Elite Screens Evanesce IHOME90HW2-E24 Handleiding

Elite Screens Projectiescherm Evanesce IHOME90HW2-E24

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens Evanesce IHOME90HW2-E24 (9 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

Rev.021918- 1 DR www.elitescreens.com

In-Ceiling Electric Motorized Front Projection Screen

Evanesce Series

User’s Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedure below.s

Caution: The screen material’s Black Top Masking Border s already set to its maximum drop i level.

Beyond this, there is NO extra black masking on the roller at the top of the screen. Please be aware of this

as dropping the material off the roller will void your warranty with Elite Screens. Unapproved

alterations/modifications to this unit (except for splicing the power cord into hardwire installations) are

prohibited and will void your warranty. For more information, please contact our Technical Support also

Department at (877) 511- 1211 Ext. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the Evanesce screen, do not use it with any accessories not authorized by

the manufacturer.

• Handle the unit carefully during transportation to avoid any shipping screen damages.

• To ensure safe and reliable operation, a direct connection with a properly grounded power

source is advised.

• The power outlet supplying power to the Evanesce screen should be close to the unit and easily

accessible.

• Do not install the screen uneven or inclined into ceilings.

• To avoid an electric shock or a short circuit, do not expose the screen to dampness.

• Do not place any heavy objects on top power cord. of the

• Position the power cord in compliance with IEC/NEC electrical codes and local building codes.

• Never overload the power cord. Always make sure that the contact is firm to a suitable, constant

power source.

• The internal & external parts of the Evanesce screen are not to be modified or tampered with by

end users. Only an authorized technician should open the metal casing or attempt repairs.

• If there is a need to use an extension cord, make sure the cord has an equal rating. Consult NEC

guidelines for more information.

• Use properly insulated electrician’s clothing/equipment during any installation of electronics.

Do not handle the power plug your hands are wet or your feet are in contact with water. if

• When product reaches the end of its operational lifespan, properly dispose of this product in

accordance with the environmental regulations of your . local area

This Product is Designed for

Integrators

This user manual is written for the

comprehension of licensed

professional installers/integrators

experienced in building and electrical

wiring codes.

DIY “do - -it yourself” enthusiasts

should consult a professional for

assistance

Rev.021918- 2 DR www.elitescreens.com

Do not use this unit under the following circumstances.

• If the product is in direct contact with water, soil, rain, weather, or moisture.

• Avoid direct sunlight on the product. UV radiation damages synthetic materials with prolonged

exposure.

• Keep away from fire and other sources and high temperature.

• Disconnect the power supply first before transporting or maintenance.

• To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is any

indication that the product is damaged.

Installation Warning

T he instructions provided within this user’s guide are for reference only. Please consult a

professional for further installation and safety advice. The installer must insure that installer

proper mounting hardware is used to provide adequate strength suitable for the installation. Elite

Screens is not liable for any faulty installations. For limit adjustment instructions, please contact

our Technical Support Department at (877) 511-1211 Ext. 604

The Screen’s is already set tTop Black Drop o its maximum drop distance. There is NO extra top black

drop in the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the manufacturer.

Please contact Elite Screens Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communicati ons.

However, there is no guarantee that the interference will not occur on a particular installation. If this

equipment causes harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures.

 Reorient or relocate the receiving antenna of the device which may be casing the

interference.

 Increase the separation between the screen and the device’s receiver.

 Connect the equipment into a different power outlet other than the device.

Pre- Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign

particles such as dust, sawdust, and/or liquids.

NOTE

Regardless of the mounting method, the screen should be securely supported so that the vibration or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure

the fasteners that are used are of adequate strength and suitable for the installation location.

Rev.021918- 3 DR www.elitescreens.com

Evanesce Series| Controls and Accessories

A. IR Remote

B. RF Remote

C. Wall switch control box

D. 5- 12 volt trigger cable

E. IR extended “eye” receiver

F. Wireless 5-12v (3.5 mm)

mono trigger cable

G. AAA batteries

H. Bubble leveler

Screen operation

Electric Current: Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage.

1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power

outlet.

2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.

6 ways to control your Evanesce

1. IR remote control ( ): The Infrared functions by direct line Item A, Fig 1

of sight contact with a beam range of 30 feet. Aim the IR remote at the

“eye” receiver once it has been connected to the control box’s RJ45 port.

2. IR “Eye” Receiver (Item E, Fig 2): The IR “Eye” Receiver plugs

directly into the control box’s RJ45 port to present a low profile line-of-

sight control option for your IR remote control even in a recessed ceiling

installation.

3. RF Remote Control (Item B): The radio waves eliminate the need for a

direct line of sight with a range of 100 feet.

4. 3-Way Wall Switch (Item C, Fig 3): -The 3 way wall switch is a wall

mount switch with an up/stop/down button and plugs directly into the

control box’s RJ45 port.

Fig.3

STOP

DOWN

Fig.1

IR/RF remote

IR “eye” receiver

Fig.2

3 Way Wall Switch

(does not have IR sensor)

Control box

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	Evanesce IHOME90HW2-E24
Kleur van het product:	Black, White
Gewicht:	- g
Breedte:	2241 mm
Diepte:	150 mm
Hoogte:	2834 mm
Oorspronkelijke beeldverhouding:	16:9
Montagewijze:	Muur
Kleur behuizing:	Wit
Materiaal:	Metal, PVC
Op afstand bedienbaar:	Ja
Kijkhoek:	160 °
Afstandsbediening inbegrepen:	Ja
Zichtbare schermhoogte (h):	1120.1 mm
Zichtbare schermbreedte (b):	1993.9 mm
Diagonaal:	90 "
Type aandrijving:	Gemotoriseerd
Totale grootte van het scherm (hoogte x breedte):	- cm
Formaat:	HDTV
Grenzen:	76.2 mm
Schermgain:	1.1