Denver MMP-351 Handleiding

Denver Hifi systeem MMP-351

Lees hieronder de đź“– handleiding in het Nederlandse voor Denver MMP-351 (9 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
English - 1
LOCATION OF CONTROLS
1. Power Button
2. Function Switch (CD，MP3 /
TAPE /RADIO)
3. Band Switch
4. Bass Boost Button
5. Volume Control Knob
6. Tuning Knob
7. CD/MP3 LED Display
8. Dial Pointer
9. CD/MP3 Play/Pause Button
10. CD/MP3 Stop Button
11. CD/MP3 MODE Button
12. CD/MP3 “+10” Button
13. CD/MP3 Skip/Search Forward
Button 
14. CD/MP3 Skip/Search Backward
Button 
15. Power/Standby LED Indicator
16. INTO LED Indicator
17. RANDOM LED Indicator
18. MP3 LED Indicator
19. FM Stereo LED Indicator
20. Cassette Compartment
21. Cassette Key Control Door
22. Mic Jack
23. Cassette Record Button
24. Cassette Play Button
25. Cassette Rewind Button
26. Cassette Fast Forward Button
27. Cassette Stop/Eject Button
28. Cassette Pause Button
29. Stereo Headphone Jack
30. CD Door
31. Speaker Terminal (L/R)
32. Remote Sensor
33. AC Power Cord
34. FM Antenna
35. Speaker Box Left
36. Speaker Box Right
37. Program LED Indicator
38. Repeat LED Indicator
English - 2
AC OPERATION
Before operating, please check carefully that the voltage indicated on your
set corresponds to the voltage of your local area.
1. Plug the AC POWER CORD into a standard AC outlet.
2. Press the POWER button to start the unit.
POWER/STANDBY LED indicator will light-up to indicate unit is connected
to the power source properly.
SPEAKER BOX CONNECTION
Insert the SPEAKER PLUG of the SPEAKER BOXES to the SPEAKER TERMINAL
on the rear of the unit.
RADIO OPERATION
1. Slide the FUNCTION switch to the “RADIO” position.
2. Slide the BAND switch to the desired waveband.
3. Turn the TUNING knob to your desired radio station.
4. Adjust the sound level by pressing the VOLUME control knob Up or Down.
5. To turn off the radio, press the POWER button to “OFF” position.
FM STEREO INDICATOR
Slide the BAND switch to FM ST. position, the FM STEREO indicator will light
when listening to a strong station that is broadcasting in stereo. When the FM
stereo reception is weak, slide the BAND switch to FM position, in this case
this reception will be monaural.
ANTENNAS
For best reception, fully extend the FM Antenna to receive FM stations. For
AM reception, the unit has a built-in antenna, and it may be necessary to turn
the whole unit for best reception.
BASS BOOST
At all volume levels, push the BASS BOOST button to “ON” position to
enhance the low frequency sound. To release the super bass, simply push
this button once again.
MIC JACK
Connect Dynamic hand microphone to MIC JACK for Mic recording.
English - 3
STEREO HEADPHONE JACK
For private listening, insert the plug of a pair of stereo headphone into the
STEREO HEADPHONE JACK and adjust the VOLUME CONTROL knob
accordingly. During the use of a headphone, the Speakers will be
automatically disconnected.
CASSETTE OPERATION
Tape Playback
1. Press the STOP/EJECT button to open the cassette door.
2. Insert a pre-recorded cassette tape into the CASSETTE COMPARTMENT
and close the cassette door.
3. Slide the FUNCTION switch to the TAPE position.
4. Press the PLAY button.
5. Adjust the VOLUME CONTROL knob to your desired listening level.
6. To stop the tape, press the STOP/EJECT button.
7. Press the STOP/EJECT button again to open the cassette door.
Fast Forward and Rewind
The tape can be fast forwarded or rewound by pressing the FAST FORWARD
button or REWIND button respectively.
Pause Function
During playback or recording, the tape can be stopped temporarily by
pressing the PAUSE button. To continue playback or recording, press the
PAUSE button again.
Auto Stop System
When the tape runs to the end during playback or recording, the cassette
operation will be stopped automatically.
Note : When fast forwarding or rewinding, the STOP button must be
pressed when the tape runs to the end.
CAUTION
To avoid damage to the cassette mechanism or to the cassette tapes, always
press the STOP/EJECT button between each operation!
RECORDING FROM THE RADIO
1. Tune to a desired radio program as described in the “RADIO OPERATION”
section.
2. Insert a blank cassette tape into the CASSETTE COMPARTMENT.
3. Press the PAUSE button.

Product specificaties

Merk: Denver
Categorie: Hifi systeem
Model: MMP-351

Heb je hulp nodig?

Als je hulp nodig hebt met Denver MMP-351 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem Denver

Denver

Denver MCA-240 Handleiding

21 Februari 2025
Denver

Denver MCU-5501 Handleiding

21 Juni 2023
Denver

Denver MRD-166 Handleiding

15 Juni 2023
Denver

Denver MCU-5301 Handleiding

26 Mei 2023
Denver

Denver MCI-102 Handleiding

29 April 2023
Denver

Denver MDA-240 Handleiding

18 April 2023
Denver

Denver MCA-230 MK2 Handleiding

14 April 2023
Denver

Denver MC-5010 MK2 Handleiding

23 Maart 2023
Denver

Denver MCA-180 Handleiding

15 Maart 2023
Denver

Denver TCD-33 Handleiding

14 Maart 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Philips

Philips AX2330 Handleiding

16 Maart 2025
Proscan

Proscan PRCD682BT Handleiding

10 Maart 2025
DAP Audio

DAP Audio MP-300SBU Handleiding

4 Maart 2025
Morel

Morel USUB 1003 Handleiding

4 Maart 2025
NEAR

NEAR SCAPES IG44.1DSP Handleiding

28 Februari 2025
Pro-Ject

Pro-Ject Amp Box RS2 Handleiding

27 Februari 2025
Alto

Alto Stealth Wireless Pro Expander Pack Handleiding

25 Februari 2025
Pronomic

Pronomic Mini6 Handleiding

19 Februari 2025
Beatfoxx

Beatfoxx MC-DVD-90 Handleiding

19 Februari 2025
AVer

AVer AmpliWave Go Handleiding

19 Februari 2025