Flir T4350BN Handleiding

Flir Bewakingscamera T4350BN

Lees hieronder de đź“– handleiding in het Nederlandse voor Flir T4350BN (1 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
PACKAGE CONTENTS: Installing the Camera Adjusting the Camera
AA
Thermal Mini Bullet Camera
T4325BN / T4350BN SERIES
Quick Connection Guide
B
B
• Use an appropriate low voltage power cable to prevent fire or electrical shock.
• Make sure to install the camera in an area that can support the camera
weight.
• There are no user serviceable parts inside the camera. Please do not
disassemble the camera.
• Be careful not to leave fingerprints on the camera’s infared optics. Clean only
with low pressure fresh water and a lens cloth.
• Camera is rated for outdoor use (IP66), but is not intended for submersion in
water.
• If using DC power, make sure to follow the correct polarity as marked on the
power cable.
Ethernet Port: Connect the camera to a FLIR NVR or a router or switch
on your network using Cat5e or better Ethernet cable (not included). PoE
Class 3 supported.
Power Input: Connect a 12V DC power source if you are not using PoE.
Video Out (BNC): Analog video ouput to a test monitor (optional).
Ethernet Port: Not used.
Power Input: Connect a 12V DC power source (300mA or higher).
Video Out (BNC): Connect the camera to an analog DVR.
Ethernet Port: Install the MPX Terminator.
When you power up the camera with the
MPX Terminator installed, the camera operates as an MPX camera.
Power Input: Connect a 12V DC power source (300mA or higher).
Video Out (BNC): Connect the camera to a FLIR MPX DVR. Video and
MPX camera control are supported over a standard coaxial cable.
Safety PrecautionsWeights & Dimensions
C
C
Connecting the Camera
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Notice
1 2 3
Information in this document is subject to change
without notice. As our products are subject to continuous
improvement, FLIR Systems, Inc. and our subsidiaries reserve
the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2015 FLIR Systems, Inc. All rights reserved.
T4325BN_T4350BN_SERIES_QCG_EN_R1
D
D
Use the included mounting template to mark holes
for the screws.
Drill holes for the mounting screws.
Connect cables as shown in the section “Connecting
the Camera”.
Mount the camera to the surface using the included
mounting screws (4x).
NOTE: Use the included drywall anchors if installing
into drywall.
1 x IP Bullet Camera 1 x Mounting Template
Quick Start Guides
1 x Allen Key 1 x RJ45 Waterproof Cap
1 x MPX Terminator
4 x Mounting Screws 4 x Drywall Anchors 2 x Allen Set Screws
Use a Phillips head screwdriver (not included) to
loosen the adjustment screw on the camera stand.
IP / PoE
MPX
Analog
Move the camera to the desired position. Tighten the
adjustment screw when finished.
Insert the included Allen set screws (2x).
Tighten the Allen set screws with the included Allen
key.
3.1” / 78mm
0.95lbs / 0.43kg
Weight
6.8” /
173mm
2.8” /
72mm
Drywall anchors (4x)
Mounting screws (4x)
Mounting template
Adjustment screw
Allen set screws (2x)
1.
1.
1.
2.
2.
2.
3.
3.
3.
A
B
C
For support, visit
Latest software and manuals available on
www.flir.com/security/support
www.flir.com/security/support
12V DC Power Input Polarity
123

Product specificaties

Merk: Flir
Categorie: Bewakingscamera
Model: T4350BN

Heb je hulp nodig?

Als je hulp nodig hebt met Flir T4350BN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Flir

Flir

Flir FH-Series Handleiding

20 November 2024
Flir

Flir Saros DH-390 Handleiding

25 Juni 2024
Flir

Flir M324CS Handleiding

21 Juni 2023
Flir

Flir DNR7086 Handleiding

20 Juni 2023
Flir

Flir F-304 Handleiding

16 Juni 2023
Flir

Flir MD625 Handleiding

11 Juni 2023
Flir

Flir FB-393-O Handleiding

11 Juni 2023
Flir

Flir T4390BT Handleiding

9 Juni 2023
Flir

Flir Quasar CM-6308 Handleiding

8 Juni 2023
Flir

Flir F-313 Handleiding

3 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Provision ISR

Provision ISR I3-350IP5SMVF Handleiding

20 November 2024
Provision ISR

Provision ISR I2-350A-28 Handleiding

20 November 2024
Provision ISR

Provision ISR I4-350A-MVF Handleiding

20 November 2024
Canon

Canon PowerShot GOLF Handleiding

20 November 2024
EtiamPro

EtiamPro CCTVPROM23 Handleiding

17 November 2024
EtiamPro

EtiamPro CCTVPROM20W Handleiding

17 November 2024
Leviton

Leviton 68A02-2 Handleiding

17 November 2024
Reolink

Reolink RLK8-800D4 Handleiding

16 November 2024
Reolink

Reolink RLK16-800D8 Handleiding

16 November 2024
Reolink

Reolink RLK8-410B4 Handleiding

16 November 2024