Elite Screens Home2 HOME135IWS2 Handleiding

Elite Screens Projectiescherm Home2 HOME135IWS2

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens Home2 HOME135IWS2 (9 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
Rev.010412-AS
www.elitescreens.com info@elitescreens.com
Electric Motorized Projection Screen
Home 2 Series
User’s Guide
2
Rev.010412-AS
www.elitescreens.com info@elitescreens.com
Make sure to read this user’s guide and follow the procedure below.
Cauon: The Screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved
changes or modicaons (except for cung the power cord for hardwire installaons) to this unit are
prohibited and will void your warranty. For more informaon, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
Please retain this user’s guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not
recommended by the manufacturer.
Handle the unit carefully during transportaon to avoid any damages.
To ensure safe and reliable operaon, direct connecon to a properly grounded power
source is advised.
The power outlet supplying power to the unit should be close to the unit and easily
accessible.
Do not install the unit on uneven or inclined surfaces.
Do not place any heavy objects over the power cord.
Posion the power cord properly to avoid creang a trip obstacle.
To avoid an electrical shock or re, due to a loose contact or short circuit, do not
overload the power cord.
The internal & external parts of this unit are not end user serviceable. Do not aempt to
disassemble this unit by yourself. No one except authorized technicians can open and
make repairs to this unit.
Make sure the power source that this unit is connected to has a connuous power ow.
If there is need to use an extension cord, make sure the cord has an equal rang as the
appliance to avoid over heat.
Do not handle the power plug when your hands are wet or your feet are in contact with
water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the condions of heavy rain, wind thunder or
lightning.
Avoid direct sun light, rain shower and moisture.
Keep away from re sources and high temperature to prevent this device from
overheang.
Cut o the power supply rst before transportaon or maintenance.
To avoid possible injury and/or an electric shock, do not aempt to use this screen if
there is obvious damage or if there are any evident broken parts.
Important Safety & Warning Precautions
3
Rev.010412-AS
www.elitescreens.com info@elitescreens.com
Due to various installaon environments, the instrucons provided in this user’s guide are for
reference only. Please consult a professional installaon company for further installaon and
safety advice. The installer must insure that proper mounng hardware is used to provide
adequate strength suitable for the installaon. Elite Screens is not liable for any faulty
installaons. For limit adjustment instrucons, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
The Screen’s Top Black Drop is already set to its maximum drop distance. There is extra top black NO
drop in the roller. Please be aware of this as it will void the limitaon of your warranty.
Individual modicaons to this product are prohibited and will void the warranty with the
manufacturer. Please contact Elite Screens Customer Service for any quesons.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates and can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that the interference will not occur on a parcular installaon. If this
equipment causes harmful interference to radio or television recepon, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separaon between the screen and the device’s receiver.
Connect the equipment into a dierent power outlet other than the device.
1. Carefully unpack the screen.
2. Always handle the screen in a leveled posion on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with
foreign parcles such as dust, sawdust, and/or liquids.
Regardless of the mounng method, the screen should be securely supported so that the vibraon or
pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure
that the fasteners used are of adequate strength and suitable for the installaon locaon.
Installation Warning
Pre-Installation
NOTE


Product specificaties

Merk: Elite Screens
Categorie: Projectiescherm
Model: Home2 HOME135IWS2
Kleur van het product: Wit
Gewicht: - g
Oorspronkelijke beeldverhouding: 1:1
Zichtbare schermhoogte (h): 2425 mm
Zichtbare schermbreedte (b): 2425 mm
Diagonaal: 135 "
Totale grootte van het scherm (hoogte x breedte): - cm
Schermgain: 1.1

Heb je hulp nodig?

Als je hulp nodig hebt met Elite Screens Home2 HOME135IWS2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projectiescherm Elite Screens

Handleiding Projectiescherm

Nieuwste handleidingen voor Projectiescherm