Elite Screens ezFrame R106H Handleiding

Elite Screens Projectiescherm ezFrame R106H

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens ezFrame R106H (3 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Insta- 2 Screen Series RP

Self Adhesive Rear Projecon Screen Film-

Installation Guide

PRECAUTIONS

1. This product is an adhesive rear-projecon screen that can be applied to various surfaces such

as transparent glass or acrylic.

2. This product is made for a one-me applicaon. It has a non-reusable adhesive that bonds

rmly to a window surface. If the window has any layer treatment such as nng, it is likely

that the layering will be damaged upon removal of the screen.

3. To ensure an even and “bubble free” installaon, make sure that the window surface is clean -

and evenly moistened previous to installaon.

4. Do not fold the Insta-RP2 Screen’s material. Folding will result in a permanent crease that

cannot be removed.

5. Avoid touching the screen with any hard or sharp objects that may cut, scratch or otherwise

deface the material.

6. The Insta- 2 Screen is applied to a moist surface. This can impact the installaon of the RP

material by possibly creang slight ripples or bubbling. These will disappear within the rst few

weeks as the micro-droplets of water trapped in the adhesive evaporate.

Contents of this package Pad

Please make sure that all parts listed below are included. Contact Elite Screens Immediately if anything is

missing.

a . b .

Parts List

QTY

a. 2 Insta-RP Screen Material

b. Microfiber cleaning cloth

Installation

1. Use a spray bole lled with water and a mild detergent (1:1000 rao column)

2. Thoroughly clean the glass surface using the correct glass cleaning equipment-

3. Make sure that the glass surface is smooth (unblemished) and perfectly at.

4. Cut the screen to t the required size of the product

5. Parally separate the lm from the screen’s adhesive backing.

(*Tip, it is easier to apply the screen while separang the lm from the adhesive at the same

me. This keeps the material from scking together or going on unevenly)

6. Spray applicators are ideal to evenly spread the moisture before aaching the screen material

to the glass.

7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is

level with no bubbles or ripples present.

8. Now that the material is perfectly at, make sure that it is properly aligned .

9. Use of a leveling brush or scraper will eliminate the residual moisture and make sure that the

material has been applied properly.

10. Allow material to stand unused for 2 to 3 hours to allow the adhesive to bond and set.

For a local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	ezFrame R106H
Kleur van het product:	Wit
Gewicht:	- g
Oorspronkelijke beeldverhouding:	16:9
Zichtbare schermhoogte (h):	2341.9 mm
Zichtbare schermbreedte (b):	1318.3 mm
Diagonaal:	106 "
Totale grootte van het scherm (hoogte x breedte):	132 x 234 cm