EverFocus EZA1540 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EverFocus EZA1540 (7 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
EZA1540 eZ.HD Series
5MP IP6 IR 6 Bullet C amera
Users Manual
Copyright © EverFocus Electronics . Corp
Release Date: September, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depend on the product and software version. Information ing
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1
1. Introduction
EverFocus eZ.HD series cameras – EZA 1540 is equipped with a 5MP SONY
STARVIS CMOS sensor. The model provides 3.6mm fixed lens with ICR. Featured
with T-True Wide Dynamic Range ( WDR), the camera can provide clear images
even under backlight circumstances where intensity of illumination can vary
excessively. The EZA s 1540 support both NTSC and PAL scanning systems and is
IP66 certified.
1.1 Packing List
Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1
Screw & Screw Anchor x 3
User Manual x 1
1.2 Features
Equipped with SONY STARVIS 5MP CMOS sensor
3.6mm fixed lens with ICR to capture the desired field of view
Extended IR range of up to 25m / 82ft. with 20 LEDs (depends on scene IR
reflectivity)
T-WDR to improve the visibility under high contrast scene
The flexible angle viewing with its 3 Axis rotation design allows wall or -
ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings from DVR end
1.3 Dimensions
70mm / 2.76"
157mm / 6.18" 66mm / 2.6"
2
1.4 Optional Accessory
BA- 1E3 0
Color / Material: White / Metal
Size (Φ x H): 101 x 52mm / 3.98”x 2”
Weight: 540g / 1.2lb
1.5 Cable Description
12VDC Power Cable
Video Output Cable (BNC, 75Ohm)
2. Installation
1. Stick the supplied Mounting Sticker 3 to the surface to mark the screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw Anchors
into the screw holes. If you want to run the cable through the surface, drill a
hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the surface
using the supplied 3 Screws.
Mounting
Surface
Screws Screw Anchors
Camera Base
3. 12VDC Connect the Power Cable a to power source. Connect the Video
Output Cable a to monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings.
Remove the Protection Cap from the Joystick before using it.


Product specificaties

Merk: EverFocus
Categorie: Bewakingscamera
Model: EZA1540

Heb je hulp nodig?

Als je hulp nodig hebt met EverFocus EZA1540 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera EverFocus

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera