Focal Electra SR 1000 Be Handleiding

Focal Speaker Electra SR 1000 Be

Lees hieronder de 📖 handleiding in het Nederlandse voor Focal Electra SR 1000 Be (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

ELECTRA® 1000 BE II

User manual / Manuel d'utilisation

English page 2

Français page 12

ELECTRA

1000 BE II

U s e r m a n u a l English

The Focal-JMlab guarantee only applies if the enclosed guarantee card is returned

to us within 10 days of purchase.

Now it’s possible to register on line : www.focal.com/warranty

Positioning

The loudspeakers have been engineered to deliver the most faithful sound reproduction, whether they are used for

music or home cinema. In order to enhance their performance, to guarantee a high quality of listening, sound image

and tone balance, it is important to note the following basic rules.

The listening area must be located at the summit of an equilateral triangle whose two other points of insertion are

determined by the position of each speaker. Nevertheless it is possible to modify these distances to find an ideal

compromise according to the particular disposition of the room .(fig.A)

Each loudspeaker must be placed at the same height and on the same floor plan. The tweeter should be at the

same height as the listener’s ear, when the listener is in their usual listening area . (fig.B)

Avoid placing the loudspeakers too close to the room’s corners or walls. This will induce some unwanted room

resonance and artificially increase bass response. On the contrary, if the bass level proves to be insufficient, it is

possible to move the speakers closer to the walls to adjust the bass level . (fig.C)

Optimization

For perfectionist people, we will give an optimum positioning rule: If A is the determined distance between the floor

and the middle of the two woofers (X), C is the distance between X and the side or back wall, then the distance B is

found with the

equation B2 = AC.

• Example: The woofer center is at 50cm from the floor (A= 50cm). We decide that the distance between X and the

side wall will be 72cm (C = 72cm), the loudspeaker will then have to be placed at 60cm from the back wall. B2= 50 x

72 = 3600 ( ). B = √3600 = 60cm.fig.D

Connections

The Electra Be II input sockets ensure reliable multipurpose connections for stripped cables as well as for plugs.

It is imperative to respect the connector polarity of both the loudspeaker and amplifier. The positive terminal

“+” must be connected to the corresponding (matching) amplifier’s terminal and the negative terminal “-“ to the

negative terminal . Stereo image, soundstaging and bass perception would be seriously compromised if these (fig.E)

conditions were not respected.

Running-in period

The drivers used in the loudspeaker are complex mechanical devices and require run-in period before they deliver

their best performance. They must get adapted to the tem-perature and humidity conditions of their environment.

This breaking-in period depends on the encountered conditions and can last several weeks. In order to shorten

this period, we advise you to let your loudspeakers operate for about twenty hours at medium level, playing standard

musical programmes, but with a large amount of bass.

Once the components of the loud-speakers are completely stabilized, it is possible to enjoy the real performance of

your loudspeakers.

Product specificaties

Merk:	Focal
Categorie:	Speaker
Model:	Electra SR 1000 Be
Kleur van het product:	Zwart
Gewicht:	12600 g
Breedte:	430 mm
Diepte:	190 mm
Hoogte:	390 mm
Connectiviteitstechnologie:	Bedraad
Aanbevolen gebruik:	Luidsprekerset
Impedantie:	8 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	4
Frequentiebereik:	72 - 40000 Hz
Gevoeligheid:	91 dB
Luidspreker soort:	2-weg
Versterker:	Extern
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	2
Aantal mid-range drivers:	2
Diameter mid-range driver:	6.5 "
Tweeter:	Ja
Crossover frequentie:	2400 Hz
Aanbevolen versterkingskracht (max):	40 W
aanbevolen versterkingskracht (min):	200 W