Elite Screens SableFrame ER85WH1W-A1080P2 Handleiding

Elite Screens Projectiescherm SableFrame ER85WH1W-A1080P2

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens SableFrame ER85WH1W-A1080P2 (7 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

R - ev.041014 JA www.elitescreens.com 1

ezFrame &

Sable Frame Series

Fixed&Frame&Projection&Screen&

User’s&Guide&

Hardware and Parts List

1. Frame Parts x 6 pcs (4 top horizontal vertical /bottom frame pcs + 2 side frame pcs)

2. Tension Rods x 6 pcs (4 top/bottom rods + 2 side rods)

3 . Screen Material x 1 pc

4 . Center joints x 2 pcs

5. Elbow Joints x 4 pcs

6. Wall brackets x – 3 2 pcs (depending on model/size)

7 . M5x50 wood screws x 6 pcs

8. Hollow wall anchor x 6 pcs

9 . M5x15 screws x 16 pcs

10. Center Support Bar x 1 2 pcs (dep– ending on model/size)

11 – . Support joiner x 2 4 pcs (depending on model/size)

12 – . Fix Plates x 60 180 pcs (depending on model/size)

Note: Please make sure all parts are included in your package before proceeding to assemble your Elite

Screens fixed frame projection screen.

FRAME ASSEMBLY

1. Insert the center joint connector into to one of the 1/2 horizontal frames and fasten it with two M5x15 screws.

bevel connection

½ Horizontal Frame

M5×15 screws

R - ev.041014 JA www.elitescreens.com 2

Push

Short frame

2. Insert the other 1/2 horizontal frame piece to the center joint connector and fasten it with two M5x15 screws.

Repeat steps 1 and 2 for assembling the second horizontal frame.

Note : a. 2 long frames should be assembled for a screen.

b. not until all frame pieces have been Do tighten the screws completely assembled correctly.

3. Insert both elbow joint connectors into the long horizontal frame and then fasten it with two M5x15 screws (see

F . Tig.1) hen insert the vertical short frames fig.1.2and fasten them with screws ( )

bevel connection

½ Long Frame

Push

Horizontal Long Frame

M5×15 screws

Screw

(F ig.1.1)

Push Push

Joint

Long frame

( fig.1)

(F ) ig.1.2

R - ev.041014 JA www.elitescreens.com 3

Push

( fig.2)

Insert the exposed ends of the joint connectors

into the short (vertical) frame and align the four

corners so that they meet at perfect right angles

Tension Rod (Horizontal) x 4

Tension Rod (Vertical) x 2

4. Join&all&four&frame&parts&together&following&the&steps&shown&below.&!"#$%&'&

( ( ( ( )*+,-(./,0(122,345,67(85,12,(892/(2#395+10,*925:(+/,(+;*(,062(*<(+/,(5*0$(<=13,2%&

Attaching the screen material to the frame

1. Unroll the screen material and lay it down on a clean surface. Then insert the tension rod s separately into the

edge all four corners of the materials of (see fig.3)

M5×15 screws

( Fig. 3)

Screen Material

push

Tension&Rod&(Horizontal)&x&4&

push

Tension&Rod&(Vertical)&x&2&

Screw

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	SableFrame ER85WH1W-A1080P2
Kleur van het product:	Black, White
Gewicht:	10000 g
Breedte:	2105.7 mm
Diepte:	40.6 mm
Hoogte:	965.2 mm
Oorspronkelijke beeldverhouding:	2.35:1
Montagewijze:	Muur
Materiaal:	Aluminium, PVC
Op afstand bedienbaar:	Nee
Kijkhoek:	160 °
Zichtbare schermhoogte (h):	845.8 mm
Zichtbare schermbreedte (b):	1986.3 mm
Diagonaal:	85 "
Type aandrijving:	Handmatig
Totale grootte van het scherm (hoogte x breedte):	965.2 x 2105.7 cm
Formaat:	Groothoek
Grenzen:	61 mm
Schermgain:	1.1