Elite Screens Electric106X Handleiding

Elite Screens Projectiescherm Electric106X

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens Electric106X (4 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Rev. BR030218 www.elitescreens.com 1

Spectrum Series

Electric/Motorized Projection Screen

User Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedure below.

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black

Top Drop in the roller. Please be aware of this, as it will void your warranty with Elite Screens. Unapproved

changes or modifications (except for cutting the power cord for hardwire installations) to this unit are

prohibited and will void your warranty. For more information, please contact our Technical Support

Department at (877) 511-1211 Ext. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, direct connection to a properly gr ounded power source is advised.

• The power outlet supplying power to the unit should be close to the unit and easily accessible.

• Do not install the unit on uneven or inclined surfaces.

• Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.

• Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.

• There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one

except authorized technicians can open and make repairs to this unit.

• Make sure the power source this unit is connected to has a continuous power flow.

• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid

overheat.

• Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

• Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

• Avoid direct Sunshine, rain shower and moisture.

• Keep away from fire sources and high temperature to prevent this device from overheating.

• Cut off the power supply first before transportation or maintenance.

• Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be done

with any other electric household appliance.

• To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage

or if there are any evident broken parts.

Rev. BR030218 www.elitescreens.com 2

Installation Warning

Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please

contact Elite Screens Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this equipment causes

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures.

 Reorient or relocate the receiving antenna of the device which may be casing the interference.

 Increase the separation between the screen and the device’s receiver.

 Connect the equipment into a different power outlet other than the device

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such

as dust, sawdust, and/or liquids.

Accessories List

A. IR remote x 1

B. 3-way wall

switch x 1

C. 12-volt trigger

cable x 1

D. Bubble level x 1

E. AAA batteries x 2

Rev. BR030218 www.elitescreens.com 3

Control System

1. 5-12V Trigger: The built- -12V trigger input in 5

allows your screen to synchronize its drop & rise with

the projector’s power cycle. The screen deploys when

the projector powers up and will retract when the

projector powers down. The 5-12 volt adaptor

connects to your projector’s trigger output via a

separate cable that may or may not be provided by the

manufacturer of the projector. The trigger feature will

not work without an output cable from the projector,

but it can be tested by connecting the Red (+) and

Green ( ) cable to a 9- -volt battery.

3- prong power cable

RJ- -45 inp ut for 5 12V Trigger

Red: DC 12 +

Green: 0 V -

5-12 Volt Trigger Cable

“Eye”

Receiver

4. IR Remote Control: The Infrared

functions by direct line of sight contact

with a beam range of 30 feet.

5. RF Remote Control: (sold separately)

The radio waves eliminate the need for a direct

line of sight with a range of 150 feet.

2. 3 -Way Wall Switch: The 3-way wall

switch is a wall mount control box with an

up/stop/down button and plugs directly

into the screen’s RJ-45 input.

3. IR “Eye” Receiver: (sold separately) The IR “Eye”

Receiver plugs directly into the screen’s RJ-45 input to

present a low profile line-of-sight control option for your IR

remote control even in a recessed ceiling installation.

Installation Instructions

Please consult a professional installer. Elite Screens is not liable for any faulty installations.

1. Select the installation location for your screen. Ensure that it is within reasonable proximity from your power source.

2. For best support of your screen, it is ideal to secure your screen into the studs of your house’s internal framework. If studs are

not available, use hollow anchors for mounting your wall screws into drywall. If you’re installing in a concrete structure, use

concrete bolts to secure your screen.

Always consult a professional installer or hardware professional to ensure that the proper screws and/or hardware are being used.

3. Ensure that both brackets are in perfect level alignment with one another. Use wall/c iling wood screws to secure to the wood e

studs. Use hollow anchors if mounting in drywall.

4. The screen casing is designed to accept the wall screws directly. If not using the Optional L- Brackets

http://www.elitescreens.com/lbracket1, sure to position the washer between the head of the wall-screw and the anchor slots on be

the screen’s casing.

St op

Do wn

3-way Wall Switch

Note: The IR Remote

MUST be within direct

line of sight to the

sensor to function.

See figure to the left.

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	Electric106X
Kleur van het product:	Zwart
Gewicht:	9500 g
Oorspronkelijke beeldverhouding:	16:10
Zichtbare schermhoogte (h):	143 mm
Zichtbare schermbreedte (b):	228.6 mm
Diagonaal:	106 "
Totale grootte van het scherm (hoogte x breedte):	143 x 228.6 cm
Schermgain:	1.1