Eizo FlexScan EV2730Q Handleiding

Eizo Monitor FlexScan EV2730Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Eizo FlexScan EV2730Q (62 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/62
Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
The latest User’s Manual is available for download from our web site:
http://www.eizoglobal.com
Color LCD Monitor
Users Manual
2
Location of Caution Statement
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
3
Notice for this monitor
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product has been adjusted specically for use in the region to which it was originally shipped. If the
product is used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and
maintain a stable display.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for
extended periods of time.
If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To
maximize the life of the monitor, we recommend the monitor be turned off periodically.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer
to “Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may
appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,
please contact your local EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such
as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage
your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen. The
symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do
not attempt to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the
monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the
monitor.


Product specificaties

Merk: Eizo
Categorie: Monitor
Model: FlexScan EV2730Q
Kleur van het product: Zwart
Gebruikershandleiding: Ja
LED-indicatoren: Ja
Bluetooth: Nee
Aan/uitschakelaar: Ja
In hoogte verstelbaar: Ja
Beeldscherm: LED
Beeldschermdiagonaal: 26.5 "
Resolutie: 1920 x 1920 Pixels
Touchscreen: Nee
Type aansluitplug: 3,5 mm
Ethernet LAN: Nee
Kijkhoek, horizontaal: 178 °
Kijkhoek, verticaal: 178 °
Meegeleverde kabels: DisplayPort, DVI
Geïntegreerde geheugenkaartlezer: Nee
Beeldscherm vorm: Flat
Typische contrastverhouding: 1000:1
DVI-poort: Ja
Bevestigingsmogelijkheid voor kabelslot: Nee
Ingebouwde luidsprekers: Ja
Gemiddeld vermogen: 2 W
Stroomverbruik (in standby): 0.5 W
Vermogensverbruik (max): 64 W
Aantal luidsprekers: 2
Hoofdtelefoonuitgangen: 1
Certificering: CE, TÜV GS, TÜV, ISO 9241-307 Class 1, TCO 6
Beeldscherm, aantal kleuren: 16.78 miljoen kleuren
HDCP: Ja
3D: Nee
Audio-ingangen: Ja
Audio-uitgang: Ja
Display technologie: LED
Responstijd: 5 ms
Pixel pitch: 0.2478 x 0.2478 mm
Ondersteunde grafische resoluties: 720 x 400,1024 x 768 (XGA),1280 x 1024 (SXGA),1920 x 1200 (WUXGA),640 x 480 (VGA),800 x 600 (SVGA)
VESA-montage: Ja
Paneelmontage-interface: 100 x 100 mm
DVI-D poorten: 1
Duurzaamheidscertificaten: EPEAT Gold, ENERGY STAR
Helderheid (typisch): 300 cd/m²
Beeldverhouding: 1:1
Digitale horizontale frequentie: 31 - 127 kHz
Digitale verticale frequentie: 59 - 61 Hz
RGB-kleurruimte: sRGB
Geïntegreerde TV Tuner: Nee
Ingebouwde camera: Nee
Diepte ( zonder voet ): 56 mm
Hoogte (zonder voet ): 501.5 mm
Breedte ( zonder voet ): 497 mm
Gewicht (zonder voet): 4200 g
Voldoet aan industriestandaarden: RoHS
Aantal DisplayPorts: 1
Energieverbruik (HDR) per 1000 uur: - kWu
Energie-efficiëntieklasse (SDR): F
Energieverbruik (SDR) per 1000 uur: 28 kWu
Breedte apparaat (met standaard): 497 mm
Diepte apparaat (met standaard): 245 mm
Hoogte apparaat (met standaard): 613.5 mm
Gewicht (met standaard): 7100 g
AMD FreeSync: Nee
NVIDIA G-SYNC: Nee
Ingebouwde subwoofer: Nee
On Screen Display (OSD): Ja
Aantal On Screen Display-talen: 10
Aantal USB Type-A downstream-poorten: 2
Versie USB-hub: 2.0
Thin client geïnstalleerd: Nee
Soort paneel: IPS
Draaibaar: Ja
Horizontaal draaibaar: -172 - 172 °
Ingebouwde USB-hub: Ja
Grootte beeld (horizontaal): 475.7 mm
Grootte beeld (verticaal): 475.7 mm
Voetenkleur: Zwart
DDC/CI: Ja
Type USB-upstreampoort: USB Type-B
Aantal upstream-poorten: 1
Energiebeheer: Ja
Wifi: Nee
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Stroomverbruik (typisch): 27.5 W
Bedrijfstemperatuur (T-T): 5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 20 - 80 procent
Bereik kantelhoek: -5 - 35 °
Energie-efficiëntieschaal: A tot G
Code geharmoniseerd systeem (HS): 85285210
kantel aanpassingen: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Eizo FlexScan EV2730Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Eizo

Handleiding Monitor

Nieuwste handleidingen voor Monitor