EverFocus EZ610/MVB Handleiding

EverFocus Bewakingscamera EZ610/MVB

Lees hieronder de 📖 handleiding in het Nederlandse voor EverFocus EZ610/MVB (32 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Installation / Operation Instructions

EverFocus

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N

P/N: 4605XZ0610001AR

Operation Instruction

Please read this manual first for correct installation and operation. This manual should be retained for

future reference. The information in this manual was current when published. The manufacturer reserves

the right to revise and improve its products. All specifications are therefore subject to change without

notice.

any form or by any means without written permission of the EverFocus Electronics Corporation.

Precautions

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and

audio speakers since the electromagnetic fields generated from these devices may distort the

video image.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein.

Improper disassembly or introduction of corrosive materials may result in equipment failure or

other damage.

3. Try and avoid facing the camera toward the sun.

In some circumstances, direct sunlight or may cause permanent damage to the sensor and/or

internal circuits.

4. Keep the power cord away from water and other liquids and never touch the power cord with

wet hands.

Touching a wet power cord with hands or touching the power cord with wet hands may result in

electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove

any dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean

the sensor and the camera lens. Please do not use complex solvents, corrosive or abrasive

agents for cleaning.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings.

Use the camera at temperatures within -40°C ~ 50°C (-40°F~122°F) and in an IP66 complaint

environment; this device is not rated as submersible. The input power source is 12VDC/24VAC.

Product specificaties

Merk:	EverFocus
Categorie:	Bewakingscamera
Model:	EZ610/MVB
Kleur van het product:	Zilver
Gewicht:	1250 g
Breedte:	316.2 mm
Diepte:	105.5 mm
Hoogte:	82.5 mm
Soort:	IP-beveiligingscamera
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP66
Vormfactor:	Doos
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Muur
Maximum resolutie:	768 x 494 Pixels
Stroomuitvoer (volt):	+12V, +12V2
Minimale belichting:	0.05 Lux
Meegeleverde kabels:	BNC
Nachtvisie:	Ja
Brandpuntbereik:	2.8 - 10 mm
Certificering:	CE/FCC
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CCD
Digitale zoom:	32 x
Optische zoom:	- x
Camera sluitertijd:	1/100000 s
Interface:	BNC
Witbalans:	Auto
Type camerasluiter:	Elektronisch
IP-adresfilter:	Ja
Signaal/ruis-verhouding:	52 dB
Aantal TV lijnen:	560
Dag/nacht modus:	Ja
Alarm ingang/uitgang:	Ja
Stroomverbruik (typisch):	6 W
Bedrijfstemperatuur (T-T):	-40 - 50 °C
RS-485 ports:	1
F-nummer (relatieve aperture):	1.2
NTSC resoluties:	768 x 494 Pixels
PAL resoluties:	752 x 582 Pixels