Ferm JSV-600P Handleiding

Ferm Zaagmachine JSV-600P

Lees hieronder de 📖 handleiding in het Nederlandse voor Ferm JSV-600P (4 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Ferm B.V. • P.O. Box 134 • 8280 AC Genemuiden • NL• Internet: www.ferm.com 0208/09

UK Subject to change

Ferm Jig Saw

JSV-600P

USER’S MANUAL

Art.nr. 726065

Screwfix art.nr: 1932

Ferm 7

FERM JSV-600P JIG SAW

USERS MANUAL

TECHNICAL SPECIFICATIONS

PACKAGE CONTENTS

1 Jigsaw appliance

1 4 saw blades

1 Allen key

1 Parallel saw guide

1 Vacuum cleaner adapter

1 User manual

1 Warranty card

1 Safety advice

Check the machine and accessories for transport

damage.

PRODUCTINFORMATION

1. Speed control

2. Interlocking knob

3. Switch

4. Connection point vacuum cleaner

5. Allen key

6. Bottom plate

7. Saw buckle

8. Pendulum

9. Guard

ELECTRICAL INFORMATION

This product is complete with a pre-wired mains plug, it

is double insulated in accordance with EN 50144 – no

earth wire is required.

If the plug needs replacing follow these instructions.

Wire correctly

The wires in the mains lead are coloured in the following

way:

BLUE -Neutral

BROWN -Live

Securing wires

Secure wires carefully and firmly to the correct termi-

nals. Secure the mains cable in the plug cord grip firmly

Fit a 5-amp fuse. If a 13amp (BS1363) plug is used a (BS

1362) ASTA approved 5-amp fuse must be fitted.

Recycle/Dispose of old plug and cable

Prevent inadvertent connection to socket and risk of

electric shock

SAFETY INSTRUCTIONS

The following symbols are used in these instructions for

use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

Ferm products are manufactured to high quality stan-

dards they are safe and fit for purpose at time of sale, but

all tools can be dangerous if the correct precautions are

not taken. Always follow these instructions, do not carry

out the operation until you are sure you can do so in

safety. Remember to consider the work environment

for safe operation as well as safety for tool use.

Warning! When using electric tools, basic safety

precautions should always be followed to reduce

the risk of fire, electric shock and personal injury. Read all

these instructions before attempting to operate this product.

Save these instructions for future reference.

Brown

(Live)

Blue

(Neutral)

Fuse

(5 Amp)

Voltage | 230 V~

Frequency | 50 Hz

Input power | 570 W

Speed, no load | 500-3000/min

Max. material thicknes | 70 mm

Max. cutting stroke | 18 mm

Cutting angle | 0 - 45°

Machine weight | 2 kg

Lpa Sound pressure level | 90.4 dB(A)

Lwa Sound power level | 103.4 dB(A)

Vibration | 3.3 m/s2

2 Ferm

EXPLODED VIEW

SPARE PARTS

REF. NR. DESCRIPTION FERM NR.

6 CARBON BRUSH HOLDER 407800

7 CARBON BRUSH (SET) 407801

9 SWITCH 407802

10 SPEED CONTROL PLATE 407803

13 ADAPTER FOR VACUUM CLEANER 407809

15 STATOR 407804

17 ROTOR 407805

21 + 35-42 GUIDE WHEEL COMPLETE 407808

23 GEAR 407806

29-31 SAW MECHANISM COMPLETE 407807

- SIDE GUIDE 407810

Check for damaged parts

Do not use a tool with damaged parts, before further use a

damaged tool must be carefully checked by a qualified per-

son to determine that it will operate properly.

Check for alignment of moving parts, binding or breakage of

parts, mounting and other conditions that may affect its

operation.

A damaged part or guard should be properly repaired by an

authorised service centre, unless indicated otherwise in the

instruction manual. Have defective switches replaced by an

authorised service centre. Do not use a tool if the switch

does not turn on and off.

Have your tool repaired by an expert

This appliance is manufactured in accordance with rele-

vant safety standards. Only experts must carry out repai-

ring of electrical appliances, otherwise considerable dan-

ger for the user may result.

Storing tools

When not in use tools should be stored in the dry, out of

reach of children.

Lubrication

The machine requires a small amount of light oil on the

blade guide otherwise no other user lubrication

ENVIRONMENT

Recycle the packaging according to the identification

marks on it.

At the end of the product or its accessories life please

recycle where facilities exist - phone the Helpline for

current advice on recycling.

GUARANTEE

The guarantee conditions can be found on the separately

enclosed guarantee card.

