Flir N233ZD Handleiding

Flir Bewakingscamera N233ZD

Lees hieronder de 📖 handleiding in het Nederlandse voor Flir N233ZD (1 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
PACKAGE CONTENTS:
1x CD
1x Micro PT IP Camera
Quick Start Guides
Installing the Camera
A
2.1MP HD IP Micro PT Camera
N233ZD
Quick Connection Guide
B
• Use an appropriate low voltage power cable to prevent fire or electrical
shock.
• Make sure to install the camera in an area that can support the camera
weight.
• There are no user serviceable parts inside the camera. Please do not
disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning material. Please use
a lint free micro-fiber cloth to clean the lens cover.
• Camera is rated for outdoor use (IP66), but is not intended for submersion
in water.
Safety PrecautionsWeights & Dimensions
C
Installing the Camera Connecting the Camera (continued)
0.6lbs / 0.3kg
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Notice
1 2 3
1x Allen Key
1. Ethernet Port: Connect the camera to an NVR or a router or
switch on your network using Cat5e or better Ethernet cable
(not included). PoE Class 3 supported.
2. Power Input: If not using PoE, connect the camera to a 12V
DC power source (300mA or higher required).
Remove the vinyl film from the camera lens once installation is
complete.
Information in this document is subject to change
without notice. As our products are subject to continuous
improvement, FLIR Systems, Inc. and our subsidiaries reserve
the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2014 FLIR Systems, Inc. All rights reserved.
www.flirsecurity.com/pro
For support, visit
Latest software and manuals available on
www.flirsecurity.com/pro
N233ZD_QCG_EN_R1
Weight
2.3” /
58mm
Connect cables as shown in the section “Connecting the Camera”.
D
Align the 3 notches on the side of the dome camera with the
3 corresponding pegs on the mounting plate. Push the camera
gently into the mounting plate until you hear a ‘click‘.
3x Mounting Screws
Use the included mounting template to mark holes for the
mounting screws and camera cable.
Drill holes for the mounting screws and camera cable.
NOTE: Use the included drywall anchors if installing on a drywall
surface.
Align the metal mounting plate so that the 3 screw holes in the
plate line up with the 3 holes drilled in the wall.
Attach the flat side of the mounting plate to the surface using the
included mounting screws (3x).
1
2
3x Drywall Anchors
Inserting the microSD Card
Resetting the Camera
5.1” /
130mm
ERemove the M2x5 screw from the side of the camera using the
included Allen key.
Drywall anchors (3x)
Mounting surface
Mounting plate
Mounting screws (3x)
M2x5 screw
F
H
I
J
NOTE: The pegs and notches only align one way. Do not force
the camera to fit into the mounting plate.
Notches (x3)
Pegs (x3)
Re-insert the M2x5 screw removed in Step E. Tighten firmly using
the included Allen key.
G
Ensure the camera is grounded with the
pre-inserted M2x5 screw.
A
B
Separate the camera from the mounting plate if needed.
Remove the 2 screws from the compartment
cover using a Phillips screwdriver (not included).
C
D
Slide the microSD carriage cover to open, then
lift upward.
Place a microSD card (not included) into the
carriage with the metal contacts facing down.
OPEN
LOCK
A
B
C
Separate the camera from the mounting plate
if needed.
Remove the 2 screws from the compartment
cover using a Phillips screwdriver (not included).
Press and hold the reset button for 4 seconds.
OPEN
LOCK
Close and lock the carriage cover. Replace the
compartment cover on the camera base.
E
Reset button
Replace the compartment cover on the
camera base.
D
1x Mounting Plate 1x Mounting Template
GND port

Product specificaties

Merk: Flir
Categorie: Bewakingscamera
Model: N233ZD

Heb je hulp nodig?

Als je hulp nodig hebt met Flir N233ZD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Flir

Flir

Flir FH-Series Handleiding

20 November 2024
Flir

Flir Saros DH-390 Handleiding

25 Juni 2024
Flir

Flir M324CS Handleiding

21 Juni 2023
Flir

Flir DNR7086 Handleiding

20 Juni 2023
Flir

Flir F-304 Handleiding

16 Juni 2023
Flir

Flir MD625 Handleiding

11 Juni 2023
Flir

Flir FB-393-O Handleiding

11 Juni 2023
Flir

Flir T4390BT Handleiding

9 Juni 2023
Flir

Flir Quasar CM-6308 Handleiding

8 Juni 2023
Flir

Flir F-313 Handleiding

3 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Abus

Abus TAS102 Handleiding

2 December 2024
Abus

Abus TVVR33602 Handleiding

2 December 2024
D-Link

D-Link DCS-8330LH Handleiding

1 December 2024
Vimar

Vimar ELVOX 693T Handleiding

1 December 2024
Pentatech

Pentatech DW700K Handleiding

24 November 2024
Pentatech

Pentatech DW700 Handleiding

24 November 2024
Pentatech

Pentatech AC92 Handleiding

24 November 2024
Technaxx

Technaxx TX-30 Handleiding

23 November 2024
QSC

QSC NC-110 Handleiding

21 November 2024
Provision ISR

Provision ISR I3-350IP5SMVF Handleiding

20 November 2024