DeWalt DW030PL-XJ Handleiding

DeWalt Laserpointer DW030PL-XJ

Lees hieronder de 📖 handleiding in het Nederlandse voor DeWalt DW030PL-XJ (68 pagina's) in de categorie Laserpointer. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/68

Please read these instructions before operating the product.

www.2helpU.com

FIN

DW030PL-XJ

User Manual

DW030

FIN

Downloaded from manuals search enginewww.Manualslib.com

DW030

Figures

USB

DW030

1.89m

Downloaded from manuals search enginewww.Manualslib.com

Contents

• User Safety

• Battery Safety

• Setup

• Operation

• Warranty

• Error Codes

• Specications

Retain all sections of this manual for future reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product. The

person responsible for the product must ensure

that all users understand and adhere to these

instructions.

WARNING:

The following label information is placed on your

laser tool to inform you of the laser class for your

convenience and safety.

The DW030PL-XJ tool emits a visible laser beam, as

shown in Figure A #1. The laser beam emitted is Laser

Class 2 per IEC 60825-1 and complies with 21 CFR

1040.10 and 1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful not

to expose your eyes to the emitting laser beam

(red light source). Exposure to a laser beam

for an extended time period may be hazardous

to your eyes. Do not look into the beam with

optical aids.

WARNING: To reduce the risk of injury, the user

must read the product User Manual and the

Safety Manual.

Setup

Attaching the Wrist Strap

1. While facing the front of the tool, insert the thin end of

the wrist strap through one of the holes in the lower

right corner of the tool.

2. Push the thin end of the wrist strap until it goes

through the other hole.

3. Separate the two wires, which make up the thin end

of the wrist strap, to form a loop.

4. Insert the thick end of the wrist strap all the way

through the loop in the thin end, so the wrist strap is

securely fastened to the tool (Figure B).

Charging the Battery

1. Locate the port cover on the side of the tool (Figure

A #4).

2. Using your finger, gently pull the port cover down

(Figure E #1).

3. Insert the small end of the USB Recharge Cable into

the port on the side of the tool, making sure to insert

the flat side of the cable into the flat side of the port

(Figure E #2).

4. Insert the USB end of the cable into a USB port in

a computer or USB power outlet (Figure E #3).

5. Wait approximately 2.5 hours for the battery to fully

charge and then disconnect the USB Recharge

Cable.

When the tool is ON, the battery level appears in the

display window (Figure D #1).

Downloaded from manuals search enginewww.Manualslib.com

Product specificaties

Merk:	DeWalt
Categorie:	Laserpointer
Model:	DW030PL-XJ
Kleur van het product:	Black, Orange
Gewicht:	32 g
Breedte:	98 mm
Diepte:	18 mm
Hoogte:	127 mm
Soort:	Lijnlaser
Stroombron:	Batterij/Accu
Maximumbereik:	9 m
Nivellering accuratesse (±):	6 mm/m
Zelfnivellerings bereik (±):	- °
Ondersteuning voor statiefmontage:	Nee
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	Ingebouwde accu