Durkopp Adler 744-122 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Durkopp Adler 744-122 (8 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Contents Page
Preface and General Safety Notes
Part 1: Operating Instructions Cl. 744-122
1. Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Summary and Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Replacing the Material Guide Rail by Primary Seams . . . . . . . . . . . . . . . . . . . . . 5
2.2 Attaching the Material Stopper by Primary Seams . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Setting the Seam Interval by Primary Seams . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 Needles-Yarn-Thread Tensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5 Inserting the Material and Starting the Sewing Unit . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Thread Monitor for Needle and Bobbin Thread . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 Build-on Stacker by Primary Seams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Home
1. Product Description
1.1_ Summary and Intended Use
The 744-122 sewing unit is for sewing
pre-determined, straight or curved seams. A rail
appropriate to the seam configuration holds and
guides the material.
The material transport is conducted by a step
motor. The sewing unit has electro-pneumatic
controls.
The Microcontrol control units have the integrated
"Multitest" testing and monitoring system. Along
with monitoring the sewing process this allows a
quick checking of the input and output elements.
Possible operating errors and malfunctions are
shown in the display.
Depending on the program, the control of the
sewing unit can occur via photocell or distance
measurement.
Along with continuous seams from seam beginning
to seam end the following additional functions can
be selected with the control unit:
Slit at the beginning of the material
Slit at the end of the material
Slit at the beginning and at the end of the
material
Seam interruption or partial stitch condensing
Seam interruption with slit at the beginning and
at the end of the material
Security at the seam end through chain
stitching or stitch condensing
Through equipment with the appropriate parts sets,
the sewing unit can be used for the following work
procedures:
1. Primary seams: Work procedure A,
e.g. rear sleeve seam, mid-back seam, front
sleeve seam, side piece seam-overcoat, front
sleeve seam with outer material-lining in one
step etc.
2. Sewing waistbands on trousers: work
procedure D
3. Sewing waistbands on skirts: Work procedure E
The selector switch on the back of the control unit
front panel must have a setting appropriate to the
work procedures.
The setting normally occurs at the factory.
Which selector switch setting should be chosen for
which work procedure can be found in the
Microcontrol controls summary in the annex to
these instructions.
Please direct further enquiries concerning work
procedures/applications to
or its offices.
3


Product specificaties

Merk: Durkopp Adler
Categorie: Naaimachine
Model: 744-122

Heb je hulp nodig?

Als je hulp nodig hebt met Durkopp Adler 744-122 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Durkopp Adler

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine