Frigidaire 5304493868 Handleiding

Frigidaire Vaatwasser 5304493868

Lees hieronder de 📖 handleiding in het Nederlandse voor Frigidaire 5304493868 (9 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

Deluxe Dishwasher Install Kit

5304493868

Trousse d’installation de lave-vaisselle de luxe

Kit de instalación de lavavajillas de lujo

5304493868 (March 2022)

Tools Required

Parts List

WARNING

ELECTRIC SHOCK HAZARD

Observe all national and local codes and ordinances for electrical and plumbing connections. Make sure electrical power has been

disconnected at fuse box or circuit breaker box. The dishwasher must be connected to a grounded metal, permanent wiring system. The

equipment-grounding conductor must be run with the circuit conductors and connected to the appliances equipment grounding terminal or lead.

Do not connect the dishwasher to the power supply until the appliance is permanently grounded. Failure to follow this warning could result in death

or serious injury.

This power supply has a 3-pronged grounded plug. The cord must be plugged into a compatible 3-pronged grounding wall receptacle, grounded

in accordance with all national and local codes and ordinances. If a properly installed wall receptacle is not available, it is the responsibility of the

customer to have a properly grounded receptacle installed. The wall receptacle should be within easy reach of this power supply cord. DO NOT USE

AN EXTENSION CORD! Such use can result in re, electrical shock, or other personal injury.

Braided Stainless Steel Hose

Strain Relief

T Connection ⅜ Threaded Connection Garden Hose Connection

Installation

⅜" Threaded Connection

A. Wrap the threads of the elbow with two turns of sealant tape

provided in the kit to ensure a leak-proof connection.

B. Connect and tighten the threaded end of the elbow to the

inlet water valve on the dishwasher.

C. Run the braided stainless steel waterline to the underside of

the dishwasher.

D. Remove and discard the compression nut and compression

ferrule from the elbow installed in step B.

E. Connect the ⅜” compression nut on the braided stainless

steel waterline to the elbow installed in step B above.

Garden Hose Connection

F. Verify that the hose washer is in the elbow before installing.

G. Connect the garden hose elbow to the dishwasher inlet

valve. Do NOT use the sealant tape on the dishwasher inlet

valve.

H. Hand tighten the garden hose elbow on the dishwasher inlet

valve and add a ¼ turn.

I. Run the braided stainless steel waterline to the underside of

the dishwasher.

J. Connect the ⅜" compression nut on the braided stainless

steel waterline to the elbow installed in step G above.

1. Waterline Connection

IMPORTANT

• Turn off both hot and cold water supply lines.

• Do not over tighten connections.

A. Locate the hot and cold water supply lines under the kitchen

sink.

B. Disconnect the kitchen faucet hot water riser tube from the

shut off valve.

C. Install the water supply T compression tube tting on the end

of the hot water faucet riser tube.

D. Connect the water supply T compression tting to the hot

water shut off valve.

E. Connect the braided stainless steel waterline to the water

supply connection.

2. Dishwasher Connection

Determine the type of water ll valve used on your dishwasher:

• If the valve has a ⅜" threaded connection, follow steps A

through E.

• If the dishwasher has a hose bib connection, follow steps F

though J.

• Do not overtighten.

3-Prong Grounded

Wall receptacle

Faucet

Hot water

Supply

Riser Tube

Strain Relief

Black or Smooth

(Hot) Connects to

Black dishwasher

wire

Green Wire

(Ground)

Green Wire

(Ground)

White or Ribbled

(Neutral) wire

connects to white

dishwasher wire

Water

Supply T

Commpression

Fitting

Hot Water

Valve

Dishwasher

Waterline

Garden

Hose Elbow

⅜” Threaded

Elbow

Plumber’s Sealant

Tape Here only

(Around threads on

⅜” Elbow)

4. Electrical Supply Connections

WARNING

ELECTRICAL SHOCK HAZARD

Do not plug in the power cord until all steps are complete.

A. Make sure electrical power is disconnected at the fuse box or

circuit breaker box.

B. Remove access panel at the bottom of the dishwasher.

C. Remove the electrical junction box cover located behind the

access panel at the bottom of the dishwasher. The electrical

connection wiring for the dishwasher (BLACK and WHITE

wires) are located inside this junction box.

D. Locate the UL listed strain-relief bushing included in the

hardware kit. See Figure 1.

E. Remove the lock nut from the strain relief bushing. Push the

strain relief bushing into the round opening of the junction box

to stabilize the wiring. The lock nut should be installed on the

strain relief bushing inside the junction box. See Figure 5.

F. Insert the power cord (wire exposed) into the box through the

strain-relief bushing installed in step E.

I. Connect the neutral wire of the power cord wire (identied by

the RIBBED insulation or WHITE insulator color) to the WHITE

wire on the dishwasher with the wire nut provided.

J. Tighten the strain-relief bushing screws and lock nut to

stabilize the power cord wiring. Check all connections to

ensure they are secure. Replace the junction box cover.

K. Restore electrical power at the fuse box or circuit breaker

box, then plug the power cord into the outlet.

L. Test for proper operation by running the dishwasher through

a ll, wash, and drain cycle. Inspect for leaks again (See step

3).

3. Check for Leaks

A. Turn on the hot and cold water supply valves under the sink.

B. Carefully inspect for leaks along ALL connections.

C. Tighten connections if leaks are found.

G. To attach the grounding wire (identied by GREEN insulation

or bare wire) on the power cord:

Wrap the grounding wire around the grounding screw and

tighten OR,

Connect to ground wire in the junction box.

H. Connect the hot wire (identied by the BLACK or smooth

insulation) of the power cord to the black wire on the

dishwasher using the wire nut provided.



NOTE

Ensure all wire nuts are tight.

Product specificaties

Merk:	Frigidaire
Categorie:	Vaatwasser
Model:	5304493868

Heb je hulp nodig?

Als je hulp nodig hebt met Frigidaire 5304493868 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Vaatwasser Frigidaire

Frigidaire FDSP450LAF Handleiding

28 Augustus 2023

Frigidaire FDSP4501AS Handleiding

28 Augustus 2023

Frigidaire FDPH4316AW Handleiding

26 Juli 2023

Frigidaire FDPH4316AB Handleiding

26 Juli 2023

Frigidaire FDPH4316AS Handleiding

26 Juli 2023

Frigidaire FDPH4316AD Handleiding

26 Juli 2023

Frigidaire FDPC4314AS Handleiding

26 Juli 2023

Frigidaire FDPC4314AB Handleiding

26 Juli 2023

Frigidaire FDPH431LAF Handleiding

26 Juli 2023

Frigidaire FDPC4314AW Handleiding

26 Juli 2023

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

De Dietrich DV301044J Handleiding

4 Januari 2025

Siemens SN65EX13CE Handleiding

28 December 2024

Bosch SBV4ECX30E Handleiding

28 December 2024

Bosch SMV25CX02E Handleiding

27 December 2024

Bosch SMV4ECX30E Handleiding

24 December 2024

Arcelik 6467 WF I Handleiding

24 December 2024

Bauknecht B2I HKD526 A Handleiding

23 December 2024

Philco PD 1046 ETX Handleiding

23 December 2024

Philco PDI 1468 BTX Handleiding

23 December 2024

Silvercrest IAN 310974 STG 1200 A1 Handleiding

14 December 2024