DeWalt DW7231 Handleiding

DeWalt Zaagmachine DW7231

Lees hieronder de 📖 handleiding in het Nederlandse voor DeWalt DW7231 (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
DW7231
Miter Saw Mounting Brackets
Dispositifs de fixation de scie à onglet
Soportes de montaje para ingleteadora
2
English
DW7231 Miter Saw Mounting Brackets
A
C
B
FIG. 1
Components List
A. Mounting brackets
B. Release levers
C. Non-marring feet
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258)
WARNING: For your own safety, read the miter stand
instruction manual before using any accessory. Failure to
heed these warnings may result in personal injury and serious
damage to the miter stand and the accessory. When servicing
this tool, use only identical replacement parts.
Tools Required
• Drill with 3/8" (9.5 mm) drill bit (Not required for D WALT Miter E
Saws)
• Crosshead #2 screwdriver
• 1/2" (13mm) Wrench
General Safety Instructions for Stand
Accessories
WARNING: To reduce the risk of personal injury:
• ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
• ALWAYS check the stability of the miter saw stand and the miter
saw attached to it before putting the stand or the saw into use.
• DO NOT mount any power tool other than a miter saw to this
stand. Mounting other power tools to this stand could result in
severe personal injury.
• DO NOT exceed the weight these brackets can hold. Each
bracket can support up to 250 lbs. (113 kg) when loaded directly
over the stand main beam. Do not exceed weight rating of the
stand.
• Follow the mounting instructions carefully. Fasten the miter saw to
the saw mounting brackets securely as instructed.
• DO NOT modify or use stand for operations for which it is
unintended.
• DO NOT use the stand on uneven surfaces. The stand is designed
to be used on a flat, stable surface.
• DO NOT use on a slippery surface. The stand load capacity is
greatly reduced when used on slippery surfaces.
Components (Fig. 1)
WARNING: Never modify the stand or any part of it. Damage or
personal injury could result.
Refer to Figure 1 for Components List.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay attention
to these symbols.
DANGER: Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, result in may minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.

Product specificaties

Merk: DeWalt
Categorie: Zaagmachine
Model: DW7231

Heb je hulp nodig?

Als je hulp nodig hebt met DeWalt DW7231 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine DeWalt

DeWalt

DeWalt DW861 Handleiding

11 September 2024
DeWalt

DeWalt DCS397 Handleiding

15 Juli 2024
DeWalt

DeWalt DCS778 Handleiding

15 Juli 2024
DeWalt

DeWalt DWE249 Handleiding

15 Juli 2024
DeWalt

DeWalt DCMCS574 Handleiding

12 Juni 2024
DeWalt

DeWalt DAH180032 Handleiding

11 Juni 2024
DeWalt

DeWalt DCS378 Handleiding

9 Juni 2024
DeWalt

DeWalt DCS573 Handleiding

3 Juli 2023
DeWalt

DeWalt DCCS623 Handleiding

30 Juni 2023
DeWalt

DeWalt DC310K Handleiding

16 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Makita

Makita DJR187ZK Handleiding

2 December 2024
Fieldmann

Fieldmann FDK 201302-E Handleiding

1 December 2024
Fieldmann

Fieldmann FDP 200805-E Handleiding

1 December 2024
Fieldmann

Fieldmann FZP 4216-B Handleiding

1 December 2024
Fieldmann

Fieldmann FZP 5816-B Handleiding

1 December 2024
King Craft

King Craft ZKGS 4300 UG Handleiding

30 November 2024
Global

Global PSG 750 Handleiding

30 November 2024
Global

Global MTS-G 400 Handleiding

30 November 2024
Global

Global N-PSL 750 Handleiding

30 November 2024
Global

Global PSL-G 750 Handleiding

30 November 2024