Elac Debut 2.0 DA42 Handleiding

Elac Speaker Debut 2.0 DA42

Lees hieronder de 📖 handleiding in het Nederlandse voor Elac Debut 2.0 DA42 (29 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
A4.2. DOLBY ENABLED SPEAKERS OPERATING INSTRUCTIONS
ELAC Debut A4.2 Speakers | www.elac.com | Page 1
Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the speaker and in the manual. Please check the speaker for damage before
use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
CAUTION! Subwoofers and active speakers are heavy. Be careful when lifting them to prevent personal
injury.
2. Use only as directed
Connect the speaker(s) according to the instructions in the manual.
Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for
levelling the alignment. They have to be screwed into the thread until thread end. For levelling on an
uneven floor, it is allowed to unscrew the spikes or anti-slip feet by 2-3 turns of thread. The speaker
should always be in perfect vertical alignment. The stability of the speaker must not be compromised by
using spikes or anti-slip feet as the speaker may tip-over.
3. Location
Install the speakers on a level surface only
When choosing the location of these speakers do not place them in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues
with a CRT based TV)
Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic
cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid severe injury from tip-over. Please note, that
stability can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be
carried out carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can
be increased by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any
heat sources such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce
heat, or in areas where there is a risk of explosion.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Don’t install the speaker in a closed rack or in a closed cupboard.
Don’t put burning candles on or near the speaker.
Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise
on woofers.
In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may
cause colored imprints on the surfaces.
ELAC Debut A4.2 Speakers | www.elac.com | Page 2
4. Overload
Extreme overload of the device due to very high volume may cause damage to individual components.
Theoretically, this kind of overload could cause a fire inside the cabinet (although no actual case is
known). Because of the possible danger, you should never leave loudspeakers under extreme overload
conditions unattended.
5. Service
DANGER! Do not open the cabinet because the components and conductors may carry current!
Servicing to be carried out by qualified service personnel only.
Servicing is required when the loudspeaker has been damaged in any way, such as damage to
the power supply cord or the plug, or when liquid has been spilled or objects have fallen onto the
loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been
dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing should be carried
out by qualified service personnel only.
6. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol,
benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple
varnishes and plastics which can be treated with chemical agents. Some of these agents contain
substances which degrade or soften the rubber feet. Therefore we advise that you place an anti-slip mat
underneath the loudspeaker(s).
7. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
8. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of life do not dispose of the speaker(s) with standard household waste. The speaker must be
recycled in accordance with local legislation. Ask your local government for further information on
recycling as the device contains valuable raw materials. Disable the speaker(s) before disposal.


Product specificaties

Merk: Elac
Categorie: Speaker
Model: Debut 2.0 DA42

Heb je hulp nodig?

Als je hulp nodig hebt met Elac Debut 2.0 DA42 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Elac

Handleiding Speaker

Nieuwste handleidingen voor Speaker