Empisal Companion 7D Handleiding

Empisal Naaimachine Companion 7D

Lees hieronder de 📖 handleiding in het Nederlandse voor Empisal Companion 7D (32 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
MODEL: COMPANION-7D
INSTRUCTION MANUAL
EMPISAL COMPLETE FREE ARM OVER LOCKER
your creative assistant
- 1 -
Safety instructions
Like any other electrical device, a overlock
machine can cause serious, even
life-threatening injuries.To avoid this, and in
order to work safely:
• Before initial use of your overlock machine,
read these operating instructions thoroughly.
• Keep the operating instructions in a suitable
place near the machine. When passing the
appliance on to others, always enclose the
operating instructions.
Always disconnect the power supply when
leaving the machine unattended. This will
prevent the risk of accidents if the machine is
switched on accidentally.
• First pull the power plug before changing the
bulb or performing maintenance work on the
machine.
This will prevent possibly life-threatening
electric shocks.
• Do not remove the plug from the socket by
pulling on the cable. Always grip the plug and
not the cable when pulling out the power
plug.
• Only use the overlock machine in dry rooms.
• In case of any visible damage on the
machine, the foot switch or the power cable:
Have the damage repaired by Customer
Service before using the overlock machine
again.
• Never let children or elderly persons handle
the machine unsupervised because they may
not properly appreciate the possible dangers.
Keep electrical appliances outside the reach
of children.
• Never use the machine when the ventilation
apertures are blocked. Keep the ventilation
apertures of the machine and the foot switch
free from fluff, dust and waste material.
This machine is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the machine
Warning
against injuries and
material damages:
According to legislation, you as the user of an
electrical appliance are responsible for preventing
possible accidents through safety-conscious
behaviour:
• Keep your work space tidy. An untidy workplace
can lead to accidents.
• Provide adequate lightingwhen working!
• Do not wear loose clothing or jewellery,as these
can be caught in the moving parts. You should
also wear a hair net if you have long hair.
Avoid abnormal posture. Remain steady and in
a well-balanced position at all times.
• Be alert! Pay attention to what you are doing.
Always take a rational approach to your work.
Never work with the overlock machine if you are
unable to concentrate or if you are feeling
unwell!
If accidents occur as a result of handling the
machine with insufficient care, or failure to follow
the safety instructions in this manual, then the
manufacturer cannot accept liability.
If the supply cord that fixed with foot controller is
damaged, it must be replaced by the
manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
Please use for your overlock machine the
ZHEJIANG FOUNDER presser foot, type
KD-2902.
Power rating: 220 - 230V ~ , 50Hz
Current rating: 1.0A
Protection Class : II
- 2 -
INTRODUCTION
THANK YOU FOR CHOOSING OUR OVERLOCK MACHINE
This overlock machine can stitch dependable seams on all kinds of fabric, both light and heavy,
including cotton, wool, rayon, tricot, jersey, and knits.
You do not need a special table for this portable machine.
We suggest that you read this instruction manual carefully before you start to operate the machine.
FOR YOUR SAFETY
1. Keep your eyes on the needles when operating the overlock machine. Do not touch the hand
wheel, the cutter or the needles when the machine is running.
2. Turn off the power switch, and pull out the plug from electric socket in the following cases:
When you have finished your sewing.
When you leave the serger temporarily.
When replacing the parts.
When cleaning and adjusting the machine.
BEFORE USE
1. Wipe dust and oil off the machine to avoid any stains on the sewing materials.
2. Test sew by using the same sewing materials you intend to sew.
3. Read this instruction manual thoroughly before replacing the cutters and the needles. Follow the
instructions for correct replacements and adjustments.


Product specificaties

Merk: Empisal
Categorie: Naaimachine
Model: Companion 7D

Heb je hulp nodig?

Als je hulp nodig hebt met Empisal Companion 7D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Empisal

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine