Denver DAB-33 MK2 Handleiding

Denver Radio DAB-33 MK2

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver DAB-33 MK2 (4 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 121 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

ENG

DENVER DAB-33

SAFETY PRECAUTIONS

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features,

please read this manual carefully before attempting to operate the unit

Important Notes

This safety and operating instruction should be retained for future reference.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on apparatus. Avoid installing the unit in locations described below:

- Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters,

top of other stereo equipment that radiate too much heat.

- Places blocking ventilation or dusty places.

- Places subject to constant vibration, humid or moist places.

No naked flame sources such as lighted candles should be placed on the unit.

Attention should be drawn to the environmental aspects of battery disposal.

Make sure not to obstruct the ventilation openings, a minimum of 10cm should be kept around the

apparatus for ventilation.

The ventilation should not be impeded by covering the ventilation openings with items such as

newspaper, table-cloths, curtains, etc. Use apparatus in moderate climates only.

Operate tuning controls and switches as instructed in the manual.

The AC/DC adaptor is used as the disconnect device. It shall remain readily operable and should not be

obstructed during intended us

To be completely disconnected the apparatus from supply mains, the AC/DC adaptor of the apparatus

shall be disconnected from the mains socket outlet completely.

The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so,

simply reset the product to resume normal operation by following the instruction manual. In case the

function could not resume, please use the product in other location.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts

inside, refer all servicing to qualified service personnel

CAUTION

RISK OF

ELECTRIC

SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK),

NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

DANGEROUS VOLTAGE

Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of

electric shock to persons is present within this product's enclosure.

ATTENTION

The owner's manual contains important operating and maintenance instructions, for your

safety, it is necessary to refer to the manual.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

DRIPPING OR SPLASHING.

Note: This unit will become warm when used for a long period of time. This is normal and does not

indicate a problem with the unit. This unit includes micro-processors which may malfunction as a result

of external electrical interference/ noise or electrostatic discharge. If the unit is not working properly,

disconnect the power source and then reconnect it.

ENG

Front view

Side view

Rear view

1. SPEAKER

2. STANDBY BUTTON

3. TUN/CH BUTTON 

4. LCD DISPLAY

5. VOL+ BUTTON

6. MENU/INFO BUTTON

7. PRESET BUTTON

8. SELECT BUTTON

9. TUN/CH BUTTON 

10. MODE BUTTON

11. VOL- BUTTON

12. HEADPHONE JACK

13. DC INPUT SOCKET

14. ANTENNA

15. BATTERY DOOR

SWITCHING YOUR RADIO ON FOR THE FIRST TIME

AC Operation

1. Insert the DC power jack of AC/DC adaptor to the DC input socket located at the right of the radio.

2. Plug the AC/DC Adaptor to the AC mains outlet.

3. Press the STANDBY to turn the radio on.

Remarks: If the AC Adaptor voltage is over than 6V, it will possible make the line damage.

DC (battery) operation

1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.

2. Installed the batteries (4×1.5V UM3/AA battery) into the battery compartment.

3. Press the STANDBY to turn the radio on.

Remarks: To obtain the best performance in DC operation, the use of alkaline batteries is highly

recommended.

Display backlight

When the radio is in AC mode, the display backlight will be full brightness all the time.

When the radio is in DC battery operation, the display backlight will be turned on to full brightness for

around 10 seconds and then go to dim, it will then be turned on to full brightness again for 10 seconds

on every key press. In STANDY mode, the radio and display backlight will be turn off.

DAB mode

Press the STANDY button to turn the unit on, it will automatically enter into the DAB mode and perform

auto scan function, During the scan the display show “Scanning…” together with a slide bar that

indicates the progress of the scan and the amount of stations that have been found so far.(F.1) (F.2)

Once the scan has finished, the radio will select the first alphanumerically found station. You can now

press the TUN/CH



 or TUN/CH



 button to explore the found stations followed by pressing the

SELECT button to select listening to the stations.

Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu,

you can now press the or TUN/CH



 TUN/CH



 button to select “Manual tune” or “Full scan” for stations.

F.1 F.2

DAB Auto Scan

The auto scan will search for the entire DAB Band III channels, after the scan has finished, the first

alphanumerically found stations will be automatically selected.

1. To activate auto scan, to enter into press and hold the MENU/INFO button for longer than 2 seconds

the Menu and then press the TUN/CH



 or TUN/CH



 button to select “Full scan”, finally press the

ENG

SELECT button to confirm, the display will show “Scanning…” and a pressing slide bar.(F.3)

2. All the stations that have been found will be stored automatically, to explore the stations that have

been found, press the or button and when you find a station that you would TUN/CH



 TUN/CH





like to listen to, press the SELECT button.

FM radio

1. To select FM, press the MODE button, the display will show FM and the frequency.

2. To activate auto search, press SELECT or press and hold the TUN/CH



 or TUN/CH



 button until it

stars to scan up or down the frequency band. The display will show ”Scanning…”, and it will stop

automatically once a station has been found.(F.6) (F.7).

F.6

F.7

3. To search manually, press the TUN/CH TUN/CH



 or 



 button to increment the frequency by

0.05MHz.

Scan setting

1. To activate Scan setting, to enter press and hold the MENU/INFO button for longer than 2 seconds

into the Menu and then press the or TUN/CH



 TUN/CH



 button to select “scan setting”, finally

press the SELECT button to confirm, Press the TUN/CH



 



 or TUN/CH button to select “All

stations/strong stations”. Press the SELECT button to confirm the setting.

STORING AND RECALLING STORED STATIONS

This function allows up to 10 stations to be programmed into the memory and stored in both DAB and

FM mode

1. To store a preset, first tune to your desired station, then press and hold the for longer than 2 PRESET

seconds, the display will show the flashing “Preset Store number” (F8).

2. Press the TUN/CH



 or TUN/CH



 button to select your desired station preset number.

3. Press the SELECT to confirm your selection, the station now broadcasting has now been stored in

the selected location (F9).

4. To listen to the preset stations, first press the PRESET button once and then then press the

TUN/CH



 or TUN/CH



 button to scroll up or down the presets that you have stored, and press the

SELECT button to confirm. The station name or frequency and preset location number will be

displayed in the lower half of the display (F10). If the preset has not been allocated ‘Preset Recall #:

(Empty)’, “Preset empty” will be shown in the display.

#10

FACTORY RESET

If moving the radio to another location in the country the pre-tuned and stored DAB stations may no

longer be available and it will be necessary to reset the radio back to the factory settings.

1. Connect the radio to AC mains (via AC/DC adaptor), then press STANDBY to turn the radio on

2. MENU/INFO Press and hold the button for longer than 2 seconds, then

press MENU/INFO button, press the TUN/CH



 or TUN/CH



 button to

until the display show “system”, then press the SELECT button

3. Continue press the or button until the display TUN/CH



 TUN/CH





shows “<Factory Reset>” and then press the SELECT button to confirm.

4. The display is now showing “Factory Reset <No> Yes’ and Rotate press

the or button to confirm “<Yes>” and press the TUN/CH



 TUN/CH





SELECT button again.

Product specificaties

Merk:	Denver
Categorie:	Radio
Model:	DAB-33 MK2
Kleur van het product:	Wit
Ingebouwd display:	Ja
Gewicht:	480 g
Breedte:	50 mm
Diepte:	180 mm
Hoogte:	105 mm
Breedte verpakking:	64 mm
Diepte verpakking:	267 mm
Hoogte verpakking:	113 mm
Stroombron:	AC/Batterij
Type aansluitplug:	3,5 mm
Inclusief AC-adapter:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	1 W
Aantal ingebouwde luidsprekers:	1
Ondersteund aantal accu's/batterijen:	4
Volumeregeling:	Digitaal
Hoofdtelefoonuitgangen:	1
Soort tuner:	Digitaal
Soort antenne:	Extern
Backlight:	Ja
Backlight-kleur:	Blauw
Klok functie:	Ja
Inclusief dockingstation:	Nee
Thermometer:	Nee
MP3 afspelen:	Nee
Ondersteunde frequentiebanden:	DAB+, FM
Aantal voorkeurszenders:	20
Radio:	Draagbaar
Compatibele batterij grootte:	AA
Inclusief RDS tuner:	Ja
Projectie:	Nee
Apple docking-compatibiliteit:	Niet ondersteund
Kleuring:	Monochromatisch
Hoeveelheid per (buitenste) hoofdverpakking:	8 stuk(s)
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Type beeldscherm:	LCD
Producten per intermodale container (40 ft - High Cube):	23900 stuk(s)
Producten per intermodale container (20 ft):	9800 stuk(s)