Elica Leone ELN136S2 Handleiding

Elica Afzuigkap Leone ELN136S2

Lees hieronder de 📖 handleiding in het Nederlandse voor Elica Leone ELN136S2 (31 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31
Use, Care, and
Installation Guide
Guide
d’utilisation,
d’entretien et
d’installation
Guía de
instalación, uso y
mantenimiento
READ AND SAVE THESE
INSTRUCTIONS
LISEZ CES
INSTRUCTIONS ET
CONSERVEZ-LES
LEA Y CONSERVE
ESTAS INSTRUCCIONES
LIB0152213
Printed in Mexico
10/18
Models: KIT0154387
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
Tools needed
• Drill
1¼” (3 cm) drill bit
³⁄₁₆” (0.5 cm) drill bit
Pencil
Wire stripper or utility knife
Tape measure or ruler
Pliers
Caulking gun and weatherproof caulking compound
Vent clamps
Jigsaw or keyhole saw
Flat-blade screwdriver
Metal snips
Phillips screwdriver
Parts needed
6 - 9 AWG wires, one each of the following colors: black,
white, red, blue, gray, and green or green/yellow (ground)
The length of the conduit and AWG wires is NOTE:
determined by the distance between the in-line blower
motor and range hood terminal boxes.
11 - UL listed wire connectors
Parts supplied
Remove parts from packages. Check that all parts are
included.
Strain relief connector 2
4.2x8 mm screws 6
6-wire blower connector 1
4x1.8 mm flat washers 4
Rectangular bracket - Motor cover
2
Bracket- Connector support
1
6.3x60 mm screws 4
9-wire blower connector 1
Strain Reliefs
Ø Ø 12 mm 15.9 mm
1
6x13.5 mm
2
Torx 20 adapter 1
Torx 10 adapter 1
Strap 2.5x95 mm
2
7
3 For or EVV648S1, EVV636S1 range hood models
you have to remove the spacer and the dip trays before
removing the internal motor blower.
A
BA. Drip trays screws
B. Drip trays
AB
A. Spacer screws
B. Spacer
4 Remove the range hood internal motor blower.
B
A
A. Blower
B. Blower screws
5 Install the rectangular brackets (included in kit) with
screws (4)4.2x8 mm.
6 Install the spacer, dip trays and grease filters.
B
A
A. Rectangular brackets
B. Screws
B. For dual Blower Motor Models (ECL136S4, ECL142S4,
ECL148S4, ELI142S2, ELI136S2, ETR134S1, EAR140S4,
EAR146S4, EAR134S4, ELN136S2, ELN142S2, ELN148S1)
1 Remove the filters, the mounting screws and lock washers.
A
B
A. Screw with locker
washer
B. Mounting Hole
2 For ELN136S2, ELN142S2, ELI136S2, ELI142S2,
EAR134S4 range hood models you have to remove
the blower mounting screws from the top of the hood
housing.
A. Blower screws
A


Product specificaties

Merk: Elica
Categorie: Afzuigkap
Model: Leone ELN136S2

Heb je hulp nodig?

Als je hulp nodig hebt met Elica Leone ELN136S2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afzuigkap Elica

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap