DeWalt DCN681B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor DeWalt DCN681B (52 pagina's) in de categorie Nietmachine. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contĂĄctenos.
1-800-4-D WALTe
Instruction Manual
Guide D’utilisation
Manual de instrucciones
DCN681
20V MAX* Cordless 18GA Narrow Crown Stapler
Agrafeuse à couronne étroite sans fil, calibre18, 20V MAX*
Engrapadora inalĂĄmbrica para grapas de corona estrecha de
calibre 18 de 20 V MÁX*
final page size: 8.5 x 5.5 in
English
English (original instructions) 1
Français (traduction de la notice d’instructions originale) 16
EspaĂąol (traducido de las instrucciones originales) 32
ENGLISH
1
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: will Indicates an imminently hazardous situation which, if not avoided, result in death or seriousinjury.
WARNING: could Indicates a potentially hazardous situation which, if not avoided, result in death or seriousinjury.
CAUTION: may Indicates a potentially hazardous situation which, if not avoided, result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: may propertydamage Indicates a practice which, if not avoided, not related to personal injury result in .
WARNING! Read all safety warnings
and allinstructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or seriousinjury.
WARNING: To reduce the risk of injury, read
the instructionmanual.
If you have any questions or comments about
this or any
D WALTe
tool, call us toll free at:
1-800-4-
D WALTe
(1-800-433-9258).
1 Trigger
2 Trigger lock-off
3 Depth adjustment wheel
4 Headlights/Low battery/
Stallindicator
5 Contact trip
6 Sliding magazine
7 Bump/Sequential
selectorswitch
8 Reversible belt hook
9 No-mar pad
10 No-mar pad storage
11 Stall release lever
12 Staple depth indicator
13 Battery
14 Battery release button
15 Magazine latch
16 Fastener Window
Fig. A
1
2
4
14
13
8
7
11
6
16
15
59
103
12
English
4
• Always use trigger lock-off when tool is not in
immediate use. trigger lock-offUsing the will prevent
accidentaldischarge.
• Do not overreach. Maintain proper footing and balance
at all times. Loss of balance may cause personalinjury.
• Use the tool only for its intended use. Do not
discharge fasteners into open air, concrete, stone,
extremely hard woods, knots or any material too
hard for the fastener to penetrate. Do not use the
body of the tool or top cap as a hammer. Discharged
fasteners may follow unexpected path and
causeinjury.
• Always keep fingers clear of contact trip to prevent
injury from inadvertent release of the Pusher
• andRefer to the Maintenance Repairs sections for
detailed information on the proper maintenance of
thetool.
• Always operate the tool in a clean, lighted area.
Be sure the work surface is clear of any debris and be
careful not to lose footing when working in elevated
environments such asrooftops.
• Do not drive fasteners near edge of material. The
workpiece may split causing the fastener to ricochet,
injuring you or a co-worker. Be aware that the staple
may follow the grain of the wood (shiner), causing it to
protrude unexpectedly from the side of the work material.
Drive the chisel point of the staple perpendicular to the
grain to reduce risk ofinjury.
• Do not drive staples onto the heads of other
fasteners or with the tool at too steep an angle.
Personal injury from strong recoil, jammed fasteners, or
ricocheted staples mayresult.
• Keep hands and body parts clear of immediate work
area. Hold workpiece with clamps when necessary to
keep hands and body out of potential harm. Be sure the
workpiece is properly secured before pressing the stapler
against the material. The contact trip may cause the work
material to shiftunexpectedly.
• Do not use tool in the presence of flammable dust,
gases or fumes. The tool may produce a spark that could
ignite gases causing a fire. Driving a staple into another
staple may also cause aspark.
• Keep face and body parts away from back of the tool
cap when working in restricted areas. Sudden recoil
can result in impact to the body, especially when stapling
into hard or densematerial.
• Grip tool firmly to maintain control while allowing
tool to recoil away from work surface as fastener
is driven. In Bump mode if contact trip is allowed to
recontact work surface before trigger is released an
unwanted fastener will bedriven.
• Choice of triggering method is important. Check the
manual for triggeringoptions.
Sequential/Bump Selector Switch
Sequential Action
• When using the tool in sequential mode mode, do
not actuate the tool unless the tool is placed firmly
against the workpiece.
Bump Action
• When using the tool in bump action, be careful of
unin tentional double fires resulting from tool recoil.
Unwanted fasteners may be driven if the contact trip is
allowed to accidentally re-contact the work surface.
• To Avoid Double Fires:
Ęľ Do not engage the tool against the work surface with
a strong force.
Ęľ Allow the tool to recoil fully after each actuation.
Ęľ Use tool in sequential mode.
• When “bump” actuating the finish stapler, always
keep tool in control. Inaccurate placement of tool can
result in misdirected discharge of a fastener.
• Do not drive staples onto the heads of other
fasteners. Strong recoil, jammed fasteners, or ricocheted
staples may result.
• Be aware of material thickness when using stapler. A
protruding staple may cause injury.
• Depth adjustment: To reduce risk of serious injury
from accidental actuation when attempting to
adjust depth, ALWAYS;
Ęľ Remove battery pack.
Ęľ Engage trigger lock.
Ęľ Avoid contact with trigger during adjustments
• Do not drive staples blindly into walls, floors or
other work areas. Fasteners driven into live electrical
wires, plumbing, or other types of obstructions can result
ininjury.
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention
while operating power tools may result in serious
personalinjury.
Additional Safety Information
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETYEQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratoryprotection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to the State
of California to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicalsare:
• lead from lead-based paints,


Product specificaties

Merk: DeWalt
Categorie: Nietmachine
Model: DCN681B

Heb je hulp nodig?

Als je hulp nodig hebt met DeWalt DCN681B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Nietmachine DeWalt

Handleiding Nietmachine

Nieuwste handleidingen voor Nietmachine