Electro-Voice Xi-1082 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro-Voice Xi-1082 (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
MB1082 Mounting
Bracket Kit Installation
Instructions
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 7/2003
Part Number 535431 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Wall or Ceiling Mounting Instructions
Refer to the Figure and Table below for the following steps:
1. Attach the U-bracket (A) to the wall or ceiling using fasteners that are suitable for the wall or ceiling material (not
supplied).
2. Remove the paper backing from the friction pads (C) and attach these to the U-bracket as shown.
3. Remove the two 3/8-16 bolts from each end of the enclosure.
4. Ensuring that the washer (B) is mounted between the U-bracket and the 3/8-16 screw(s) previously removed from
the enclosure, mount the Xi-1082 to the U-bracket by selecting two of the six avaliable mounting holes on the
bracket.
5. Rotate the speaker so that the input terminal is accessible and attach the wires. Position the speaker for the
desired angle and tighten the screws sufficiently so that the speaker does not inadvertently rotate.
CAUTION:
Due to the weight of the Xi-1082 speaker system, it is imperative that the Xi-1082 bracket be
properly secured to the wall or ceiling. The choice of fastener (not provided with bracket kit)
will be determined by the material and construction of the mounting surface.
met
I .
yt
Q .
oNtraP noitpircseD
A 1 HJ/FJ-02147 thW/klBtekcarB-U
B 2 3504 srehsaW
C 2 02083 sdaPnoitcirF
3/8-16 Screw
from Xi-1082
snoitacificepS
:seloHgnitnuoMgnilieC/lla
W "
04.0,enil-nieerhT retemaid)mm01(
,selohecnaraelc
"8.6decapssretnec
trapa)mm371(
:seloHgnitnuoMerusolcn
E )
mm01("04.0xiS ecnaraelcretemaid
fosdneehtnoseloh
tekcarbeht
:laireta
M l
eetsdellor-toH
:hsini
F r
edwopetihWrokcalB taoc
:)evobaelbatees(deilppuSstra
P n
oitcirF)2(,tekcarb-U srehsaW)2(,sdap
:thgieWte
N )
gk20.1(sbl52.2
:thgieWgnippih
S )
gk74.1(sbl52.3
:srebmuNtra
P )
KLB(4423007 )THW(2043007


Product specificaties

Merk: Electro-Voice
Categorie: Speaker
Model: Xi-1082

Heb je hulp nodig?

Als je hulp nodig hebt met Electro-Voice Xi-1082 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Electro-Voice

Handleiding Speaker

Nieuwste handleidingen voor Speaker