Fender '63 Vibroverb Handleiding

Fender Gitaarversterker '63 Vibroverb

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Fender '63 Vibroverb (7 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
T H E S O U N T H A T C R E A T E S L E G E N D SD
P/N 037307
Owner,s Manual
ā€˜63 Vibroverb
Your ā€œnewā€ ā€˜63 VIBROVERB amplifier is living proof of the
quality and longevity of Fender amplifier designs.
Fender first introduced the VIBROVERB in the early part of
1963. Unlike many of the other Fender amplifiers that
were produced for years, this version of the VIBROVERB
had a production life of less than 4 months. It is estimated
that fewer than 600 VIBROVERB units were ever produced.
This limited production is one of the reasons this amplifier
has become highly sought after by vintage amp collectors.
The VIBROVERB was the first Fender production model to
have both reverb and vibrato as built-in ā€œeffectsā€.
The original VIBROVERB shows Fender in a transitional
period with amplifiers changing from tweed covering to
brown ā€œTolexā€ and eventually to black ā€œTolex.ā€ In the sum-
mer and fall of 1963, Fender changed the speaker configu-
ration of the VIBROVERB to a 15 inch speaker and the
brown ā€œTolexā€ covering changed to black. The single 15
inch model is also fairly rare, but the 2-10 version is leg-
endary.
Fender’s ā€˜63 VIBROVERB re-issue amplifier is based on the
original cosmetics, sound and circuit. Every effort was
made to be true to the original.
Several changes have been made for safety and reliability
reasons. A printed circuit board is used rather that the
phenolic ā€œparts panelā€ of the sixties. A 3-prong line cord is
required for safety reasons. Minor modifications to the cir-
cuit took place since certain parts are no longer available,
but every effort was made to keep the original circuit values
and sound the same. We resisted the temptation to
ā€œimproveā€ the amp with features found on later models like
master volume, effects loop or channel switching. In order
to improve reliability, a solid state rectifier was used rather
than a 5AR4 tube. Since the ā€˜63 VIBROVERB uses a solid
state rectifier, there is one less tube and tube socket than an
original VIBROVERB. All internal circuit voltage values
have been precisely matched to the new solid state rectifier
to insure exact sonic reproduction and no alterations to the
ā€œvintageā€ sound. On the original model, the Reverb /
Vibrato Footswitch connected to the unit via 2 RCA style
jacks; this has been changed to a more reliable 1/4ā€ jack.
The reverb pan cables now connect more securely to the
chassis also.
The VIBROVERB is unique in Fender amplifier history by the
implementation of its tone circuit. The VIBROVERB was the
first and ONLY Fender amplifier to use this type of tone cir-
cuit. The treble control is ā€œtapped,ā€ meaning it responds
more like an active tone control allowing boost AND cut of
high frequencies. Conventional Fender tone circuits pro-
vide a small amount of tone shaping even in the ā€œ0ā€ posi-
tion, but if the VIBROVERB Treble Control is set to about
ā€œ5ā€, the response is flat.
The speakers used in the ā€˜63 VIBROVERB are reproductions
of the original speakers made by the Oxford Speaker
Company. When Fender started work on this project,
Fender contacted Oxford who still had much of the original
tooling and documentation of this 10 inch speaker from the
early sixties.
The power and output transformers used in the ā€˜63
VIBROVERB are built to the original specifications, which
are still in the R&D engineering files at Fender’s office. The
same ā€œdirect-coupledā€ oscillator circuit is used for generat-
ing the vibrato. The reverb sound from the VIBROVERB is
ā€œwarmerā€ than later Fender amps due to the unique reverb
send and recovery circuit.
The cosmetics of the ā€˜63 VIBROVERB incorporate the brown
ā€œTolexā€ and ā€œEcruā€ grill cloth used in 1963. We have re-
tooled the ā€œļ¬‚atā€ Fender logo and have added the original
tilt-back legs found on so many Fender amps through the
sixties and seventies.
It is suggested that you read this manual thoroughly to
understand all the features and functions of your new
amplifier. The purchase of a Fender amplifier will provide
years of musical enjoyment and the ā€˜63 VIBROVERB helps
keep the Fender legend going strong.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR
MOISTURE!
INTRODUCTION
ā€˜63 VIBROVERB FRONT PANEL FUNCTIONS
NORMAL CHANNEL INPUTS - Plug-in connection for
instruments. Input 1 provides 6 dB more gain that
input 2. The NORMAL CHANNEL is affected by the
VIBRATO feature only. The REVERB feature does not
affect the NORMAL CHANNEL.
NORMAL CHANNEL VOLUME CONTROL - Adjusts the
overall loudness of the NORMAL CHANNEL.
TREBLE CONTROL - Adjusts the amount of high fre-
quency boost (accentuation) or cut (attenuation) in the
NORMAL CHANNEL.
BASS CONTROL - Adjusts the amount of low frequency
boost or cut in the NORMAL CHANNEL.
BRIGHT CHANNEL INPUTS - Plug-in connection for
instruments. The BRIGHT CHANNEL provides extra
treble boost, especially at low volume settings. Input 1
provides 6 dB more gain that input 2. The BRIGHT
CHANNEL is affected by both the REVERB and
VIBRATO features.
BRIGHT CHANNEL VOLUME CONTROL - Adjusts the
overall loudness of the BRIGHT CHANNEL.
TREBLE CONTROL - Adjusts the amount of high fre-
quency boost or cut in the BRIGHT CHANNEL.
BASS CONTROL - Adjusts the amount of low frequency
boost or cut in the BRIGHT CHANNEL.
REVERB CONTROL - Adjusts the amount of reverberat-
ed signal that is mixed in with the original, dry signal.
Turning the control full counter-clockwise turns the
REVERB feature off. The REVERB feature can also be
turned on and off using the footswitch. Note that the
REVERB feature does not affect the NORMAL CHAN-
NEL.
VIBRATO SPEED CONTROL - Adjusts the speed of the
VIBRATO feature.
A,B.
C.
D.
E.
F,G.
H.
I.
J.
K.
L.


Product specificaties

Merk: Fender
Categorie: Gitaarversterker
Model: '63 Vibroverb

Heb je hulp nodig?

Als je hulp nodig hebt met Fender '63 Vibroverb stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterker Fender

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker