Flir Pinnacle DPB14TLX Handleiding

Flir Bewakingscamera Pinnacle DPB14TLX

Lees hieronder de 📖 handleiding in het Nederlandse voor Flir Pinnacle DPB14TLX (10 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Please read this manual thoroughly before use and keep it handy for future reference.
Models: DPB14TLX
Ultra Resolution
Day & Night Bullet Camera
www.digimerge.com
V4.0
Ultra Resolution
Day & Night Bullet Camera
INSTRUCTION MANUAL
the
INTRODUCTION
Features
1/3” Sony Super HAD™ II CCD
Excellent low light performance using
Smart IR technology
0.15 Lux / F1.2 (Color)
0.001 Lux w/Sense-Up at x256
600 TV lines(Color) of resolution
(3D-DNR)3D Digital Noise Reduction
OSD menu control
True Day/Night with ICR
Privacy Masking / Motion Detection
OUT(BNC)VIDEO
Test Monitor Output
2.8-10.5mm Varifocal Day/Night Lens F1.4 DC Iris
Octagon junction box compatible
-3-
General DPB14TLX
Image Sensor 1/3” Sony Super HAD™ II CCD
Effective Pixel H: 768 V: 494
Effective Pixel Area H: 5.59mm V: 4.68mm
Scan System 2:1 Interlace NTSC
Scan Frequency H: 15.734KHz, V: 59.94Hz
Synchronization Internal
Minimum Illumination 0 Lux IR LED On
S/N Ratio 50dB @ AGC Off
Resolution 600 TV Line
White Balance Auto 1800°K ~ 10500°K
AES Speed 1/60~1/100000 Sec
Gain Control Auto
BLC Manual
Video Output 1.0Vpp @ 75 ohm
Termination BNC Female
Lens/ Lens Mount 2.8-10.5mm F1.4 Varifocal DC Auto Iris
Viewing Angle H: 96.7° ˜ 24.1°, V: 71.2° ˜ 18.2°, D: 124.3° ˜ 30.2°
Power Source 12V DC / 24V AC
Power Consumption Max 8.4W
Minimum Power
Requirement 700mA
Operating Temp Range -40°C ~ 50° C
Operating Range Within 90% RH
Dimensions (LxHxW) 298x101x88 mm
Gamma 0.45
SPECIFICATIONS
Polaris Vision 2 technology
0.0 w/IR LED
-5--4-
MEASUREMENTS INSTALLATION
PACKAGING CONTENT
PARTS DESCRIPTION
Bullet package contains the following:
Camera in housing ---------------------------------1
Instruction guide (This Document) -------------1
Mounting screw pack ------------------------------1
Service Video Cable -------------------------------1
Sunshield Screw to camera) -------------1
Allen Key ----------------------------------------------2
1a) Loosen the thread nut with the small
allen key and turn the camera base
counter clockwise to remove it from the
camera mount.
1b) Mount the camera base to the surface.
NOTE: The camera base is compatible with
an Octagon junction box.
2a) Attach camera back onto the camera
base by turning the camera clockwise.
2b) Tighten the thread nut to secure the
camera’s horizontal position.
3) Adjust lens zoom and focus by turning the
two external adjustment screws located
on the underside of the camera.
Adjustment can be made using fingers
or with a flathead screwdriver.
4) The OSD Settings and video test port are
accessed via the service access port
on the underside of the camera. Turn
the cap counter-clockwise to remove.
Note: Apply considerable pressure when
replacing the cap to keep camera
weather proof.
Zoom Adjust Service Access Pan / Tilt Adjustment 360 Rotate Rotate Lock
Thread Nut
Focus Adjust
Open Close
( ) Fitt ing ScrewsB
PA4 x mm cs35 4p
( ) Wall PlugsA
S8 x 30mm 4pcs
( ) Sunshield ScrewC
M5 Thread
1
2
3
4
CDS
298.6 mm
11.8"
100.9 mm
4.0"
101.5 mm
4.0"
88.0 mm
3.5"
b
C
( ) Allen KeysD
2c) Use the large allen key to adjust the
vertical viewing angle of the camera.
2d) Use the large allen key to twist the
camera around the mounting stand.
d


Product specificaties

Merk: Flir
Categorie: Bewakingscamera
Model: Pinnacle DPB14TLX

Heb je hulp nodig?

Als je hulp nodig hebt met Flir Pinnacle DPB14TLX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Flir

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera