Elac Navis ARF-51 Handleiding

Elac Speaker Navis ARF-51

Lees hieronder de 📖 handleiding in het Nederlandse voor Elac Navis ARF-51 (41 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/41
ARB-51 POWERED BOOKSHELF SPEAKERS
ARF-51 POWERED FLOORSTANDING SPEAKERS OPERATING INSTRUCTIONS
ELAC Navis Speakers | www.elac.com | Page 1
Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the speaker and in the manual. Please check the speaker for damage before
use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
2. Use only as directed
Connect the speaker(s) according to the instructions in the manual.
Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for
levelling the speaker. For levelling on an uneven floor, unscrew the spikes or anti-slip feet by 2-3 turns of
thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not
be compromised by using spikes or anti-slip feet as the speaker may tip-over.
3. Location
Install the speakers on a level surface only
When choosing the location of these speakers do not place them in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues
with a CRT based TV)
Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic
cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability
can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out
carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can be increased
by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any heat sources
such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce heat, or in areas
where there is a risk of explosion.
Do not block any ventilation openings. Install in accordance with the instructions.
Do not install the speaker in a closed rack or in a closed cupboard.
Do not put burning candles on or near the speaker.
Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise
on woofers.
In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may
cause colored imprints on the surfaces.
ELAC Navis Speakers | www.elac.com | Page 2
4. Overload
Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave loudspeakers under extreme overload
conditions unattended.
5. Service
DANGER! Do not open the cabinet because the components and conductors may carry current! Servicing to be
carried out by qualified service personnel only.
Servicing is required when the loudspeaker has been damaged in any way, such as damage to
the power supply cord or the plug, or when liquid has been spilled or objects have fallen onto the
loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been
dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing should be carried
out by qualified service personnel only.
6. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol, benzene,
furniture polish or other agents for cleaning! Modern furniture is often coated with multiple varnishes and
plastics which can be treated with chemical agents. Some of these agents contain substances which degrade or
soften the rubber feet. Therefore we advise that you place an anti-slip mat underneath the loudspeaker(s).
7. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
8. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner. At
end of life do not dispose of the speaker(s) with standard household waste. The speaker must be recycled in
accordance with local legislation. Ask your local government for further information on recycling as the device
contains valuable raw materials. Disable the speaker(s) before disposal.
9. Compliance Information for the Wireless Transmitter
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications
were met. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotopically radiated power is not more than that permitted for successful communication.


Product specificaties

Merk: Elac
Categorie: Speaker
Model: Navis ARF-51

Heb je hulp nodig?

Als je hulp nodig hebt met Elac Navis ARF-51 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Elac

Handleiding Speaker

Nieuwste handleidingen voor Speaker