DoorBird D2101KV Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor DoorBird D2101KV (56 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
VERSION ., MIN. HW .
Installation Manual (Pages 2-14)
IP VIDEO DOOR STATION
D21x Series
Installationsanleitung (Seite 15-28)
IP VIDEO TÜRSTATION
D21x Serie
Manuel d´installation (Page 29-42)
INTERPHONE VIDÉO IP
Série D21x
Manual de Instalación (Página 43-55)
VIDEOPORTERO IP
Serie D21x
2
INSTALLATION MANUAL
Read these instructions carefully before starting to
use any components. Keep the manual so you can
refer to it at a later date if required. If you hand over
the device to other persons for use, please hand over
the operating manual as well.
You can always find the most up-to-date version
of the installation manual on www.doorbird.com/
support
To make things easier we use the term “device” for
the product “IP Video Door Station” and “mobile
device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no compo-
nents that require service by the user. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Symbols used
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Note: Indicates useful information which
helps in getting the most out of the product.
N OT I CE
Important: Indicates significant information
which is essential for the product to function
correctly.
Hazard information
Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
For power supply, only use the original
plug-in mains adapter delivered with the
device or a recommended PoE-Switch/
PoE-Injector as specified in this manual.
Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact
with the circuit board must therefore be
avoided at any time.
Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
Do not use the device if there are signs of
damage to the housing, control elements or
connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained
by the user. In the event of an error, please
have the device checked by an authorized
expert.
For safety, approval and licensing reasons
(CE/FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
The device is not a toy; do not allow
children to play with it. Do not leave packaging
material lying around. Plastic films/bags,
pieces of polystyrene, etc. can be dangerous
in the hands of a child.
Always lay cables in such a way that they
do not become a risk to people and domestic
animals.
WARNING
ENGLISH
3
Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring,
or connection. Electric shock could result.
On devices which are not marked as
weather-proof: Keep the device away from
water or any other liquid.
Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
High voltage may be present internally.
Do not open the device. Electric shock could
result.
The device is not of explosion-proof. Do not
install or use near gases or flammable
materials. Fire or explosion could result.
Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single
power supply to the device.
Do not connect any terminal on the device
to an AC power line. Fire or electric shock
could result.
Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
Do not plug or unplug with wet hands.
Electric shock could result.
Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
Existing wiring such as chime wiring, etc. may
contain high voltage AC electricity. Damage to
the device or electric shock could result.
Wiring and installation must be done by a
qualified eletrician.
When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
WARNING Existing wiring such as chime wiring, etc. may
contain high voltage AC electricity. Damage to
the device or electric shock could result. Wiring
and installation must be done by a qualified
eletrician.
When mounting the device on a wall or ceiling,
install the device in a convenient location, but
not where it could be jarred or bumped. Injury
could result.
On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
Do not put anything on the device or cover the
device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
- Places under direct sunlight or places near
heating equipment that varies in temperature.
- Places subject to dust, oil, chemicals,
hydrogen sulfide (hot spring).
- Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
- Places where the temperature is very low,
such as inside a refrigerated area or in front of
an air conditioner.
- Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
- Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
- Locations subject to frequent vibration or
impact.
On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
If the device does not operate properly, unplug
the power supply.


Product specificaties

Merk: DoorBird
Categorie: Niet gecategoriseerd
Model: D2101KV
Soort bediening: Knoppen
Kleur van het product: Roestvrijstaal
Gewicht: 2040 g
Breedte: 129 mm
Diepte: 49.6 mm
Hoogte: 349.5 mm
Kleur: Ja
Internationale veiligheidscode (IP): IP65
AC-adapter ingangsspanning: 110-240 V
Montage gereedschap: Ja
Beeldschermdiagonaal: - "
Connectiviteitstechnologie: Bedraad
Ondersteunde video-modi: 720p
Kijkhoek, horizontaal: 180 °
Kijkhoek, verticaal: 90 °
Nachtvisie: Ja
LED-type: IR
Luidspreker: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 1
Ingebouwde luidsprekers: Ja
Certificering: CE, IC, FCC
Correct gebruik: Buiten
Ingebouwde microfoon: Ja
Duurzaamheidscertificaten: RoHS
Netwerkstandaard: IEEE 802.3af
Aantal knoppen: 13 knoppen
Backlight toetsen: Ja
Bewegingsdetectie-functie: Ja
Web-gebaseerd management: Ja
Ruisonderdrukkingseffect: Ja
Ophangsysteem voor aan de muur: Ja
Power over Ethernet (PoE): Ja
Buitenunit inbegrepen: Ja
Bewegingssensor: Ja
Aantal verlichtingen LEDS: 12
RFID lezer: Ja
Bedrijfstemperatuur (T-T): -25 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Echo annulatie: Ja
Smartphone-ondersteuning: Ja
Bewegingssensor afstand: 10 m
Bewegingssensor detectiehoek: 110 °
Materiaal behuizing buiteneenheid: Roestvrijstaal

Heb je hulp nodig?

Als je hulp nodig hebt met DoorBird D2101KV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd DoorBird

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd