Dibea D500 Pro Handleiding

Dibea Stofzuiger D500 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Dibea D500 Pro (9 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
D SHAPE
EXCLUSIVE D SE IGN
Instruction Manual
Before using this product, please read the manual
carefully and keep it well so that you can check it at any
time in the future. Please fully understand the content
before the correct use.
D500 Pro
Suzhou Dibea Electrical Technology Co.,Ltd.
Company address: No. 20, Xingnan Road, Wuzhong District,
Suzhou City, Jiangsu Province
Official website:www.dibea.com
Email: info@dibea.com
B4Z6-E1021060
Robot Vacuum Cleaner
1
Contents Safety Instructions
Safety instruction
WARNING:
WARNING:
Product maintenance
Product composition
Product operation
Malfunction routine
Product parameters
Dust bin and filter screen cleaning
Basic safety precautions should always be observed when using an
electrical appliance, including the following to reduce the risk of fire,
electrical shock, or injury.
Children, mentally challenged people or people lack related experience
and knowledge are not allowed to use this product without special
guidance.
Do not use the product somewhere higher than the user in case it drops
off and hurts people.
Do not use the product in open areas without protective guard.
Read this manual carefully.
Keep this manual for further guidance.
Any operations oppose to the description in this user manual may
lead to injury to human or this product.
(1). Only authorized technicians can disassemble the product. Users are not allowed to disassemble or
repair the product.
(2). Only use the original battery and power adaptor of the product for charging. Using other unmatched
adaptor may cause electric shock, fire or product damage.
(3). Do not touch the power cord, plug or adaptor with wet hands.
(4). Do not use near curtains, wrapping materials, or any objects that may be winded in the drive wheels.
(5). Do not use this product near cigarette, lighter, match or any flammables.
(6). If the product needs cleaning, clean it after it is fully charged.
(7). Do not over-bend or put anything heavy or sharp onto the charging cord.
(8). Only use the product indoors. Do not use it outdoors.
(9). This product forbids over 10KG heavy pressure from article or human
(10). Do not use this product in wet or moist environment (e.g. bathroom)
(11). Before using , please remove all fragile items on the ground (such as glasses, lamps, etc.) and items
which can possibly entangle the side brush and block the suction port (such as cables, paper, curtains, etc.)
(12). Do not place this product where it is easy to drop off (tables, stairs, etc)
(13). Before charging, check whether adaptor and outlet are properly connected.
(14). To avoid tripping, inform all the people in the house when the product is working.
(15). When the dust bin is full, empty it before using. (once 1 week)
(16). Use this product in temperature from 0-40℃.
(17). Do not use this product in high-temperature environment.
(18). The battery must be removed from the product before it is scrapped.
(19). The battery should be disposed properly for safety after you change it.
(20). Do not use the product on long plush rugs or dark color floors
Use and cleaning of side brush
Sensor cleaning
Wheel cleaning
Charging pole piece cleaning
Suction port cleaning
Host and accessories
Host diagram
Charging base, dust bin and water tank
Remote controller
The effective method to extend battery life, battery removal and
replacement, quick operation instructions and use of the host key
Precautions
Battery charge
Host key display
Use of water tank
Remote control reservation setting
1
2
3
3
4
4
4
5
6
7
8
9
9-10
11
11
12
12-13
13
14
15
............................................
.......................................
.........................................
...................................................
...................................................
..........................................
...............................................
...............................................
.....................................................
...................................................
...................
...................
..................................................
......................................
..........................................
..........................................
.................................................
....................................................
....................................
.................................................
2 3
PUSH
PUSH
1
2
3
LR
Product Maintenance Product Maintenance
Dust bin and filter screen cleaning
Use and cleaning of side brush
Sensor cleaning
Installation of side brush
Disassembly of side brush
Cleaning of side brush
Notice:
After removing the dust bin, please check whether there is any foreign matter in the
suction port and clean it.
Open it from the flap "PUSH", take out the dust bin, open the door of the dust bin, and
dump the internal garbage.
Hold the small handle of the HEPA and pull out the HEPA.
Wash the dust bin and filter screen with water and pat the accumulated dust on the HEPA.
After cleaning, put the HEPA back into the dust bin in order.
Cover the door of the dust bin and put it into the host.
At the time of installing, it shall be noted that the side
brush should be consistent with the left (L) and right (R)
of the bottom shell, and the parts are marked with "L" and
"R". After one-to-one correspondence, press directly, and
it will be OK after hearing the tone of clasping.
At the time of disassembling, grasp the three brushes at
the same time and pull them up.
Check whether the side brush is damaged or has foreign
matter.
Clean the side brush with a cleaning tool or a piece of
duster cloth.
If crimping or deformation occurs, remove the side brush
and keep it in warm water for about 5s.
When the side brush is damaged and cannot be used,
please replace it in time.
Wipe the sensor with a cleaning tool or a piece of soft cloth, as the below figure show.
Cliff Sensor Collision Rod Light Filter Rear Window
Notice: If L and R are installed incorrectly, the machine will
shake when it runs.
It is recommended to clean the dust bin once a week.
It is recommended to wash the HEPA and filter screen once after using 15 - 30 days.
Before installation, please ensure that the filter screen and the HEPA are in a dry state.
Do not expose the filter screen and HEPA to the sun.
HEPA is a replaceable accessory.

Product specificaties

Merk: Dibea
Categorie: Stofzuiger
Model: D500 Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Dibea D500 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Stofzuiger Dibea

Dibea

Dibea M500 Pro Handleiding

12 Mei 2023
Dibea

Dibea D18E Pro Handleiding

12 Mei 2023
Dibea

Dibea DW300 Pro Handleiding

12 Mei 2023
Dibea

Dibea V008 Pro Handleiding

12 Mei 2023
Dibea

Dibea C17 Handleiding

12 Mei 2023
Dibea

Dibea D18E Handleiding

12 Mei 2023
Dibea

Dibea F6 Handleiding

12 Mei 2023
Dibea

Dibea LW-200 Handleiding

12 Mei 2023
Dibea

Dibea C01 Handleiding

12 Mei 2023
Dibea

Dibea D963 Handleiding

12 Mei 2023

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger

MPM

MPM MOD-49 Handleiding

21 November 2024
VAX

VAX Atractivo VST144VL Handleiding

20 November 2024
Russell Hobbs

Russell Hobbs R-Vac RHRV100 Handleiding

20 November 2024
Shark

Shark Rocket HV380 Handleiding

20 November 2024
Tesla

Tesla RoboStar SP300 Handleiding

20 November 2024
Tefal

Tefal Xtrem Compact TY1238 Handleiding

19 November 2024
Tefal

Tefal Active Power Premium TW4863 Handleiding

19 November 2024
Shark

Shark CarpetXpert EX300UK Handleiding

19 November 2024
Shark

Shark PowerDetect RV2800ZEUK Handleiding

19 November 2024
Shark

Shark StainStriker PX250UKT Handleiding

19 November 2024