Empisal S4D Handleiding

Empisal Naaimachine S4D

Lees hieronder de 📖 handleiding in het Nederlandse voor Empisal S4D (32 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

MODEL: S4D

INSTRUCTION MANUAL

EMPISAL COMPLETE FREE ARM OVER LOCKER

your creative assistant

- 1 -

Safety instructions

Like any other electrical device, a overlock

machine can cause serious, even

life-threatening injuries.To avoid this, and in

order to work safely:

• Before initial use of your overlock machine,

read these operating instructions thoroughly.

• Keep the operating instructions in a suitable

place near the machine. When passing the

appliance on to others, always enclose the

operating instructions.

• Always disconnect the power supply when

leaving the machine unattended. This will

prevent the risk of accidents if the machine is

switched on accidentally.

• First pull the power plug before changing the

bulb or performing maintenance work on the

machine.

This will prevent possibly life-threatening

electric shocks.

• Do not remove the plug from the socket by

pulling on the cable. Always grip the plug and

not the cable when pulling out the power

plug.

• Only use the overlock machine in dry rooms.

• In case of any visible damage on the

machine, the foot switch or the power cable:

Have the damage repaired by Customer

Service before using the overlock machine

again.

• Never let children or elderly persons handle

the machine unsupervised because they may

not properly appreciate the possible dangers.

Keep electrical appliances outside the reach

of children.

• Never use the machine when the ventilation

apertures are blocked. Keep the ventilation

apertures of the machine and the foot switch

free from fluff, dust and waste material.

• This machine is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the machine

Warning

against injuries and

material damages:

According to legislation, you as the user of an

electrical appliance are responsible for preventing

possible accidents through safety-conscious

behaviour:

• Keep your work space tidy. An untidy workplace

can lead to accidents.

• Provide adequate lightingwhen working!

• Do not wear loose clothing or jewellery,as these

can be caught in the moving parts. You should

also wear a hair net if you have long hair.

• Avoid abnormal posture. Remain steady and in

a well-balanced position at all times.

• Be alert! Pay attention to what you are doing.

Always take a rational approach to your work.

Never work with the overlock machine if you are

unable to concentrate or if you are feeling

unwell!

If accidents occur as a result of handling the

machine with insufficient care, or failure to follow

the safety instructions in this manual, then the

manufacturer cannot accept liability.

If the supply cord that fixed with foot controller is

damaged, it must be replaced by the

manufacturer or its service agent or a similar

qualified person in order to avoid a hazard.

Please use for your overlock machine the

ZHEJIANG FOUNDER presser foot, type

KD-2902.

Power rating: 220 - 230V ~ , 50Hz

Current rating: 1.0A

Protection Class : II

- 2 -

INTRODUCTION

THANK YOU FOR CHOOSING OUR OVERLOCK MACHINE

This overlock machine can stitch dependable seams on all kinds of fabric, both light and heavy,

including cotton, wool, rayon, tricot, jersey, and knits.

You do not need a special table for this portable machine.

We suggest that you read this instruction manual carefully before you start to operate the machine.

FOR YOUR SAFETY

1. Keep your eyes on the needles when operating the overlock machine. Do not touch the

handwheel, the cutter or the needles when the machine is running.

2. Turn off the power switch, and pull out the plug from electric socket in the following cases:

＊ When you have finished your sewing.

＊ When you leave the serger temporarily.

＊ When replacing the parts.

＊ When cleaning and adjusting the machine.

BEFORE YOU USE

1. Wipe dust and oil off the machine to avoid any stains on the sewing materials.

2. Test sew by using the same sewing materials you intend to sew.

3. Read this instruction manual thoroughly before replacing the cutters and the needles. Follow the

instructions for correct replacements and adjustments.

Product specificaties

Merk:	Empisal
Categorie:	Naaimachine
Model:	S4D

Heb je hulp nodig?

Als je hulp nodig hebt met Empisal S4D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Naaimachine Empisal

Empisal 760C Handleiding

16 Juli 2024

Empisal EMSM12 Handleiding

15 Juli 2024

Empisal EEMC220 Handleiding

15 Juli 2024

Empisal Dress Maker 120A Handleiding

3 April 2024

Empisal Companion 500D Handleiding

3 April 2024

Empisal Companion 303E Handleiding

3 April 2024

Empisal Expression 889 Handleiding

3 April 2024

Empisal EECM9900 Handleiding

2 September 2023

Empisal 406E Handleiding

2 September 2023

Empisal 303E Handleiding

2 September 2023

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine

Brother CE1155 Handleiding

11 November 2024

Singer HD6335M Handleiding

25 Oktober 2024

Ambiano GT-SF-MSM-01 Handleiding

21 Oktober 2024

Medion LIFE SM70 (MD 11179) Handleiding

25 September 2024

Husqvarna-Viking 120 Handleiding

28 Augustus 2024

Husqvarna-Viking Classica 90 Handleiding

28 Augustus 2024

Husqvarna-Viking 105 Handleiding

28 Augustus 2024

Husqvarna-Viking Designer Ruby 90 Handleiding

28 Augustus 2024

Husqvarna-Viking Huskystar EM10 Handleiding

28 Augustus 2024

Husqvarna-Viking Mega Quilter Handleiding

28 Augustus 2024