this time the display will
show the current temperature display mode whether
set for F or C. Before proceeding read the notes below.
2. Press either or key pad to toggle between F
(Fahrenheit) or (Celsius) mode choices.C
SETTING OVEN CONTROLS
NOTES
If at any time during the process of changing the
temperature display mode you decide not to change
the mode, press the key pad once before clear off
the acceptance beep.
The temperature display mode cannot be changed
when or is active.bake broil
3. To accept the change, wait until the oven control
provides the acceptance beep (See below).Notes
4. The display will return to the time of day with the
temperature display mode changed the next time the
oven is set for bake or broil.
13
SETTING OVEN CONTROLS
Setting the minute timer
1. Press timer on-off.
2. Press the to increase the time in one minute
increments. Press and hold the to increase the time
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours and 59
minutes.
If the Note: pad is pressed rst, the timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will sound
a 3 second tone . 0:00 will show in the display until
timer on-off is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press
and hold the to increase or decrease the time or
remaining.
To cancel the minute timer before the set time has
run out
Press once .timer on-off
Setting bake
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C). The factory preset
bake temperature is 350°F (177°C).
To set bake
1. Press bake. “— — —” appears in the display.
2. Within 5 seconds, press the . The display will or
show “350°F (177°C).” By pressing and holding the
or , the temperature can then be adjusted in 5°F
increments (1°C if the control is set to display Celsius).
3. As soon as the pad is released, the oven will or
begin preheating to the selected temperature. When
the oven reaches the desired baking temperature, the
control will beep once.
To change the oven temperature after bake has
started
1. Press bake. Visually check the bake temperature and
that it needs to be changed.
2. Press the or pad to increase or decrease the set
temperature to the desired new oven temperature.
NOTES
The minute timer start or stop the cooking will not
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the
other oven features.
If another feature is active when the minute timer is
active, the minute timer will show in the display. To
view information about other active features, press
the pad for that feature.
IMPORTANT
Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for
cakes, cookies and mufns.
NOTES
To cancel baking at any time, press . clear off
14
SETTING OVEN CONTROLS
Setting broil
Use the broil feature to cook meats that require direct
exposure to radiant heat for optimum browning results.
When broiling always remember to arrange the oven racks
while oven is still cool.
For medium done steaks, position the oven rack closer to
the broil element (positions 4 or 5; Fig. 1). For well-done
foods such as chicken, sh, lobster or thick cuts of meat,
position the oven rack further from the broil element.
To set Broil
1. Arrange the oven rack while oven is still cool. Position
the oven rack as needed.
2. Press broil. “ ” will appear in display.— —
3. Press and hold the or until the desired broil
setting level appears in the display. Press the for
HI broil or the for broil. Most foods may be LO
broiled at the broil setting. Select the broil HI LO
setting to avoid excess browning or drying of foods
that should be cooked to the well-done stage.
4. For optimum results, preheat oven for 5
minutes before adding food.
5. Place the insert on the broil pan (some models; Fig.
2), then place the food on the broil pan insert.
6. Place the broiler pan and insert on the oven rack.
7. Open the oven door to the broil stop position when
broiling.
8. Broil on one side until food is browned. Turn and broil
food on 2nd side.
9. When broiling is nished press clear off.
Insert
Broil pan
Fig. 1 Fig. 2
WARNING
Should an oven re occur, close the oven door and
turn the oven OFF. If the re continues, use a re
extinguisher. DO NOT put water or our on the re.
Flour may be explosive.
CAUTION
The broiler pan and the insert (some models) allows
grease to drain and be kept away from the high
heat of the broiler. use the pan without the DO NOT
insert. cover the insert with DO NOT aluminum
foil; the exposed grease could ignite.
To insure proper results when broiling use ONLY
Electrolux Home Products, Inc. approved broil pan &
insert.
NOTES
Always pull the oven rack out to the stop position before
turning or removing the food.
15
SETTING OVEN CONTROLS
Adjusting oven temperature
Your appliance has been factory calibrated and tested
to ensure an accurate baking temperature. For the rst
few uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.
To adjust oven temperature
1. Press & hold the key pad and release after the bake
display shows the factory temperature setting of 00.
If the oven temperature has been previously adjusted
from the factory setting, the latest adjusted value will
appear in the display instead.
2. You may increase the oven temperature in 5°F
increments with each press of the key pad. You
may also adjust the oven temperature downward in
5°F increments with each press of the key pad
(total adjustment range is +35°F to -35° F).
3. To accept the change, wait until the oven control
provides the acceptance beep ( ).See Notes
4. The oven temperature adjustment has been accepted
by the oven control and the display will return to the
time of day.
Operating oven light (some models)
The interior oven light will automatically turn ON when the
oven door is opened. Press the oven light switch located
on the upper left control panel to turn the interior oven
light ON and OFF whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior. To change the interior oven light, see
“Changing the oven light” in the section.Care & cleaning
oven light switch
NOTES
If at any time during the process of adjusting the
oven temperature feature you decide not to make the
change, press the key pad once before the clear off
acceptance beep.
The oven temperature adjustment feature can not be
modied if bake broilor is active.
The oven temperature adjustment may be made
if your oven control has been set for °C (Celsius)
temperature display mode. In this case each press
of the or key pad will adjust in 1°C increments
upward (maximum +18°C) or downward (maximum
-18°C), depending on which arrow key pad is
pressed.
oven thermometers such as those DO NOT USE
found in grocery stores to check the temperature
settings inside your oven. These oven thermometers
may vary as much as 20 to 40 degrees from actual
temperatures.
16
CARE & CLEANING
Cleaning recommendation table
Surface type Recommendation
Control knobs
Painted body parts
Painted decorative trim
Aluminum, plastic or vinyl trim
pieces
For general cleaning, use hot, soapy water and a cloth. For more difcult
soils and built-up grease, apply a liquid detergent directly onto the soil.
Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry. use Do not
abrasive cleaners on any of these materials; they can scratch. To remove control
knobs, turn to the OFF position; grasp rmly and pull straight off the shaft. To
replace knobs after cleaning, line up the at sides of both the knob and the shaft;
then push the knob into place.
Control panel
Decorative trim (some models)
Before cleaning the control panel, turn all controls OFF and if needed remove
any knobs from the panel. Clean using hot, soapy water and a dishcloth. Be
sure squeeze excess water from the dishcloth before to wiping the control
panel; especially when wiping around the controls area. Excess water in or
around the controls may cause damage to the appliance. When rinsing, use clean
water and a dishcloth and be sure to squeeze excess water from dishcloth before
wiping the control panel.
Stainless Steel (some models) Clean heavier soils with hot, soapy water and a dishcloth. Rinse with clean water
and a cloth. Do not use cleaners with high concentrations of chlorides or
chlorine. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are
especially made for cleaning stainless steel. Always be sure to wipe the cleaners off
from the surface as bluish stains may occur during heating that cannot be removed.
Oven interior & door liner
Porcelain enamel broiler pan
and broiler pan insert (some
models)
Gentle scouring with a soapy non-abrasive scouring pad will remove most spots.
Rinse with a 1:1 solution of clear water and ammonia. cover If necessary,
difcult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse
with clean water and a damp cloth, and then scrub with a soap-lled non-abrasive
scouring pad. Rinse and wipe dry with a clean cloth. Do not allow food spills with
a high sugar or acid content (milk, tomatoes, sauerkraut, fruit juices or pie lling)
to remain on the surface; they may cause a dull spot even after cleaning.
The oven interior is porcelain coated and is safe to clean using oven cleaners
following manufacturer’s instructions. After cleaning, remove any oven cleaner or
the porcelain may become damaged during future heating. spray oven Do not
cleaner on any electrical controls or switches. spray or allow oven cleaner Do not
to build up on the oven temperature sensing bulb. spray cleaner on oven Do not
door trim, door gasket, plastic drawer glides, handles or any exterior surfaces of
the range.
Clean any soils from the oven frame, the door liner outside the oven door gasket
and the small area at the front center of the oven bottom. Clean with hot, soapy
water. Rinse using clean water and a cloth.
Oven racks Remove oven racks from oven before cleaning. Clean by using a mild,
abrasive cleaner following manufacturer’s instructions. Rinse with clean water and
dry.
Oven door Use soap & water to thoroughly clean the top, sides and front of the oven door.
Rinse well. You may use a glass cleaner on the outside glass of the oven door.
Do not immerse the door in water. Do not spray or allow water or the glass
cleaner to enter the door vents. Do not use oven cleaners, cleaning powders
or any harsh abrasive cleaning materials on the outside of the oven door.
Ceramic cooktop Do not use spray oven cleaners on the cooktop. See cooktop cleaning and
maintenance in the section.Care & Cleaning
17
For light to moderate soil:
Apply a few drops of cooktop cleaning cream directly
to the cooktop. Use a clean paper towel to clean the
entire cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue. Do not use the towel you
use to clean the cooktop for any other purpose.
For heavy, burned on soil:
Apply a few drops of glass-ceramic cooktop cleaner
directly to the soiled area. Rub the soiled area using a
non-abrasive plastic type no-scratch cleaning pad, applying
pressure as needed. Do not use the pad you use to clean
the cooktop for any other purpose.
If soils remain, carefully scrape soils with a metal razor
blade scraper, holding scraper at a 30 degree angle to
the surface. Remove loosened soils with cooktop cleaning
cream and buff surface clean.
Prior to using your cooktop for the rst time, apply
a ceramic cooktop cleaning cream (available in most
hardware, grocery and department stores) to the ceramic
surface. Clean and buff with a clean paper towel. This will
make cleaning easier when soiled from cooking. Cooktop
cleaning creams leave a protective nish on the glass to
help prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the
cooktop can cause metal markings on the cooktop surface.
These marks should be removed after the immediately
cooktop has cooled using the cooktop cleaning cream.
Metal marks can become permanent if not removed prior
to future use.
Cookware (cast iron, metal, ceramic or glass) with rough
or dirty bottoms can the cooktop mark or scratch
surface.
Do not:
Slide anything metal or glass across the cooktop.
Use cookware with dirt or dirt build up on bottom;
replace with clean cookware before using.
Use your cooktop as a cutting board or work surface in
the kitchen.
Cook foods directly on the cooktop surface without a
pan.
Drop heavy or hard objects on the ceramic glass
cooktop, they may cause it to crack.
Cooktop maintenance Cooktop cleaning
CARE & CLEANING
CAUTION
Before cleaning the cooktop, be sure the controls are
turned to OFF and the cooktop is COOL.
IMPORTANT
Consistent and proper cleaning is essential to
maintaining your ceramic glass cooktop.
18
CARE & CLEANING
Caution for aluminum use on the cooktop
Aluminum Foil - Use of aluminum foil on a hot
cooktop will damage the ceramic cooktop. Do not use
thin aluminum cooking utensils or allow aluminum foil to
touch the ceramic cooktop under ANY circumstances.
Aluminum utensils - The melting point of aluminum
is much lower than that of other metals. Care must be
taken when aluminum pots or pans are used on the
cooktop. If aluminum pans are allowed to boil dry when
using the cooktop, not only will the utensil be damaged
or destroyed, but it may fuse to, break or mark the
ceramic glass surface, permanently damaging the
cooktop surface.
Do not use the following on the cooktop:
Do not use abrasive cleaners and scouring pads, such
as metal and some nylon pads. They may scratch the
cooktop, making it more difcult to clean.
Do not use harsh cleaners, such as chlorine bleach,
ammonia or oven cleaners, as they may etch or discolor
the cooktop.
Do not use dirty sponges, cloths or paper towels, as
they can leave soil or lint on the cooktop which can
burn and cause discoloration.
Cooktop cleaning (cont’d)
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if
spilled or melted onto the ceramic cooktop surface.
Permanent damage (such as pitting of the cooktop
surface) may occur if not removed .immediately
After turning the surface elements OFF, use a razor blade
scraper or a metal spatula with a mitt and scrape the soil
from the hot surface (as illustrated). Allow the cooktop to
cool, and use the same method for heavy or burned on
soils.
Replacing oven light
The interior oven light bulb is located at the upper left rear
of the oven cavity.
To replace the oven light bulb
1. Turn electrical power off at the main source or unplug
the range.
2. Replace bulb with a new 40 watt appliance bulb.
3. Turn power back on again at the main source (or plug
the appliance back in).
4. The clock will then need to be reset. To reset, see
“Setting the clock” in this Use & Care Guide.
WARNING
DO NOT use a cooktop cleaner on a hot cooktop.
The fumes can be hazardous to your health and
can chemically damage the ceramic glass surface.
CAUTION
Be sure the range is unplugged and all parts are COOL
before replacing oven light. Wear a leather-faced glove for
protection against possible broken glass.
IMPORTANT
Damage to the ceramic glass cooktop may occur if you
use an abrasive type cleaning pad. Only use cleaning
products that have been specically designed for ceramic
glass cooktops.


Product specificaties

Merk: Frigidaire
Categorie: Fornuis
Model: FFEF3043LS

Heb je hulp nodig?

Als je hulp nodig hebt met Frigidaire FFEF3043LS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Frigidaire

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis