Eizo FDH3601 Handleiding

Eizo Monitor FDH3601

Lees hieronder de 📖 handleiding in het Nederlandse voor Eizo FDH3601 (47 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/47

Important

Please read this User’s Manual, and Setup Manual (separate volume)

carefully to familiarize yourself with safe and effective usage.

• Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizo.com

2

This product has been adjusted specically for use in the region to which it was originally shipped. If operated

outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential

unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.

Although every effort has been made to ensure that this manual provides up-to-date information, please note that

EIZO monitor specications are subject to change without notice.

Noticeforthismonitor

Notice for this monitor

Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suitable

for use with training and developing of air trafc control as well as for the monitoring system of road trafc control.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Power cords provided with the product

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on

the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please contact

your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference

patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure

marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

Product specificaties

Merk:	Eizo
Categorie:	Monitor
Model:	FDH3601
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
In hoogte verstelbaar:	Ja
Beeldscherm:	LED
Beeldschermdiagonaal:	36.4 "
Resolutie:	4096 x 2160 Pixels
Touchscreen:	Nee
Oorspronkelijke beeldverhouding:	16:9
Kijkhoek, horizontaal:	176 °
Kijkhoek, verticaal:	176 °
Meegeleverde kabels:	AC, DisplayPort, DVI, USB
Typische contrastverhouding:	1000:1
Inclusief AC-adapter:	Ja
DVI-poort:	Ja
Bevestigingsmogelijkheid voor kabelslot:	Nee
Ingebouwde luidsprekers:	Nee
Stroomverbruik (in standby):	- W
Vermogensverbruik (max):	350 W
Certificering:	CB, TUV/GS, CE, cTUVus, FCC-B, Canadian ICES-003-B, TUV/S, VCCI-B, C-Tick, RoHS, WEEE
Beeldscherm, aantal kleuren:	1.073 biljoen kleuren
HD type:	4K Ultra HD
3D:	Nee
Responstijd:	8 ms
Pixel pitch:	0.1995 x 0.1995 mm
Ondersteunde grafische resoluties:	4096 x 2160
VESA-montage:	Ja
Paneelmontage-interface:	200 x 200 mm
DVI-D poorten:	2
Helderheid (typisch):	700 cd/m²
Beeldverhouding:	16:9
Digitale horizontale frequentie:	31 - 140 kHz
Digitale verticale frequentie:	47.5 - 61 Hz
Geïntegreerde TV Tuner:	Nee
Ingebouwde camera:	Nee
Diepte ( zonder voet ):	157 mm
Hoogte (zonder voet ):	527 mm
Breedte ( zonder voet ):	896 mm
Gewicht (zonder voet):	23200 g
Aantal DisplayPorts:	2
Breedte apparaat (met standaard):	896 mm
Diepte apparaat (met standaard):	323 mm
Gewicht (met standaard):	27900 g
On Screen Display (OSD):	Ja
Aantal USB Type-A downstream-poorten:	2
Versie USB-hub:	2.0
Stroomverbruik (PowerSave):	6 W
Thin client geïnstalleerd:	Nee
Draaibaar:	Ja
Horizontaal draaibaar:	-172 - 172 °
Grootte beeld (diagonaal):	923 mm
Grootte beeld (horizontaal):	817.1 mm
Grootte beeld (verticaal):	430.9 mm
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Bereik kantelhoek:	0 - 25 °
kantel aanpassingen:	Ja