Fender RR 263 Handleiding
Lees hieronder de š handleiding in het Nederlandse voor Fender RR 263 (4 pagina's) in de categorie Gitaarversterkers/-effecten. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
T H E S O U N T H A T C R E A T E S L E G E N D SD
P/N 047980
Owner,s Manual
ā63 Fender Reverb
TYPE: PR 263
Back in the days when blonde Showmans and
white Jaguars dominated the nationās bandstands
(and garages), there also existed a mysterious little
box called the Fender Reverb. This was before the
reverb we know and love today was ābuilt-inā to
Fender ampliļ¬ers. This inconspicuous device was
responsible for the socking wet surf sound of the
early 1960ās. Nobody really knew exactly how it
worked, but if you stuck it between your guitar and
amp, turned all the knobs up about half way, youād
soon be hanging ten on a pipeline tidal wave.
Of all the eļ¬ects devices produced over the past
40 years, the Fender Reverb has truly established
itself as the āindustry Standardā for the
self-contained, tube driven spring reverb. The
Fender Reverb has been used on thousands of
recordings and countless live performances since
the early 1960ās, when the ļ¬rst version appeared
on the music scene. Over the years, the Fender
Reverb has proven to be incredibly versatile, being
used for guitar, keyboards, vocals, accordion,
electric violin, and an amazing array of other
electriļ¬ed instruments. Whatever the application,
the Fender Reverb has always been able to
produce āthe right soundā.
Your new ā63 FENDER REVERB is a faithful
reproduction of an original 7963 Fender Reverb
(model 6G15 for historical or technical types).
Every eļ¬ort has been made to keep the circuit
exactly like the original. For improved reliability and
manufacturing eļ¬ciency, a printed circuit board for
the components is used in place of the original
āLeo boardā style phenolic parts panel used in the
older Fender ampliļ¬ers for many years. The power
and reverb transformers used in the ā63 FENDER
REVERB are built to the original speciļ¬cations that
are still in the Fender R&D department ļ¬les. Due to
the lack of availability, the original 6K6 power tube
has been replaced with a modern 6V6. Some
components used in this reissue product are
diļ¬erent in size and shape from the earlier version,
but the component values are identical.
If you compare a new ā63 FENDER REVERB with an
original model, the two units may sound slightly
diļ¬erent. Remember the reverb pan and ļ¬lter
capacitors in the original are probably over 30 years
old and their performance has changed over the
years.
The built in quality of a Fender electronic product
is the result of over four decades of dedication in
the combined research and development skills of
our engineers and musicians.
That is why we proudly say... FENDER, The
Sound That Creates Legends.
WARNING: No user serviceable parts inside.
Refer servicing to qualiļ¬ed personnel only.
Introduction
NOTE: BEFORE ATTEMPTING TO OPERATE YOUR
ā63 FENDER REVERB, turn the unit around and look
inside the back. You will see a metal lever near the back and
slightly left of center. This lever, when in the shipping or
traveling position, is pushed toward the front of the cabinet
and then to the right to lock. This lever pushes the inside of
the pan against a soft foam pad and prevents the springs in
the pan from being damaged due to excessive movement. To
release the lever to the playing position, push the lever
slightly forward and then to the left to unlock it. Let the lever
come back as for as it can to release the pan.
ā63 Fender Reverb top panel functions
A. POWER SWITCH-Turns the AC power ON and OFF.
When the switch is in the OFF position, the unit is
completely shut down.
B. FUSE-The fuse is in the AC supply of the ampliļ¬er and
will help to protect the ampliļ¬er and the operator in the
event of an electrical fault. If a fuse blows, it should only
be replaced with a fuse in accordance with the listing at
the fuse holder. If an ampliļ¬er repeatedly blows fuses, it
should be checked out by a qualiļ¬ed technician. UNDER
NO CIRCUMSTANCES should a fuse of a different type,
higher current rating, or a fuse bypass be used, as this
could damage the equipment and present a serious safety
hazard.
C. PILOT LIGHT-This lamp is illuminated when the
power is on.
D. DWELL-Adjusts the amount of signal sent to the reverb
pan. At low Dwell settings (two to four) the reverb sounds
much like a guitar played into a large room. At high
Dwell settings (above four) the reverb signal will start to
sound more āspringyā or ātwangyā.
E. INPUT-A high impedance plug-in connection for
instruments.
F. MIXER-The reverb āwetā signal and the ādryā signal are
mixed together at this control. The mixer adjusts what
percentage of the signal sent to the output jack is from the
reverb pan circuit compared to the dry signal. Higher
settings equal more reverb.
G. TONE-This control aļ¬ects only the āwetā portion of the
signal and acts much like the treble control on a guitar
ampliļ¬er. Turning the Tone control up allows more high
frequencies through from the reverb to the mixer control.
H. OUTPUT-This is the output jack that is used to send the
signal from the reverb unit to the ampliļ¬er.
Using your ā63 Fender Reverb
The ā63 Fender Reverb is designed to go between a low level
instrument (such as a guitar) and a high input impedance
ampliļ¬er (such as any Fender tube ampliļ¬er or the high
sensitivity input on any Fender solid-state ampliļ¬er). It
should be used only with the clean channel of the
ampliļ¬er as distorted reverb sounds very unnatural. If
you want to use the ā63 Fender Reverb with high gain or
distortion, you may use either a distortion pedal inserted
before the Reverb Unit or connect the Reverb Unit in the
effects loop of the amplifier and use the high
gain/distortion channel of the ampliļ¬er. However, since
most of the sonic beneļ¬ts of the ā63 Fender Reverb result
from the fact that the reverb signal is generated before
the tone controls and preamp gain circuitry of the
ampliļ¬er, we do not recommend using it in the eļ¬ects
loop.
Product specificaties
| Merk: | Fender |
| Categorie: | Gitaarversterkers/-effecten |
| Model: | RR 263 |
Heb je hulp nodig?
Als je hulp nodig hebt met Fender RR 263 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Gitaarversterkers/-effecten Fender
23 December 2023
19 November 2022
18 November 2022
18 November 2022
19 November 2022
18 November 2022
19 November 2022
19 November 2022
18 November 2022
19 November 2022
Handleiding Gitaarversterkers/-effecten
Nieuwste handleidingen voor Gitaarversterkers/-effecten
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023