Fellowes Cosmic Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fellowes Cosmic (6 pagina's) in de categorie Lamineersysteem. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
fellowes.com
Personal Laminators
Please read these instructions before use.
Veuillez lire ces instructions avant utilisation.
Lea estas instrucciones antes del uso.
Bitte lesen Sie diese Anleitungen sorgfältig, bevor Sie das Gerät benutzen.
Prima dell’uso, si raccomanda di leggere questo manuale di istruzioni.
Gelieve deze instructies te lezen vóór gebruik.
Läs dessa instruktioner före användningen.
Læs venligst denne vejledning før anvendelse.
Lue nämä ohjeet ennen käyttöä.
Vennligst les nøye igjennom denne bruksanvisningen før bruk.
Przed użyciem proszę przeczytać instrukcje.
Перед началом эксплуатации обязательно прочите данную инструкцию.
Παρακαλείσθε να διαβάσετε αυτές τις οδηγίες πριυ χρησιμοποιήσετε το προϊόν.
Kullanmadan önce lütfen bu talimatlari okuyun.
Před použitím si pročtĕte tyto pokyny.
Pred použitím si prečítajte tieto pokyny.
Használat előtt kérjük, olvassa el az alábbi utasításokat.
Leia estas instruções antes da utilização.
2
ENGLISH
CAPABILITIES
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
To prevent electrical shock, do NOT use laminator close to
water and do NOT spill water on laminator, electric cord, or
wall socket.
Do not leave electric cord in contact with a warm surface.
Do not leave electric cord hanging from a cupboard or shelf.
Do not use laminator if electric cord is damaged.
Do not laminate metal objects.
Only use pouches specically designed for the lamination setting (Hot or Cold) you
intend to use.
Always supervise children during laminator operation.
• Keep pets away from laminator while in use.
Switch off and unplug laminator when not in use.
Do not open or attempt to repair the laminator yourself, as this could result in electric
shock and will void your warranty. Contact Customer Service if you have questions. Please
note the warranty does not apply in cases of abuse, mishandling or unauthorized repair.
Always wrap cord around cable management feet while carrying or in storage.
• Always put item in a pouch. Never laminate an empty pouch.
Trim excess pouch material from around your item after laminating and cooling.
If using both hot and cold lamination in one session, use the cold setting rst
to avoid having to wait for the laminator to cool down.
With self-adhesive pouches, use the laminator on the cold setting for a
smoother nish.
TIPS
Before laminating valuable items, do a test run with an item similar in size and thickness.
When not in use, wrap cord around feet for portable ease and optimal storage.
• When laminating heat-sensitive documents (i.e., tickets, ultrasounds, etc.) only use self-
adhesive pouches on a cold setting.
• Use a dry-erase marker for writing on laminated pouches.
Pouch/Document Entry
Wait Light (red)
Carry Handle - for easy
portability and tray support
Ready Light (green)
Dual-Purpose Tray - serves as
guide and protective dust cover
On/Off/Hot/Cold
Lamination Selector
Cord Wrap/Feet - for optimal
cord management and storage
Wait
Light
(Do Not
Laminate)
Indicator Light Key
Cold
Lamination
Off Hot
Lamination
Ready
Light
Anti-Jamming
Release Lever
A4 A3
Pouch Thickness 75-100 microns 75-100 microns
Estimated Heat-Up Time 6 Minutes 6 Minutes
Approximate Cool-Down Time 90 Minutes 90 Minutes
Lamination Speed 30 cm/Minute 30 cm/Minute
A4 A3
Maximum Width 220 mm 330 mm
Voltage 220 - 240V~ 220 - 240V~
Frequency 50/60 Hz 50/60 Hz
1 2 3 4 5
1 2 3 4 5
COLD LAMINATION STEPS
TROUBLESHOOTING
WARRANTY
Fellowes warrants all parts of the laminator to be free of defects in material and workmanship
for 2 years from the date of purchase by the original consumer. If any part is found to be defec-
tive during the warranty period, your sole and exclusive remedy will be repair or replacement,
at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases
of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PROD-
UCT. This warranty gives you specic legal rights. You may have other legal rights that vary from
this warranty. The duration, terms and conditions of this warranty are valid world-wide, except
where different limitations, restrictions or conditions may be required by local law. For more
details or to obtain services under this warranty, please contact us or your dealer.
Problem
Ready Light does not go on after extended
time.
Ready Light does not go on for cold
lamination.
Pouch did not completely adhere to item.
Jamming
Cause
Laminator is in a hot, humid area.
If you used the hot lamination setting before a cold lamina-
tion session, the laminator may need time to cool down.
Laminated item may be too thick.
Laminated item was not immediately removed from
machine or small items were laminated without a carrier.
Pouch was not used.
Pouch was not centered or straight when fed through
Pouch/Document Entry.
Solution
Move laminator to a cool dry area.
Wait 90 minutes for laminator to fully cool down.
Pass through laminator a second time.
Press release lever, in back of laminator, to gently pull pouch
out of machine. Use cleaning sheet before laminating.
Always put item in a pouch.
Align sealed edge with Pouch/Document Entry. Use guide
to center.
HOT LAMINATION STEPS
Slide power button to Cold
Setting and wait for green Ready
Light.
To prevent jamming, immediately
remove laminated item from back
of machine.
Place pouch, sealed edge first,
into laminator entry. Keep pouch
straight and use the edge guide
to center it. Continue peeling the
protective sheet away.
Center item on clear side against
sealed edge; documents cannot
be repositioned once laminated.
• Plug laminator into power
outlet.
• Position laminator so you
have enough space to allow
items to pass freely through
the machine.
Slide power button to Hot
Setting and wait for green
Ready Light.
Place pouch, sealed edge first,
into laminator entry. Keep pouch
straight and use the edge guide
to center it.
To prevent jamming, immediately
remove laminated item from back
of machine. Let item cool on flat
surface for several seconds.
Before switching off laminator,
feed empty cleaning/carrier sheet
through machine to clean unit.
Use Fellowes®
brand pouches for
best results. Select
correct pouch size
for laminated item.
Place item inside pouch against
the sealed edge. To prevent
jamming, use a carrier when item
is smaller than the pouch.
CAUTION: Only use self-adhesive pouches when laminating with a cold setting.
Peel a small part of the protective
sheet away from document.
3
BEFORE YOU LAMINATE
Need Help?
Please call our experts at Customer
Service. You’ll find the numbers for
your nearest Service Centre on the
cover of this booklet.


Product specificaties

Merk: Fellowes
Categorie: Lamineersysteem
Model: Cosmic
Gewicht: 3100 g
Afmetingen (B x D x H): 448 x 144 x 246 mm
Voorverwarmingstijd: 6 min
Lamineersnelheid: 300 mm/min
Maximale lamineerbreedte: 330 mm
Veiligheidsfuncties: HeatGuard

Heb je hulp nodig?

Als je hulp nodig hebt met Fellowes Cosmic stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamineersysteem Fellowes

Handleiding Lamineersysteem

Nieuwste handleidingen voor Lamineersysteem

GBC

GBC Pinnacle 27 Handleiding

5 December 2024
SEAL

SEAL 65ProMD Handleiding

5 November 2024
GBC

GBC Catena 65 Handleiding

5 November 2024
SEAL

SEAL 65 EL Handleiding

20 Oktober 2024
Peach

Peach PL900 Handleiding

8 Augustus 2024
Peach

Peach PBP350 Handleiding

8 Augustus 2024
Peach

Peach PL125 Handleiding

8 Augustus 2024
Peach

Peach PL707 Handleiding

8 Augustus 2024
Peach

Peach PL750 Handleiding

8 Augustus 2024