Extech 42275 Handleiding

Extech Meetapparatuur 42275

Lees hieronder de 📖 handleiding in het Nederlandse voor Extech 42275 (22 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/22
SW276
User Guide
Model 42265 Temperature Datalogger Kit
Model 42275 Temperature and Humidity Datalogger Kit
Model SW276 Datalogging Software
V7.1 1/08
2
Introduction
Congratulations on your purchase of Extech Instrument’s Datalogging instrumentation and
software. This User Guide serves three purposes, refer to the list below:
1. This User Guide covers the following products entirely with regard to hardware and
software operation:
Model 42275: Temperature and Humidity Datalogging Module with docking station and SW276 Windows
TM
Software
Model 42265: Temperature Datalogging Module with docking station & SW276 Windows
TM Software
Model SW276: WindowsTM Datalogging Software
2. This User Guide covers the following products with regard to software and some
hardware operation. A separate manual is supplied with your instrument that covers all
of the hardware operation.
Model 42276: Temperature & Humidity Datalogging Module plus printing/docking station & Optional
SW276 WindowsTM Software
Model 42266: Temperature-only Datalogging Module plus printing/docking station & Optional SW276
WindowsTM Software
Model 42270: Temperature and Humidity Datalogging Module
Model 42260: Temperature-only Datalogging Module
3. This User Guide covers the following products with regard to software only; all other
information regarding hardware is covered in a separate, dedicated manual supplied
with the instrument.
Model 42280: Temperature and Humidity Datalogger (Software instructions only)
Applications
The Datalogging modules models 42270 and 42260 can be used to monitor the
temperature of greenhouses, warehouses, food transports, aircraft cabins, refrigerated
trucks, containers, museums, and HVAC equipment. The Model 42270 records Relative
Humidity readings in addition to temperature readings. Modules can store 16,000 (8000
temperature and 8000 %RH for 42270) readings that can later be transferred to PC or
directly printed using the Model 42276 Programmer/Printer.
Important note on the Model 42280 Temperature/Humidity Datalogger
Note that the Model 42280 has its own User Guide. Please refer to
the separate User Guide supplied with the Model 42280 for details
on the meter’s operation. This manual covers only the Datalogging
software with regard to the 42280. Install the supplied Software as
described on the program CD’s label and then skip to page 5 of this
manual for software instructions.
Model 42280
The datalogger module display will not switch
on until activated through the software
The datalogger module display will not switch on until it is activated by the
software in the LOGGER SET menu as described later in this manual. In
LOGGER SET the user selects the type of recording activation. When the
lo
gg
er be
g
ins to lo
g
data
,
the dis
p
la
y
and status LEDs will switch on.
V7.1 1/08
3
REC HI LOW COMM
RH%
°C
°F
Description
1. LCD display
2. Mounting hole
3. Docking station
4. Interface Cable
5. Status LEDs
6. Software CD
Displays
LCD Display
REC: Displayed while logging readings. Read the ‘Recording
Status’ section for further details.
HI and LOW: Displayed when the High or Low Alarm limit is
exceeded. See ‘Alarm Status’ below for further information.
RH%: Relative Humidity (42270 and 42275 only)
C or F: Temperature units.
COMM: Appears when Datalogger is communicating with a PC.
Recording Status Indication
Both the RED status LED and the display indicator ‘REC’ will flash every 5 seconds if the
sampling rate is set to 5 seconds or higher. If the sampling rate is set lower than 5
seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
ALARM Status Indication
Both the YELLOW status LED and the display indicator ‘ALM’ will flash when the recorded
value is higher than the user programmed High Alarm value or lower than the Low Alarm
value. The Alarm status LED and the ‘ALM’ display indicator flash every 5 seconds if the
sampling rate is programmed for 5 seconds or higher. If the sampling rate is set lower than
5 seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
Low Battery Indication
When the lithium battery’s voltage nears the critical operating level the LCD displays ‘LO’.
To replace the battery, refer to the Battery Replacement section of this manual.

Product specificaties

Merk: Extech
Categorie: Meetapparatuur
Model: 42275

Heb je hulp nodig?

Als je hulp nodig hebt met Extech 42275 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Meetapparatuur Extech

Extech

Extech 380926 Handleiding

22 Oktober 2024
Extech

Extech 380941 Handleiding

22 Oktober 2024
Extech

Extech PRC20 Handleiding

21 Augustus 2024
Extech

Extech PRC30 Handleiding

21 Augustus 2024
Extech

Extech SD900 Handleiding

21 Augustus 2024
Extech

Extech PRC15 Handleiding

21 Augustus 2024
Extech

Extech 412300A Handleiding

21 Augustus 2024
Extech

Extech 412400 Handleiding

21 Augustus 2024
Extech

Extech 433201A Handleiding

21 Augustus 2024
Extech

Extech SD910 Handleiding

21 Augustus 2024

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

PCE Instruments

PCE Instruments PCE-LOC 10 Handleiding

3 December 2024
PCE Instruments

PCE Instruments PCE-HVAC 6 Handleiding

3 December 2024
PCE

PCE -IVE 320 Handleiding

3 December 2024
PCE

PCE -IVE 330 Handleiding

3 December 2024
PCE Instruments

PCE Instruments PCE-VE 260HT Handleiding

3 December 2024
Kern

Kern ORA 1WB Handleiding

30 November 2024
Uni-T

Uni-T UT383s Handleiding

30 November 2024
Uni-T

Uni-T UT363s Handleiding

30 November 2024
Uni-T

Uni-T UT18D Handleiding

30 November 2024
Kogan

Kogan KASMSRTHZ1A Handleiding

25 November 2024