EverFocus EQ200E Handleiding

EverFocus Bewakingscamera EQ200E

Lees hieronder de 📖 handleiding in het Nederlandse voor EverFocus EQ200E (12 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 98 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Operation Instruction

Volume

EverFocus

Operation Instruction

Please read this manual first for correct installation and operation. This manual should be retained for

future reference. The information in this manual was current when published. The manufacturer

reserves the right to revise and improve its products. All specifications are therefore subject to change

without notice.

by any means without written permission of the EverFocus Electronics Corporation.

Precautions

1. Do not place any object on top of the cover.

2. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to

prevent any damages to it. Do not disassemble it or place it on an unstable base.

3. Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio

speakers because the magnetic fields generate from above devices will distort the video image.

4. Install the camera away from stoves, or other heat generating devices as the high temperature

could cause deformation, discoloration or other damages of the camera. Install the camera at

where the temperature range will stay between 0°C to 50°C (32°F to 122°F).

5. Never aim the camera at the sun or other extremely bright objects whether it is in use or not.

6. Do not touch the surface of CCD sensor by hand directly. Use a soft cloth to remove the dirt

from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the

CCD sensor and the camera lens. When the camera is not in use, put the cover cap on the lens

mount.

7. All warnings on the products and in the operating instructions should be adhered to.

8. Do not use attachments not recommended by the appliance manufacturer as they may cause

hazards.

9. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will

be abused by persons walking on it.

10. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

11. Never push objects of any kind into his appliance through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in fire or electric shock.

12. Refer all work related to the installation of this product to qualified service personnel or system

installers.

Federal Communication Commission Interference

Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Product specificaties

Merk:	EverFocus
Categorie:	Bewakingscamera
Model:	EQ200E
Kleur van het product:	Grijs
Gewicht:	250 g
Breedte:	128 mm
Diepte:	58 mm
Hoogte:	55 mm
Gebruikershandleiding:	Ja
Vormfactor:	Doos
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond/muur
Maximum resolutie:	510 x 492 Pixels
Stroomuitvoer (volt):	+12V2
Minimale belichting:	0.3 Lux
Meegeleverde kabels:	BNC
Nachtvisie:	Ja
LED-type:	IR
Certificering:	FCC/CE
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CCD
Optische zoom:	- x
Camera sluitertijd:	1/100000 s
Interface:	BNC
Witbalans:	Auto
Type camerasluiter:	Elektronisch
Audio-uitgang:	1
Maximaal 30 frames per seconde:	60 fps
Signaal/ruis-verhouding:	48 dB
Aantal TV lijnen:	380
Dag/nacht modus:	Ja
Alarm ingang/uitgang:	Ja
AC-ingangsspanning:	240 V
Stroomverbruik (typisch):	2.2 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
F-nummer (relatieve aperture):	1.2
NTSC resoluties:	510 x 492 Pixels
PAL resoluties:	500 x 582 Pixels