Dual TS10 Handleiding

Dual Speaker TS10

Lees hieronder de 📖 handleiding in het Nederlandse voor Dual TS10 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

INSTALLATION/OWNER'S MANUAL

1" Soft Dome Tweeter

TS10

TS10 PREPARATION

Getting Started

Safety

To prevent injury and damage to the unit, please read and

follow the instructions in this manual.

If you feel unsure about installing this system yourself,

have it installed by a qualified audio technician.

Before installation, disconnect the battery negative (-)

terminal to prevent damage to the unit, fire and/or possible

injury.

Do not connect Amplifier or any audio source to

illumination inputs. Inputs are designed for 12 volt

power source only.

Thank you for purchasing the TS10 1" tweeter. Although Dual has attempted to make

sure all of the information contained within this manual is accurate, please be aware

that any part of it is subject to change without notice.

Placement

The TS10 must be combined with other component speakers to develop a complete

speaker system. A 2-way system is comprised of a midrange and tweeter, while a 3-way

system includes a midrange, tweeter and woofer/subwoofer.

Midranges, like tweeters, are directional and require a similar "line of sight" location. In

addition, a tweeter should be located as close as possible to its corresponding midrange

driver to assure good sound cohesion. Woofer and subwoofer drivers are generally

considered non-directional due to the nature of the low frequencies they produce;

therefore, their placement is less critical. Carefully consider the layout of your entire

system before installing any speaker components.

The TS10 is a high performance tweeter which reproduces the upper portion of the

audible frequency range. As such, it should be mounted in locations which provide a

direct line of sight path to the listener's ear. Ideal locations include dashboard and upper

areas of door and side panels.

The included mounting adapters provided with this kit allow surface, flush or angled

mounting. Experiment with tweeter placement to determine best location before

permenantly mounting tweeters in vehicle.

Amplifier

Output

Black

Red

TS10 INSTALLATION

Mounting

Wiring

Connect the tweeter as shown in the wiring diagram. Improper

connections will cause damage not covered by the product warranty.

Tweeters have been designed for flush,

surface or 30 degree mounting. Flush

mounting, which provides a custom

appearance, requires 1" of clearance behind

mounting surface. If sufficient clearance is not

available, the included mounting kit allows

tweeter to be mounted to the surface of the

vehincle's interior. Tweeters can be mounted

straight or at an angle depending on the

adapter selected.

Connection

The illuminite lighting elements of your TS series products provide you with a unique

custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control

circuitry provides an extraordinary lighted-Hue illumination which allows great creative

opportunities for the beginner and seasoned custom installer alike. The interior of your

vehicle will never sound or look ordinary again. Let your imagination take you there.

The lighting features of all illuminite products require a 12 volt DC power source to

operate. The speaker has two distinct sets of input terminals. The first is labeled audio

input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly

marked with a label positioned directly above the terminal housing. The polarity (+ and -)

indicators for each set of inputs also appear on these labels.

1. Do not connect Amplifier or any audio source to illuminite lighting inputs. Inputs

are designed for switched 12 volt DC power source only.

2. See fig. 1a, (illustrates wiring diagram) be sure to maintain polarity. Be sure to

connect to a constant switched 12 volt DC source. Correct connection would be

the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal

and connect the Negative (-) illuminite lighting input terminal to a good chassis

ground.

Notice: The Illuminite™ series LED illumination elements are not removable. There

are no serviceable parts inside or attached to the speaker assembly. The Illuminite™

series products are sensitive electronic devices. Removal or tampering with any part or

portion of the speaker and/or its assemblies will damage the product and void the limited

warranty.

Product specificaties

Merk:	Dual
Categorie:	Speaker
Model:	TS10
Impedantie:	4 Ohm
Frequentiebereik:	3000 - 20000 Hz
Gevoeligheid:	90 dB
Luidspreker soort:	1-weg
Diameter hogetonenluidspreker:	25.4 mm
Piekvermogen:	100 W
Tweeter:	Ja
Nominaal vermogen:	25 W
Versterker inclusief:	Nee
Tweeter magnet type:	Ferriet