Fellowes Lotus DX Handleiding

Fellowes Bureau Lotus DX

Lees hieronder de 📖 handleiding in het Nederlandse voor Fellowes Lotus DX (26 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/26

Lotus™ DX Sit-Stand Workstation

1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com

PLEASE READ INSTRUCTIONS BEFORE USE.

DO NOT DISCARD.

LIRE LES INSTRUCTIONS AVANT UTILISATION.

NE PAS JETER.

LEA LAS INSTRUCCIONES ANTES DEL USO.

NO TIRAR.

BITTE LESEN SIE DIE ANLEITUNGEN SORGFÄLTIG DURCH,

BEVOR SIE DAS GERÄT BENUTZEN.

BITTE GUT AUFBEWAHREN.

LEGGERE LE ISTRUZIONI PRIMA DELL’USO.

NON GETTARE.

LEES DE INSTRUCTIES VOOR GEBRUIK.

NIET WEGWERPEN.

LÄS DESSA INSTRUKTIONER FÖRE ANVÄNDNING.

KASSERA EJ.

PRZED UŻYCIEM PROSZĘ PRZECZYTAĆ NINIEJSZĄ INSTRUKCJĘ.

NIE WYRZUCAĆ.

ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПРОСЬБА ОЗНАКОМИТЬСЯ С

ИНСТРУКЦИЯМИ.

НЕ ВЫБРАСЫВАТЬ.

LEIA AS INSTRUÇÕES ANTES DA UTILIZAÇÃO.

NÃO AS ELIMINE.

CUSTOMER SERVICE & SUPPORT

www.fellowes.com

Europe Freephone: 00800-1810-1810

Benelux: +31-(0)-13-458-0580

Deutschland: +49 (0)511 545489-0

France: +33 (0) 1 78 64 91 00

Italia: +39-071-730041

Polska: +48 (22) 205-21-10

España/Portugal: +34-91-748-05-01

United Kingdom: +44 (0) 1302 836836

Australia: 1800 33 11 77

W.E.E.E.

This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this product please ensure that

you do so in accordance with the European Waste of Electrical and Electronic Equipment (WEEE) Directive and in compliance with local

laws relating to this directive.

For more information on the WEEE Directive please visit www.fellowes.com/WEEE

Declaration of Conformity

Fellowes, Inc.

Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Lotus™ DX Sit-Stand

Workstation conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Electromagnetic

Compatibility Directive (2014/30/EU), the WEEE directive (2012/19/EU), and below harmonized European EN Standards.

EMC: EN 55032:2015

EN 55024:2010/A1:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

Year Affixed: 17

Itasca, Illinois, USA

August 1, 2017

John Fellowes

LotusDX_SitStand_872353_RevD_10L_110217.indd 8-1 11/3/17 10:24 AM

ENGLISH

Lotus™ DX Sit-Stand Workstation

SAFETY INSTRUCTIONS/WARNING

CONTENTS

Read and follow all instructions and warnings before use.

Only compatible with Fellowes Monitor Arm Kit for Lotus. Visit www.Fellowes.com for more information.

Workstation

Power supply USB cord Power cord

Cord Funnel

Cable zip/tool

Velcro

STEP 2

Place your monitor, keyboard and mouse on the workstation. Use

the enclosed Velcro to secure the monitor(s) to the workstation.

Leave the monitor cover plate in place unless using the Fellowes

Monitor Arm Kit for Lotus.

STEP 3

Using both hands, push down slightly and engage both levers to

raise the workstation to the highest position.

≤ 13.6 Kg

≤ 30 lbs

≤ 2.2 Kg

≤ 5 lbs

SET-UP

STEP 1

Use 2 people to place the sit stand on your desk. Be sure that the front edge

of the keyboard platform aligns with the desk edge.

CAPABILITIES

1 2 3 4

• WARNING: PINCH POINT! KEEP HANDS CLEAR OF SUPPORT BARS DURING

OPERATION. SERIOUS INJURY MAY OCCUR.

• DO NOT EXCEED MAXIMUM STATED WEIGHT CAPACITY. SERIOUS INJURY OR

PROPERTY DAMAGE MAY OCCUR.

• CAUTION: Lift hazard! Two people are required to move workstation. Serious injury

may occur.

• Keep cables clear of support bars during operation, follow the cable routing

instruction in this manual. Failure to follow these instructions may result in

equipment damage or personal injury.

• DO NOT lean on the keyboard platform.

• DO NOT adjust counter balance until all equipment and accessories have been

placed on the workstation.

• This product is spring assisted and should never be used with less than 10 lbs.

(4.5kg) of weight. With caution, use both hands to push down slightly and engage

both levers. Failure to do so may result in injury or property damage.

• Only compatible with Fellowes Monitor Arm Kit for Lotus.

• Make sure the desk or mounting surface is level and can support the combined

weight of the workstation and accessories.

• Remove all equipment and accessories from the workstation before moving.

• Manufacturer certifies that product meets or exceeds applicable ANSI/BIFMA

standards.

• Use Velcro if not using monitor arms. Velcro is single use.

• The Lotus is for charging Qi™ compatible smartphone only.

• Only use the power cable and transformer that was supplied with this product.

• It is normal for the wireless charging surface to get warm during charging. If

there is an issue while charging, the indicator lights will flash.

• Keep flammable materials away from charging surface.

• Only use the wireless charger for its intended purpose. Improper use, or use of

incompatible devices may result in a risk of fire, explosion, or other hazard.

• DO NOT attempt to charge a device that is damaged or an open battery case or

a device that is not Qi™ compatible.

• DO NOT disassemble the wireless charger and USB device.

• DO NOT use if power cord or transformer is damaged.

• Keep the wireless charging surface clean and dry.

• Use a soft, clean, dry cloth to clean the surface of the wireless charger.

Rear

USB

Hub

Port Description Specifications

1 Type B Connector Data Transfer (to computer)

2 Barrel Connector Power (8A)

3 USB Port (Data Transfer) USB 3.0, 900mA

4 USB Port (Data Transfer) USB 3.0, 900mA

Front

Panel

5 USB Port (Charging Only) USB 3.0, 2.1A

6 USB Port (Charging Only) USB 3.0, 2.1A

7 1AWireless Charging Pad

LotusDX_SitStand_872353_RevD_10L_110217.indd 2-3 11/3/17 10:24 AM

STEP 4

Slide the end of the cable zip into the cord funnel to lock into place.

STEP 3

Gather all cords, including the monitor cords. Apply the cable zip using the provided tool.

Push the Cable Zip upward

into the Cable Zip Tool.

Pull down on the Cable Zip tool while

holding the top of the Cable Zip.

STEP 2C

The rear USB ports are meant for data transfer devices. Plug your mouse

and keyboard into the rear USB hub and route the remaining cords

through the cord funnel.

STEP 2B

Continue routing the cords around the workstation through the cord channel to the rear. Insert the cord funnel in 1 of 2 locations on the cord channel.

Choose the location that will best accommodate your setup.

STEP 2A

Route the keyboard and mouse cords through the opening in the keyboard platform. Be sure to anchor the cords with the clip on the underside of the

platform. Failure to follow these instructions may result in equipment damage or personal injury.

Ensure the workstation is at the highest position. Follow all cord routing instructions to ensure cables are not pinched by the support bars. Make sure

the cables are long enough to accommodate the full range of motion (17”/432mm).

CORD MANAGEMENT

STEP 1

Setup the charging stations by connecting the power cord to the power supply and the power supply to the rear USB hub port 2. Plug the power cord

into the nearest outlet. In order to use USB ports 3 and 4 for your mouse and keyboard, you will need to plug the provided Type B/USB cord into port

1 and the USB end into your computer, docking station or monitor*.

*Monitor needs to be connected to computer via additional Type B/USB cord (not included).

TENSION ADJUSTMENT

Patent pending Smooth Lift Technology™ makes it effortless to raise and lower your sit-stand. Place items onto the workstation and raise up to the

highest position. Lotus is shipped at the lowest setting which will help offset 10lbs/4.5kg. Turn the knob clockwise to offset heavier weights, up to 29

full rotations to offset 35lbs/15.8kg. As a guideline, approximately 10 full rotations are needed to offset a dual monitor setup. The exact number of

rotations depends on your personal comfort. Once you have properly adjusted the Lotus, it should feel effortless to raise and lower.

LotusDX_SitStand_872353_RevD_10L_110217.indd 4-5 11/3/17 10:24 AM

Product specificaties

Merk:	Fellowes
Categorie:	Bureau
Model:	Lotus DX
Kleur van het product:	Zwart
Gewicht:	23000 g
Breedte:	831.9 mm
Diepte:	616 mm
Hoogte:	139.7 mm
In hoogte verstelbaar:	Ja
Montagewijze:	Vrijstaand
Type stroombron:	DC
Meegeleverde kabels:	USB
Land van herkomst:	China
Maximale gewichtscapaciteit:	15.8 kg
Draadloos opladen:	Ja
Inclusief netsnoer:	Ja
Aansluiting voor netstroomadapter:	Ja
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	4
Aantal displays ondersteund:	2
Stroomadapter inbegrepen:	Ja
Verbeterd kabelbeheer:	Ja
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Aantal USB 3.2 Gen 1 (3.1 Gen 1) Type-B poorten:	1
Hoogte verstelbaarheidsbereik:	10 - 442 mm
Toetsenbordblad max. gewicht:	2.2 kg
Keyboardlade:	Ja
Maximaal draagvermogen (per display/scherm):	13.6 kg
Kabelkoord met klittenband:	Ja
USB-oplaadstroom:	2.1 A
Kabelmof inbegrepen:	Ja
Draadloze laadstroom:	1 A