Dormakaba STA 7400 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba STA 7400 (10 pagina's) in de categorie Deurdranger. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
STA 7414/7436 AR/ARJ/ARP
Round arm for regular, top jamb, parallel mount
Stainless steel, corrosion resistant
Installation instructions
08280730 – 03-2021
| | EN
dormakaba 7414/7436 AR/ARJ/ARP Installation Instructions
08280730 03-20217400 Surface Applied Closers
2
1 Instructions
Fig.1
1.1 Overall - installation types
ATTENTION!
Before you begin,
determine installation
type AT, ARJ, or ARP
and hand of door (RH
or LH).
Also, make sure you
have the tools listed
below.
Right hand installation Left hand installation
7414/7436 AR RH
7414/7436 ARJ RH
4” reveal maximium
7414/7436 ARP RH 7414/7436 ARP LH
Tools
Tape, Tape Measure
Center Punch and Hammer
3/16” Slotted Screw Driver
#3 Cross-Point Screw Driver
1/2” Box Wrench
10” Adjustable Wrench
List:
7/32, 5/32, 1/8 Drill Bits and Drill
1/4-20 Tap & Holder
5mm hex wrench
7414/7436 ARJ LH
4” reveal maximium
Caution: sex nuts are required for attachment
of components to unreinforced doors and to
wood or plastic faced composite type fire doors,
unless an alternative method is identified in the
individual door manufacturer’s listings.
When installing main arm attachment observe
directions closely.
Confirm dead stop degree prior to door and
frame preparations.
Make sure door efficiently operates prior to
installing closer.
7414/7436 AR LH
dormakaba 7414/7436 AR/ARJ/ARP Installation Instructions
08280730 03-20217400 Surface Applied Closers 3
. Installing arm STA / AR - Arm round (Regular)/mount pull side
door
Fig.
2
3
Pry apart connecting arm (3)
tube from main arm (2).
12
Thread the connecting tube (3) and
rod shoe (4) together.
5 6
Combo Flat
Head Screw x4
Pan Head
Combo Screw
x2
Standard closing
power foot orientation
shown above, for 15%
more closing power
invert shoe 180
degrees.
Right Hand Left Hand
3A
3
Prepare door and frame using the template
provide in the back of the instructions.
Attach the closer (1) to the door using 4 combo
flat head screws (5).
Attach connecting arm (4) to the frame with 2
combo pan head screws (6).
Attach main arm (2) per hand and secure tightly
with socket head screw (7) see 3A.
Parts list:
No. Description Qty
1) Closer 1
2) Main Arm 1
3) Connecting Arm 1
4) Rod and Shoe 1
5) Flat Head Combo Screws 4
6) Pan Head Combo Screw 2
7) Socket Head Cap Screw 1
8) Dust Cap 1
Right Hand Left Hand


Product specificaties

Merk: Dormakaba
Categorie: Deurdranger
Model: STA 7400

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba STA 7400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden