Focal Polyglass 130 VB Handleiding

Focal Speaker Polyglass 130 VB

Lees hieronder de 📖 handleiding in het Nederlandse voor Focal Polyglass 130 VB (17 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
Français page 7
THE FOCAL GUARANTEE ONLY APPLIES IF PAGE 15 IS
RETURNED US WIT HIN TO 10 DAYS OF PURCHASE .
POLYGLASS MULTI SPEAKER
U s e r M a n u a l
Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product.
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l'Avenir - 42353 La Talaudière
cedex - France - Tel. (+33) 04 77 43 57 00 - Fax (+33) 04 77 43 57 04 - www.focal-fr.com
Congratulations on choosing Focal automobile speakers.
Focal speakers remain high quality products, due to the multitude of advanced
materials used. Detailed research and development in the laboratory, from
dedicated engineers and technicians, played a major role in producing such high
performing products.
To gain the best results from your speakers, please ensure you follow these
recommendations. If not followed correctly any fault observed, may not be
covered by the guarantee.
Technical advances, included in the
Polyglass range
• Woofer and midrange membrane cones,
made using Polyglass material.
• TN47 tweeter using Focals renowned inverted
dome technology, with added Titanium Tioxid
5 surface treatment.
• Separate crossover, fully optimised with
ad-justable level control. High quality
components used throughout.
• Strong rigid chassis made from Zamak alloy.
• Motor unit constructed using neodymium
magnet, to be ultra compact, for easy
installation (Slim series).
• Membrane suspension in Butyl, for long live.
Included
• 2 x woofer / midrange
• 2 x TN47 tweeters
• 2 x gaskets (2 way)
• 2 x crossovers
• fixing screws
POLYGLAS S MULTI SPEAKER
U s e r M a n u a l 2
Important recommendations
Before attempting any installation work, it is very important to verify how much space is
available to fit the speakers into the vehicle.
Key points:
• For direct replacement of original speakers, please check there is enough space for your
new Focal speakers and grilles.
• Ensure the speaker is clean from debris and metallic particles that maybe attached (especially
after drilling).
• Use the foam gasket supplied (inside the grille), for airtight placement of the speaker into
the panel.
Choice of installation and positioning the tweeter
To achieve best results for your installation, please follow these simple guidelines
• Use a variety of speakers to achieve a large bandwidth, the most central possible.
• Speakers positioned in the most forward location possible, for correct staging.
• Mids and tweeters positioned preferably high in the doors or in the dash (if space
permitting), to obtain un-muddled high and midrange frequencies. These being directive
to the listener.
• To position the tweeters direct in-line to the listeners ears, for improved imaging.
Preferred woofer and
mid-range positions.
3 x preferred tweeter
positions
POLYGLAS S MULTI SPEAKER
U s e r M a n u a l 3
Cables and connections
• For best results with your Polyglass speakers, we recommend you include the use of
Focal cables.
• Alternatively, other high quality cable can be used, if sufficient section thickness is available
(minimum thickness = 1mm2). This is particularly important for long lengths of cable to
ensure a strong efficient signal is maintained.
• Always ensure the polarity is respected, (+ is connected to +) and (- is connected to -).
• Maintain correct connections, from principal source radio / amplifier (left / right / front and
rear), and crossover to speakers (tweeter to tweeter), (mid to mid)*, (woofer to woofer), is
always observed.
* For the 3 way models 165V3E and 270V3, the midrange is not shown.
Right Output
Left Output
Woofer
Tweeter
Woofer
Input
Input Tweeter
Fitting the tweeter
There are two mounting possibilities available:
surface or flush mount. The TN47 arrives supplied
in its flush-mounting pod. Very carefully, remove the
grille, by gently prizing it off (using a pointed tool),
then use the unlocking tool provided to turn the
tweeter and to remove it of its seating.
Surface mounting: Choose the angle that best
suits your installation (10° or 30°) and mount the
pod firmly using the screws supplied. Feed the wire
through the hole in the pod and re-fit the tweeter and
grille in place.
Flush mounting: Cut a neat 40mm diameter hole in
the panel where you want to place the tweeter. Then with the metal mounting strip held from
behind (ensuring the ends are pointing towards the hole), insert the screw through the flush-
mount pod from the front and tighten the two parts together. Feed the wire through the hole
in the pod and re-fit the tweeter and grille in place.
Grille
Unlocking tool
Tweeter
Pod
Mounting strip


Product specificaties

Merk: Focal
Categorie: Speaker
Model: Polyglass 130 VB

Heb je hulp nodig?

Als je hulp nodig hebt met Focal Polyglass 130 VB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Focal

Handleiding Speaker

Nieuwste handleidingen voor Speaker