We declare under our sole responsibility that this

product is in conformity with the following

standards or standardized documents

EN50144-2-10, EN50144-1

EN55014-1, EN55014-2, EN61000-3-2, EN61000-

3-3

in accordance with the regulations:

98/37/EEC

73/23/EEC

89/336/EEC

from 01-03-2000

GENEMUIDEN NL

W. Kamphof

Quality department

For any queries relating to operational or safety

matters contact:

Ferm Customer Helpline on: 0115 966 1199

Monday-Friday 8am – 6pm

Saturday 9am – 1 pm

DECLARATION OF CONFORMITY (UK)

6 Ferm

PERSONAL SAFETY

Use Personal Protection Safety Equipment

Protect eyes with safety glasses or goggles note: the use

of safety protective eyewear without the CE mark can

lead to serious injury if the lens breaks. A suitable dust

mask should be worn if cutting, drilling or sanding is

dusty, in particular chipboard or MDF.

Approved safety footwear and headgear should worn as

appropriate, for example on building works or when

heavy weights are involved. Wear suitable gloves and

apron to protect against sparks/debris. Wear earplugs

or ear defenders.

Dress properly

Do not wear loose clothing or jewellery. It can get caught

in moving parts. Non-skid footwear is recommended

when working out doors. Wear protective hair covering

to contain long hair.

Stay alert

Watch what you are doing Use common sense. Do not

operate tools when tired or after taking alcohol or pre-

scription/ non-prescription drugs.

OPERATIONAL SAFETY

Warning!

This machine can produce fine dust, which is harm-

ful to your health – always wear a suitable dust mask and

other protection equipment as appropriate.

Concentrate

Routine and repetition can lead to mistakes. Remember

that a slight lack of concentration can result in serious

injuries in a split second.

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Do not expose power tools to rain or use them in damp

or wet locations. Keep work area well lit. Do not use

power tools in the presence of flammable liquids,

vapours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (resi-

dual current device) to provide protection against elec-

trical shock. Prevent body contact with grounded surfa-

ces (e.g. pipes, radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the

tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was

intended.

Use the right tool

Do not force small tools or attachments to do the job of a

heavy-duty tool. Do not use tools for purposes for which

they were not intended; for example do not use a circular

saw for cutting trees or logs.

Do not abuse cable

Never carry the tool by the cable or pull it to disconnect

it from the power socket. Keep the cable away from heat,

oil and sharp edges. Do not touch the metal plug pins

when connecting or removing the plug.

Secure work

Use clamps or a vice to hold work. It is safer than using

your hand and it frees both hands to operate the tool.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing

accessories such as blades, bits and cutters. Always

switch off and unplug the saw from the power supply

before making adjustments or changing blades.

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit-

ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the

switch. Check that the switch is off before plugging in to

socket.

Outdoor use extension cables

When the tool is used outdoors use only an extension

cable intended for outdoor use and marked accordingly.

Use a RCD (residual current device)

This provides protection against electrical shock. Do

not use in rain or damp conditions.

Connect a dust extraction device

Whenever there are facilities for fitting a dust of fume

extraction system, make sure it is connected and used.

Use recommended accessories

The use of any other accessory or attachment other than

recommended in the instructions or catalogue may pre-

sent a risk of personal injury. Use extension cables suita-

ble for the power input of the saw (minimum cable size

1.5mm2). When using a cable reel unwind the cable fully.

BEFORE USING THE SAW

Do not use this machine without the footplate

mounted. This saw is for hand held use only. Do not

fix to bench or clamp in vice. Make sure the saw is switched

OFF and unplugged from mains.

SELECTING SAW BLADES

Use universal fitting jigsaw blades suitable for Ferm jig-

saws.

In general fine tooth pitch gives a slower cleaner cut – as a

guide chose a pitch of 2.5 to 4.00mm for wood and 1.00

to 1.50mm for metal. Blade material, tooth profile and

hardness is important, for the best performance.

Choose blades manufactured for the material you are

using.

Ferm 3

Product specificaties

Merk:	Ferm
Categorie:	Zaagmachine
Model:	JSV-600P

Heb je hulp nodig?

Als je hulp nodig hebt met Ferm JSV-600P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Ferm

Ferm CSM1042P Handleiding

10 Juni 2023

Ferm TSM1033 Handleiding

25 Mei 2023

Ferm RSM1015 Handleiding

10 Mei 2023

Ferm CSM1034 Handleiding

7 Mei 2023

Ferm FKS-210L Handleiding

27 April 2023

Ferm FZT-315 Handleiding

26 April 2023

Ferm RSM1007 Handleiding

14 April 2023

Ferm TCM1010 Handleiding

14 April 2023

Ferm JSM1033 Handleiding

10 April 2023

Ferm CSM1002 Handleiding

30 Maart 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Bosch PKS 55 Handleiding

23 November 2024

Shindaiwa 269TS Handleiding

19 November 2024

Shindaiwa 320TS Handleiding

19 November 2024

Shindaiwa 488 Handleiding

19 November 2024

Shindaiwa 352s Handleiding

19 November 2024

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024

Proviel STL 800 Handleiding

19 November 2024

Proviel PVBK 40 Handleiding

19 November 2024